Enable ASan, this can greatly help identify leaks and buffer overflows.
Running unit tests relying on multiprocess is unreliable with ASan
enabled, so skip them.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
As described in bugzilla, ASan reports accesses to all memory segment as
invalid, since those parts have not been allocated with rte_malloc.
Move __rte_no_asan to rte_common.h and disable ASan on a part of the test.
Bugzilla ID: 880
Fixes: 6cc51b1293 ("mem: instrument allocator for ASan")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
In hash_readwrite_perf_autotest a single read and write operation is
benchmarked for both HTM and non HTM cases. However the result summary
only shows the HTM value. Therefore add the non HTM value for
completeness.
Fixes: 0eb3726ebc ("test/hash: add test for read/write concurrency")
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
Added tunnel and transport AH known test vectors for
SHA256 HMAC.
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added auth only and null cipher + auth under combined mode
for following combinations.
1. Tunnel IPv4
2. Transport IPv4
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
test_bpf_convert is being conditionally registered depending on the
presence of RTE_HAS_LIBPCAP except the UT unconditionally lists it as a
test to run.
When the UT runs test_bpf_convert test-dpdk can't find the registration
and assumes the DPDK_TEST environment variable hasn't been defined
resulting in test-dpdk dropping to interactive mode and subsequently
waiting for the remainder of the UT fast-test timeout period before
reporting the test as having timed out.
* unconditionally register test_bpf_convert,
* if ! RTE_HAS_LIBPCAP provide a stub test_bpf_convert that reports the
test is skipped similar to that done with the test_bpf test.
Fixes: 2eccf6afbe ("bpf: add function to convert classic BPF to DPDK BPF")
Cc: stable@dpdk.org
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
If conversion of cBPF to eBPF fails (in rte_bpf_convert)
then the test should not try and print the result.
Coverity issue: 373661
Fixes: 2eccf6afbe ("bpf: add function to convert classic BPF to DPDK BPF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The node clone API parameter 'name' is the new node's postfix name, not
the final node name, so it makes no sense to check it. And the new name
will be checked duplicate when calling API '__rte_node_register'.
And update the test case to call clone API twice to check the real name
duplicate.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Constant value 1 has a size of 32 bits, and shifting it more than 32 bits
to the left overflows. 1ULL is needed to be able to get a 64-bit value.
Coverity ID: 375846
Fixes: 8751a7e983 ("efd: allow more CPU sockets in table creation")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
If a initial process for the bonding device is like:
rte_eth_dev_configure
rte_eth_dev_set_mtu
queue setup and start, etc.
Pass the vdev args to application, and init bonding device only.
-a 0000:af:00.0 --vdev="net_bonding0,mode=2,slave=0000:af:00.0"
It will fail and complain for the slave device
"Port 0 must be configured before MTU set"
Test can be reproduced with ovs.
Fixes: b26bee10ee ("ethdev: forbid MTU set before device configure")
Cc: stable@dpdk.org
Signed-off-by: Junjie Wan <wanjunjie@bytedance.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
Added test case to verify L4 checksum offload in IPsec transport mode.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Add test cases to verify TTL and hop limit decrement with lookaside
IPsec offload.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
This patch fixes misspelled RTE_RSA_KEY_TYPE_QT,
this will prevent checkpach from complaining wherever
change to RSA is being made.
Fixes: 26008aaed1 ("cryptodev: add asymmetric xform and op definitions")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add test cases to verify copy and set DSCP with
IPv4 and IPv6 tunnels.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
For some DMA HW devices, e.g. those using the idxd driver, the maximum
burst size is configurable, which can lead to test failures if the value
is set too small. Add explicit check for this to give reasonable error
messages for devices which need their config adjusted.
Fixes: 1b86a66a30 ("test/dma: add more comprehensive copy tests")
Fixes: 8fa5d26839 ("test/dma: add burst capacity test")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Rather than the asym session create function returning a session on
success, and a NULL value on error, it is modified to now return int
values - 0 on success or -EINVAL/-ENOTSUP/-ENOMEM on failure.
The session to be used is passed as input.
This adds clarity on the failure of the create function, which enables
treating the -ENOTSUP return as TEST_SKIPPED in test apps.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
A user data field is added to the asymmetric session structure.
Relevant API added to get/set the field.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The rte_cryptodev_asym_session structure is now moved to an internal
header. This will no longer be used directly by apps,
private session data can be accessed via get API.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Rather than using a session buffer that contains pointers to private
session data elsewhere, have a single session buffer.
This session is created for a driver ID, and the mempool element
contains space for the max session private data needed for any driver.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The programmer's guide for cryptodev included sample code for using
Asymmetric crypto. This is now replaced with direct code from the test
application, using literal includes. It is broken into snippets as the
test application didn't have all of the required code in one function.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Fix out of place scatter gather list in sym raw datapath unit test.
Fixes: cd8166c28c ("test/crypto: add raw API test for dpaax")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Functions like free, rte_free, and rte_mempool_free
already handle NULL pointer so the checks here are not necessary.
Remove redundant NULL pointer checks before free functions
found by nullfree.cocci
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
When allocating a mbuf, its data content is most of the time zero'd but
nothing ensures this. This is especially wrong when building with
RTE_MALLOC_DEBUG, where data is poisoned to 0x6b on free.
This test reserves MBUF_TEST_DATA_LEN2 bytes in the mbuf data segment,
and sets this data to 0xcc.
Calling strlen(), the test may try to read more than MBUF_TEST_DATA_LEN2
which has been noticed when memory had been poisoned.
The mbuf data content is checked right after, so we can simply remove
strlen().
Fixes: 7b295dceea ("test/mbuf: add unit test cases")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Expose Linux EAL ability to reuse existing hugepage files
via --huge-unlink=never switch.
Default behavior is unchanged, it can also be specified
using --huge-unlink=existing for consistency.
Old --huge-unlink switch is kept,
it is an alias for --huge-unlink=always.
Add a test case for the --huge-unlink=never mode.
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Memory allocator performance is crucial to applications that deal
with large amount of memory or allocate frequently. DPDK allocator
performance is affected by EAL options, API used and, at least,
allocation size. New autotest is intended to be run with different
EAL options. It measures performance with a range of sizes
for dirrerent APIs: rte_malloc, rte_zmalloc, and rte_memzone_reserve.
Work distribution between allocation and deallocation depends on EAL
options. The test prints both times and total time to ease comparison.
Memory can be filled with zeroes at different points of allocation path,
but it always takes considerable fraction of overall timing. This is why
the test measures filling speed and prints how long clearing takes
for each size as a reference (for rte_memzone_reserve estimations
are printed).
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Enable a subset of unit tests for Windows CI
- For driver tests, driver owners should enable corresponding tests when
enabling driver for Windows.
- For dump tests, currently the tests hang on Windows which require
further investigation.
- For telemetry tests, it has POSIX socket specific codes which require
replacement for Windows. Will investigate and work on a separate patch.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
- Add python script to check if system supports hugepages
- Remove corresponding .sh script
- Replace calling of .sh with corresponding .py in meson.build
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Skip tests which are not yet supported for Windows:
- The libraries that tests depend on are not enabled on Windows yet
- The tests can compile but with issue still under investigation
* test_func_reentrancy:
Windows EAL has no protection against repeated calls.
* test_lcores:
Execution enters an infinite loops, requires investigation.
* test_rcu_qsbr_perf:
Execution hangs on Windows, requires investigation.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Add prefix to resolve name collision on Windows.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Remove two alarm_autotest test cases which do bogus range check
on Windows.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
On Windows, strerror returns just "Unknown error" for errnum greater
than MAX_ERRNO, while linux and freebsd returns "Unknown error <num>",
which is the current expectation for errno_autotest. Differentiate
the error string on Windows to remove a "duplicate error code" failure.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
DPDK logs_autotest on Windows failed at "dynamic log types" tests.
The failures are on 2 test cases for rte_log_set_level_regexp API,
due to regular expression is not supported on Windows in DPDK yet
and regcomp/regexec are just stubs on Windows (in regex.h).
In app/test/test_logs.c, ifndef these two test cases, and for the
rte_log_set_level_pattern validation case following these two cases,
differentiate the expected log level passed into macro CHECK_LEVELS
Now logs_autotest completes for all dynamic log types and static log types.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Even though test_interrupts.c can compile on Windows, skip interrupt
tests for now since majority of eal_interrupt on Windows are stubs.
Will remove the skip after interrupt being fully enabled on Windows.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
- Replace POSIX-specific code with DPDK equivalents or
conditionally disable it on Windows
- Use NUL on Windows as /dev/null for Unix
- Exclude tests not supported on Windows yet
* multi-process
* PMD performance statistics display on signal
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
"What gets measured gets done."
This patch adds mempool performance tests where the number of objects to
put and get is constant at compile time, which may significantly improve
the performance of these functions. [*]
Also, it is ensured that the array holding the object used for testing
is cache line aligned, for maximum performance.
And finally, the following entries are added to the list of tests:
- Number of kept objects: 512
- Number of objects to get and to put: The number of pointers fitting
into a cache line, i.e. 8 or 16
[*] Some example performance test (with cache) results:
get_bulk=4 put_bulk=4 keep=128 constant_n=false rate_persec=280480972
get_bulk=4 put_bulk=4 keep=128 constant_n=true rate_persec=622159462
get_bulk=8 put_bulk=8 keep=128 constant_n=false rate_persec=477967155
get_bulk=8 put_bulk=8 keep=128 constant_n=true rate_persec=917582643
get_bulk=32 put_bulk=32 keep=32 constant_n=false rate_persec=871248691
get_bulk=32 put_bulk=32 keep=32 constant_n=true rate_persec=1134021836
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Meson 0.61.1 is giving warnings that the calls to run_command do not
always explicitly specify if the result is to be checked or not, i.e.
there is a missing "check" parameter. This is because the default
behaviour without the parameter is due to change in the future.
We can fix these warnings by explicitly adding into each call whether
the result should be checked by meson or not. This patch therefore
adds in "check: false" to each run_command call where the result is
being checked by the DPDK meson.build code afterwards, and adds in
"check: true" to any calls where the result is currently unchecked.
Bugzilla ID: 921
Cc: stable@dpdk.org
Reported-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Add test cases to verify copy DF and set DF options
with lookaside IPsec offload.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add known vector test cases for NULL cipher + AES-XCBC.
Also add both algos to the combined mode list of algos.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Skipping NULL authentication in ICV corruption test case
for lookaside IPsec testsuite.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add fragmented plain packet test case in combined mode.
The test case leverages combined mode framework to generate
IPsec packet from a fragment and verify that headers are formed
correctly. The IPsec packet would be decapsulated and the plain
packet is compared against the original packet.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add IPsec AES-CTR test case for combined mode
in lookaside IPsec testsuite.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added IPsec transport mode test cases for IPv4 packets
in the test app.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added fragmented plain packet known vector test case in
IPsec outbound. The test case sends a fragmented packet
and ensures that the IPsec packet generated has correct
fragmentation fields (ie, the IPsec packet is not fragmented)
by comparing against the known vector.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Test app is updated with lookaside IPsec HMAC-SHA384/512
known vectors test cases.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added IPv6 known vector and combined mode tests.
Following modes are added:
Tunnel IPv6 in IPv6
Tunnel IPv4 in IPv4
Tunnel IPv4 in IPv6
Tunnel IPv6 in IPv4
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
