Update attributes to pools used by NIX so that we
can later identify which mempools are packet pools
and which are used for Inline IPsec enabled ethdev.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add support to set/get per-aura buf type with refs and
get sum of all aura limits matching given buf type mask
and val.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Reserve AURA id 0 on cn10k and provide mechanism to specifically
allocate it and free it via roc_npa_* API's.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Similar to other RQ's, delay inline device RQ until dev is started
to avoid traffic reception when device is stopped.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Limit meta AURA workaround to CN10K A0.
Also other NIX and Inline related Erratas applicable for CN10K A1.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Fix missing FC wait for outbound path in vector mode.
Currently only poll mode has it.
Fixes: 358d02d20a ("net/cnxk: support flow control for outbound inline")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Updates CPT inbound inline IPsec configuration mailbox
to provide opcode and CPT credit from VF.
This patch also adds mailbox for reading inbound IPsec
configuration.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Updating the logic for getting part and pass value for cn10k family,
as device tree compatible logic does not work in VMs.
Scanning all the PCI device and detect first RVU device, subsystem
device file gives part no and revision file provide pass information.
Fixes: 014a9e222b ("common/cnxk: add model init and IO handling API")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
A recent change removed errno.h from rte_common.h.
x86 EAL headers seem to include it (probably via
rte_spinlock/rte_cpuflags) but other architectures won't.
Add an explicit inclusion.
Fixes: d826133ae8 ("net/octeon_ep: support CN10K SoC")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Add FC check in vector event Tx path, the check needs to be
performed after head wait right before LMTST is issued.
Since, SQB pool FC updates are delayed w.r.t the actual
utilization of pool add sufficient slack to avoid overflow.
Added a new device argument to override the default SQB slack
configured, can be used as follows:
-a 0002:02:00.0,sqb_slack=32
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add support to enable PTP per ethernet device when that
specific ethernet device is connected to event device via
Rx adapter.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
This patch adds the required functionality in the Octeon endpoint
driver to support the CN10K endpoint device. It adds the CN10K SoC
specific routines to configure, enable, and disable input and output
queues to establish basic data transfers.
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Correct the partnumber value for CN103xx.
Fixes: dd462f68f0 ("common/cnxk: support CN103XX platform")
Cc: stable@dpdk.org
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Changed log level from info to debug for a log message
printed during MCAM allocation.
Fixes: 1f66919817 ("common/cnxk: improve MCAM entries management")
Cc: stable@dpdk.org
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kiran Kumar K <kirankumark@marvell.com>
Added functionality to update link speed, duplex mode and link state.
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Acked-by: Veerasenareddy Burru <vburru@marvell.com>
This patch renames octeon end point driver from octeontx_ep to
octeon_ep to enable single unified driver to support current
OcteonTx and future Octeon PCI endpoint NICs to reflect common
driver for all Octeon based PCI endpoint NICs.
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Acked-by: Veerasenareddy Burru <vburru@marvell.com>
Add to read link status register of UTP mode, to ensure link status of
mixed mode, for YT PHY.
Fixes: 1c44384fce ("net/ngbe: support custom PHY interfaces")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Remain the same max frame size after the device restarts.
Fixes: 07baabb6a5 ("net/ngbe: support MTU set")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Since firmware does not use the semaphore between software and firmware.
Remove useless unilateral semaphore setting.
Fixes: f501a195bd ("net/ngbe: initialize and validate EEPROM")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Rename rx_oversize_errors to rx_oversize_cnt since it depends on giant
packet size limit instead of MTU, by hardware design.
Rename rx_drop_packets and tx_drop_packets to rx_dma_drop and tx_dma_drop
to indicate the drop location.
And add tx_dma_drop to extended statistics.
Fixes: 8b433d04ad ("net/ngbe: support device xstats")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Rename rx_oversize_errors to rx_oversize_cnt since it depends on giant
packet size limit instead of MTU, by hardware design.
Rename rx_drop_packets to rx_rdb_drop to indicate the drop location.
And add rx_dma_drop to extended statistics.
Fixes: 91fe49c87d ("net/txgbe: support device xstats")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Since firmware does not use the semaphore between software and firmware.
Remove useless unilateral semaphore setting.
Fixes: 35c90ecccf ("net/txgbe: add EEPROM functions")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Convert the correct packet type and flow type, to fix IPv6 rule in FDIR.
Fixes: b973ee2674 ("net/txgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Prepend `0x` to the NFP HWINFO header value that is printed to improve
the readability of the printed statement.
Fixes: c7e9729da6 ("net/nfp: support CPP")
Cc: stable@dpdk.org
Signed-off-by: James Hershaw <james.hershaw@corigine.com>
Reviewed-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Previously the nfp driver has supported NFP chips with the Netronome
PCIe ID. This patch extends the PMD to also support NFP chips with the
Corigine PCIe vendor ID (0x1da8), which at this point are assumed to be
otherwise identical from a software perspective.
Signed-off-by: James Hershaw <james.hershaw@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Nfp log print was controlled by nfp's own macro before. This
commit changes to use dpdk debug rx/tx macro to control it.
Signed-off-by: Long Wu <long.wu@corigine.com>
Reviewed-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Nfp cpp log print is not available before. Add support for cpp
print log and set its initial priority to "NOTICE".
Signed-off-by: Long Wu <long.wu@corigine.com>
Reviewed-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Removed freeing of mbuf in scattered Rx as it should not be freed in rx.
Fixes: 965b3127d4 ("net/axgbe: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Bhagyada Modali <bhagyada.modali@amd.com>
Acked-by: Chandubabu Namburu <chandu@amd.com>
Updated the logic to remove the extra increments of the variables.
Fixes: 965b3127d4 ("net/axgbe: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Bhagyada Modali <bhagyada.modali@amd.com>
Acked-by: Chandubabu Namburu <chandu@amd.com>
Updated pkt_len and data_len in the last segment of the packet.
Fixes: 965b3127d4 ("net/axgbe: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Bhagyada Modali <bhagyada.modali@amd.com>
Acked-by: Chandubabu Namburu <chandu@amd.com>
Error check needs to be done only for last segment of Jumbo packet.
Freed first_seg and reset eop to 0 in error case
Fixes: 965b3127d4 ("net/axgbe: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Bhagyada Modali <bhagyada.modali@amd.com>
Acked-by: Chandubabu Namburu <chandu@amd.com>
Remove deprecated fdir_conf from device configuration.
Assume that mode is equal to RTE_FDIR_MODE_NONE.
Add internal Flow Director configuration copy in ixgbe and txgbe device
private data since flow API supports requires it. Initialize mode to
the first flow rule mode on the rule validation or creation.
Since Flow Director configuration data types are still used by some
drivers internally, move it from public API to ethdev driver internal
API.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Dongdong Liu <liudongdong3@huawei.com>
Flow Director configuration is deprecated in generic ethdev device
configuration and will be removed. However, it is essential for
the driver flow API support and cannot be removed completely without
loss of flow API support. Prepare to move the configuration into
device private data.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Flow Director configuration is deprecated in generic ethdev device
configuration and will be removed. However, it is essential for
the driver flow API support and cannot be removed completely without
loss of flow API support. Prepare to move the configuration into
device private data.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
During initialization of the NFP driver, a file name for loading
application firmware is composed using the NIC's AMDA information and
port type (count and speed). E.g.: "nic_AMDA0145-1012_2x10.nffw".
In practice there may be many variants for each NIC type, and many of
the variants relate to assembly components which do not concern the
driver and application firmware implementation. Yet the current scheme
leads to a different application firmware file name for each variant,
because they have different AMDA information.
To reduce proliferation of content-duplicated application firmware
images or symlinks, the NIC's management firmware will only expose
differences between variants that need different application firmware
via a newly introduced hwinfo, "nffw.partno".
Use of the existing hwinfo, "assembly.partno", is maintained in order to
support for NICs with management firmware that does not expose
"nffw.partno".
Fixes: 646ea79ce4 ("net/nfp: move PF functions into its own file")
Cc: stable@dpdk.org
Signed-off-by: Peng Zhang <peng.zhang@corigine.com>
Reviewed-by: Chaoyong He <chaoyong.he@corigine.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund@corigine.com>
A intr_handle is being allocated as a hack to get a (proxy) eventfd from
the Linux interrupt implementation.
But this handle is never freed.
Remove this convoluted hack and create an eventfd in Linux case.
Fixes: d61138d4f0 ("drivers: remove direct access to interrupt handle")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
When link status polling mode is used, the slave link status is
queried twice, which may be inconsistent. To fix this, we can keep
the latest queried link state.
Fixes: a45b288ef2 ("bond: support link status polling")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
In bond_ethdev_rx_burst() function, we check the validity of the
'active_slave' as this code:
if (++active_slave == slave_count)
active_slave = 0;
However, the value of 'active_slave' maybe equal to 'slave_count',
when a slave is down. This is wrong and it can cause buffer overflow.
This patch fixes the issue by using '>=' instead of '=='.
Fixes: e1110e9776 ("net/bonding: fix Rx slave fairness")
Cc: stable@dpdk.org
Signed-off-by: Lei Ji <jilei8@huawei.com>
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
Introduce a new command and remove the last part of specific port init
from testpmd.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Move related specific testpmd commands into this driver directory.
The bypass init is left in testpmd at this point and can be moved later.
While at it, fix checkpatch warnings.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
For diagnostic, it may be useful to provide the PCI vendor and device
id.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Make rte_driver opaque for non internal users.
This will make extending this object possible without breaking the ABI.
Introduce a new driver header and move rte_driver definition.
Update drivers and library to use the internal header.
Some applications may have been dereferencing rte_driver objects, mark
this object's accessors as stable.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Make rte_bus opaque for non internal users.
This will make extending this object possible without breaking the ABI.
Introduce a new driver header and move rte_bus definition and helpers.
Update drivers and library to use the internal header.
Some applications may have been dereferencing rte_bus objects, mark
this object's accessors as stable.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
