Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Rather than hard-coding the example app to be built only when a set of
conditions are met, we can simplify things by having the app built when
KNI library itself is available. That saves us duplicating the same set
of restrictions on both library and example app.
Fixes: 89f0711f9d ("examples: build some samples with meson")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some Makefiles are using CONFIG_RTE_EXEC_ENV and others
are using CONFIG_RTE_EXEC_ENV_LINUXAPP.
Use the latter one for consistency.
We could remove CONFIG_RTE_EXEC_ENV later if considered useless.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
The basic operations for ports enumeration should not be
considered as experimental in DPDK 18.05.
The iterator RTE_ETH_FOREACH_DEV was introduced in DPDK 17.05.
It uses the function the rte_eth_find_next_owned_by() to get
only ownerless ports. Its API can be considered stable.
So the flag experimental is removed from rte_eth_find_next_owned_by().
The flag experimental is removed from rte_eth_dev_count_avail()
which is the new name of the old function rte_eth_dev_count().
The flag experimental is set to rte_eth_dev_count_total()
in the .c file for consistency with the declaration in the .h file.
A lot of internal applications are fixed to not allow experimental API.
Fixes: 8728ccf376 ("fix ethdev ports enumeration")
Fixes: d9a42a69fe ("ethdev: deprecate port count function")
Fixes: e70e26861e ("net/mvpp2: fix build")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: David Marchand <david.marchand@6wind.com>
When building with meson, set build to false when building unsupported
example apps on FreeBSD.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application assume a valid port index is in the range [0..count[.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be valid
- old ports being detached (RTE_ETH_DEV_UNUSED) can be valid
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the function rte_eth_dev_is_valid_port.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch adds following:
1. Option to configure the mac address during create. Generate random
address only if the user has not provided any valid address.
2. Inform usespace, if mac address is being changed in linux.
3. Implement default handling of mac address change in the corresponding
ethernet device.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Increase the default RX/TX ring sizes to 1024/1024 to
accommodate for NICs with higher throughput (25G, 40G etc)
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Since the DPDK build now includes both static and shared libraries, we need
a new way to enable building the examples using either method from the one
installation. To do this, we add in a default "shared" target, and a
separate "static" target which links in the DPDK static libraries. In both
cases, the final application name is symlinked to the last-built static or
shared target, with both binaries able to co-exist in the build directory.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Change the example app Makefiles to query if DPDK is installed and
registered using pkg-config. If so, build directly using pkg-config info,
otherwise fall back to using the original build system with RTE_SDK and
RTE_TARGET
This commit changes the makefiles for the basic examples, i.e. those which
do not have multiple subdirectories underneath the main examples dir.
Examples not covered are:
* ethtool
* multi_process
* performance-thread
* quota_watermark
* netmap_compat
* server_node_efd
* vm_power_manager
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Reorder the text in the makefiles, so that the app name and the source
files are listed first. This then will allow them to be shared later in a
combined makefile building with pkg-config and RTE_SDK-based build system.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Add support for having selected example apps built as part of a meson,
ninja build. By default none are built, and those to be built should be
named directly in the -Dexamples='' meson configuration argument.
This is useful for developers working on a feature who want to use a
suitable example, or examples, to test that feature, as they can compile
everything up in one go, and run the example without having to do a ninja
install first.
This commit adds examples which don't consist of multiple apps in
subdirectories to the meson build, so they can be built by default by
passing -Dexamples parameter to meson.
Not included are the following examples:
* ethtool
* multi-process
* netmap_compat
* performance-thread
* quota_watermark
* server_node_efd
* vm_power_manager
To test the apps added here, use the following command, merged to one line,
to add them to your meson build (command to be run inside the build
directory):
meson configure -Dexamples=bbdev_app,bond,cmdline,distributor,\
eventdev_pipeline_sw_pmd, exception_path,helloworld,\
ip_fragmentation,ip_pipeline,ip_reassembly, ipsec-secgw,\
ipv4_multicast,kni,l2fwd-cat,l2fwd-crypto,l2fwd-jobstats,\
l2fwd-keepalive,l2fwd,l3fwd-acl,l3fwd-power,l3fwd-vf,l3fwd,\
link_status_interrupt,load_balancer,packet_ordering,ptpclient,\
qos_meter,qos_sched,rxtx_callbacks,skeleton,tep_termination,\
timer,vhost,vhost_scsi,vmdq,vmdq_dcb
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
All PCI functionality should be hidden from apps via the PCI bus driver,
the EAL and individual device drivers. Therefore remove the inclusion of
rte_pci.h from sample apps.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Since virtual devices, i.e mrvl net pmd, do not touch pci_dev
dereferencing it will cause segmentation fault as by default
it's set to NULL in rte_eth_dev_info_get().
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Since VF can not disable/enable HW CRC strip for non-DPDK PF drivers,
and kernel driver almost default enable that feature, if disable it in
example app's rxmode, VF driver will report the VF launch failure. So
this patch default to enable HW CRC strip to let VF launch successful.
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The rte_eth_dev_count() function will never return a value greater
than RTE_MAX_ETHPORTS, so that checking is useless.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
In kni_free_kni: Value returned from a function is not checked for errors
before being used
Coverity issue: 30692
Fixes: b475eb0bc4 ("examples/kni: new parameters")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When it's possible, use the new helper to create the mbuf pools.
Most of the patch is trivial, except for the following files that
have some specifics (indirect mbufs):
- ip_fragmentation
- ip_pipeline
- ipv4_multicast
- vhost
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
*alloc() routines return void * and therefore cast is not needed.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
[Thomas: reverse num and size parameters in vhost calloc]
CACHE_LINE_SIZE is a macro defined in machine/param.h in FreeBSD and
conflicts with DPDK macro version.
Adding RTE_ prefix to avoid conflicts.
CACHE_LINE_MASK and CACHE_LINE_ROUNDUP are also prefixed.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
[Thomas: updated on HEAD, including PPC]
These references to drivers break the layering isolation between
application and drivers.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The previous implementation of rte_kni_alloc() was allocating memzones with a
name composed of a fixed string and the interface name. When an application was
allocating and deallocating multiple interfaces with different names, memzones
were quickly exhausted, even though memzones from deallocated interfaces were
never used anymore (unless an interface with the same name was re-allocated).
As a result, the application was unable to allocate more KNI interfaces with
different names.
This patch implements the KNI memzone pool in order to prevent memzone
exhaustion when allocating/deallocating KNI interfaces. It adds a new API call,
rte_kni_init(max_kni_ifaces) that shall be called before any call to
rte_kni_alloc() if KNI is used. The memzones are pre-allocated with interface-
independent names so that they can be reused.
Signed-off-by: Marc Sune <marc.sune@bisdn.de>
Acked-by: Helin Zhang <helin.zhang@intel.com>
For apps that were using default rte_eth_rxconf and rte_eth_txconf
structures, these have been removed and now they are obtained by
calling rte_eth_dev_info_get, just before setting up RX/TX queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Since commit a155d43011 ("support link bonding device initialization"),
rte_eal_pci_probe() is called in rte_eal_init().
So it doesn't have to be called by application anymore.
It has been fixed for testpmd in commit 2950a76931,
and this patch remove it from other applications.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The function rte_snprintf serves no useful purpose. It is the
same as snprintf() for all valid inputs. Deprecate it and
replace all uses in current code.
Leave the tests for the deprecated function in place.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The "default" part in configuration filenames is misleading.
Rename this as "native", as this is the RTE_MACHINE that is set in these files.
This should make it clearer for people who build DPDK on a system then run it on
another one.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Now that we've converted all the pmds in dpdk to use the driver registration
macro, rte_pmd_init_all has become empty. As theres no reason to keep it around
anymore, just remove it and fix up all the eample callers.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
A series of minor changes to example applications included in the
Intel DPDK 1.6 release.
* changes to NIC configuration flags, e.g. specifying RSS
* replacing local "DIM" macro with common "RTE_DIM" macro
* minor whitespace changes for alignment.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
