Sometimes git does not print the name of the function being changed
after @@. It happens especially after a goto label which is not indented.
Giving a hint about the languages of files .c, .h and .py
will improve hunk headers of "git diff" rendering.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Rearrange the order of the high level documenation index into
a more logical sequence for a new user.
Also, improve some of the high-level document names.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
This patch adds a notice that the ABI change for ethtool app to
get the NIC firmware version in the 17.02 release.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
In 17.02 five rte_eth_dev_set_vf_*** functions will be removed
from librte_ether, renamed and moved to the ixgbe PMD.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The _rte_eth_dev_call_process function will change to return "int"
and a fourth parameter "void* ret_param" will be added. This change
targets release 17.02.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In igb_uio, iomem is mapped, and both ioport and io mem are recorded
into uio framework (then into sysfs files), which is duplicated with
what Linux has already provided for user space, and makes the code
too complex.
For iomem, DPDK user space code never opens or reads files under
/sys/pci/bus/devices/xxxx:xx:xx.x/uio/uioY/maps/. Instead,
/sys/pci/bus/devices/xxxx:xx:xx.x/resourceY are used to map device
memory.
For ioport, non-x86 platforms cannot read from files under
/sys/pci/bus/devices/xxxx:xx:xx.x/uio/uioY/portio/ directly, because
non-x86 platforms need to map port region for access in user space,
see non-x86 version pci_uio_ioport_map(). x86 platforms can use the
the same way as uio_pci_generic.
This will remove iomem and ioport mapping in igb_uio kernel module,
and adjusts the iomem implementation in both igb_uio and
uio_pci_generic:
- for x86 platform, get ports info from /proc/ioports;
- for non-x86 platform, map and get ports info by pci_uio_ioport_map().
Note: this will affect those applications who are using files under
/sys/pci/bus/devices/xxxx:xx:xx.x/uio/uioY/maps/ and
/sys/pci/bus/devices/xxxx:xx:xx.x/uio/uioY/portio/.
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Add more tested platforms and nics and OSes to the release notes.
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Issue is with the digest appended feature on QAT PMD.
A workaround is also documented.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
The test recently added accesses to lpm->tbl8[ip >> 8] with is much
larger than the size of the table, causing a crash of the test
application.
Fix this typo by replacing tbl8 by tbl24.
Fixes: 231fa88ed5 ("app/test: verify LPM tbl8 recycle")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Wei Dai <wei.dai@intel.com>
The ethdev Rx/Tx remove callback apis doesn't set rte_errno during
failures, instead they just return negative error number, so using
that number in logs instead of rte_errno upon Rx and Tx callback
removal failures.
Fixes: 278f9454 ("pdump: add new library for packet capture")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes the issue of memzone not being freed incase the
rte_mempool_populate_phys fails in the rte_mempool_populate_default
This issue was identified when testing with OVS ~2.6
- configure the system with low memory (e.g. < 500 MB)
- add bridge and dpdk interfaces
- delete brigde
- keep on repeating the above sequence.
Fixes: d1d914ebbc ("mempool: allocate in several memory chunks by default")
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
- Fix to use bitmapped values in NVM configuration for speed capability
advertisement. This issue is specific to 25G NIC since it is capable
of 25G and 10G speeds.
- Update feature list.
Fixes: 64c239b7f8 ("net/qede: fix advertising link speed capability")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
The links never coming up when bring up x552 NIC, device id is 15ac.
This is caused by delete some code which casing
removes X550em SFP iXFI setup for the drivers in function
ixgbe_setup_mac_link_sfp_x550em().
Fix method is recover the deleted code.
Fixes: 1726b9cd9c ("net/ixgbe/base: remove X550em SFP iXFI setup")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
83xx NIC subsystem differs in new PCI subsystem_device_id and
NICVF_CAP_DISABLE_APAD capability.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Based on the packet type(IPv4 or IPv6), the nicvf HW aligns
L3 data to the 64bit memory address.
The alignment creates a hole in mbuf(between the
end of headroom and packet data start).
The new revision of the HW provides an option to disable
the L3 alignment feature and make mbuf layout looks
more like other NICs. For better application compatibility,
disabling l3 alignment feature on the hardware revisions it supports.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
The l3fwd application route lookup mode can be selected at run time
but not at compile time. This patch corrects the statement in the doc.
Fixes: d0dff9ba ("doc: sample application user guide")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The changes for the feature "Tx prepare" should be made in version 17.02.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As some users are still using xen as the hypervisor, I suggest to
continue support for xen in DPDK. And from 16.11, I will be the
maintainer of all xen-related files.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
L3fwd-power app needs vector mode to be disabled in order to work
properly. The app used to work previously, because it was using
Rx scalar function, but now it uses vector function.
Vector mode needs to be disabled to make the app works,
which has been documented in release notes.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
multi-process support has been verified on non IA such as ARMv8.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Fixes typos present in the documentation and code comments.
Signed-off-by: Alain Leon <xerebz@gmail.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add comments to describe that not all statistics fields in
struct rte_eth_stats are supported by any type of network
interface card. If any statistics field is not supported,
its value is 0.
Signed-off-by: Wei Dai <wei.dai@intel.com>
After changing pkt[0] to pkt[], the example IP reassembly is not working.
It's weird because this change is fine. There should be no difference
between them.
As a workaround, revert this change.
Fixes: 347a1e037f ("lib: use C99 syntax for zero-size arrays")
Reported-by: Huilong Xu <huilongx.xu@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
We should not drop the slow packets which subtype is
not marker or lacp. Because slow packets have other subtype
like OAM,OSSP,user defined and so on.
Signed-off-by: Haifeng Lin <haifeng.lin@huawei.com>
Reviewed-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
During device reset/stop, vmxnet3 releases all mbufs in tx and
rx cmd ring. For rx, we should go over all ring descriptors and
free using rte_pktmbuf_free_seg() instead of rte_pktmbuf_free()
as the metadata of the mbuf might not be properly initialized
(initialization after mempool creation is done in the rx routine)
and the mbuf should always be a single-segment one when populated.
For tx, we can use the existing way as mbuf, if any, will be a
valid one stashed in the eop.
Fixes: dfaff37fc4 ("vmxnet3: import new vmxnet3 poll mode driver implementation")
Signed-off-by: Yong Wang <yongwang@vmware.com>
Using GCC_VERSION to check gcc version and decide whether to include
that compiler option.
Fixes: ecc7a5a27f ("net/qede/base: fix 32-bit build")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix to advertise device's link speed capability based on NVM
port configuration instead of returning driver supported speeds.
Fixes: 95e67b4795 ("net/qede: add 100G link speed capability")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Some of the production parts will arrive after the 16.11 release.
Back off support for those devices. We will add these IDs again
at an appropriate time.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Prevent the arithmetic in bnxt_alloc_vnic_attributes from causing
any unintentional havoc because of the usage of a signed variable.
Coverity issue: 137874
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add list of tested and validated NICs too.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Fixes: 75ef62a943 ("net/mlx5: fix link speed capability information")
Fixes: 1884087198 ("net/mlx5: fix support for newer link speeds")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This commit redefines the completion queue element structure as the
original lacks the required fields.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When mbufs are smaller than MRU, multi-segment support must be enabled to
default set when not in promiscuous or allmulticast modes.
Fixes: 9964b965ad ("net/mlx5: re-add Rx scatter support")
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Constraint alignment was not respected in Tx because of a
wrong use of vector instruction.
Fixes: 1d88ba1719 ("net/mlx5: refactor Tx data path")
Signed-off-by: Elad Persiko <eladpe@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When the device was configured with an explicit maximum packet length,
it would fail if the value was greater than MTU configured in CIMC/UCSM
(plus L2 header length). It should have been compared against maximum
allowed by the device.
Fixes: bb34ffb848 ("net/enic: determine max egress packet size and max MTU")
Signed-off-by: John Daley <johndale@cisco.com>
