The user must request isolated mode before device configuration.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Refactor vmxnet3_post_rx_bufs() to call vmxnet3_renew_desc()
to update the newly allocated mbufs. While here, relocate the
relevant comments to vmxnet3_renew_desc().
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In debug mode, all mbuf ol_flags are temporarily enabled while sitting
in the Rx queue to detect otherwise silent data corruption, however
some of them are special (indirect and control) and must be cleared
before returning mbufs to the pool to avoid crashing.
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
CC: stable@dpdk.org
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Internal Rx packet bytes is over counted, CRC size is not excluded,
that cause incorrect Rx bytes or even negative value.
Fixes: 0bcdc44510 ("net/i40e: exclude internal packet's byte count")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Add new command to support enable/disable of dedicated Tx/Rx queue on
each slave of a bond device for LACP control plane traffic.
set bonding lacp dedicated_queues <port_id> [enable|disable]
When enabled this option creates dedicated queues on each slave device
for LACP control plane traffic. This removes the need to filter control
plane packets in the data path.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Add support for hardware flow classification of LACP control plane
traffic to be redirect to a dedicated receive queue on each slave which
is not visible to application. Also enables a dedicate transmit queue
for LACP traffic which allows complete decoupling of control and data
paths.
This only applies to bonding devices running in mode 4
(link-aggregation-802.3ad).
Introduce two new APIs to support enable/disabled of dedicated
queues.
- rte_eth_bond_8023ad_dedicated_queues_enable
- rte_eth_bond_8023ad_dedicated_queues_disable
rte_eth_bond_8023ad_dedicated_queues_enable must be called before
bonding port is configured or started to reserved and configure the
dedicated queues.
When this option is enabled all slaves must support flow filtering
by Ethernet type and support one additional Tx and Rx queue on
each slave.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Use packet types flags in mbuf to provide hint for filtering of LACP
control plane traffic from the data path.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
This patch fixes the maximum number of Tx an Rx queues supported by a
bonding device return by the rte_eth_dev_info_get function.
The bonding device now calculates the maximum number of supported Tx
and Rx queues based on the slaves bound to the bonded device, with the
minimum values of Tx and Rx queues from the device slaves being the
bonded devices maximum, as each slave must be able to support the same
number of Tx and Rx queues.
Fixes: 2efb58cbab ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Uninitialized memory could cause memory corruption, by indicating
completion of the invalid mbuf.
Fixes: 3d3edc265f ("net/ena: make coherent memory allocation NUMA-aware")
Cc: stable@dpdk.org
Signed-off-by: Alexander Matushevsky <matua@amazon.com>
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
After cleanup of the mbuf on Tx path, queue was still pointing to this
mbuf and upon cleanup of the Tx buffers, it was being freed second time.
Moreover, to make sure that upon interrupt all mbufs will be freed,
whole ring is being cleaned up instead of part of it - originally only
range between head and tail was being cleaned up.
Fixes: 1173fca25a ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
VLAN stripping configuration is supported only for DPDK PF
previously. Since kernel PF supports VLAN stripping now, this
patch adds VLAN stripping support for both DPDK PF and kernel
PF.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Convert DP_NOTICE() to DP_ERR() as appropriate in PMD files.
Change DP_NOTICE() macro to make use of boolean flag to log
it as error message or informational message.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Since nb_max is a u16 it can store value up to 65535 only (not 64K),
but this value is not a power-of-2. So limit the ring sizes to 32K.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Log HW errmsg on the stdout and do minimal handling to prevent HW
attentions from being reasserted.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Implement the macro OSAL_DMA_FREE_COHERENT to release DMA memories.
Track all DMA memory allocations using an array of memzone pointers and
use that to free memory resources along with other resource deallocation.
With this change there is no need to alter the base code to additionally
pass an unique string needed for memzone creation.
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The bonded device does not have to be a PCI device. Use the rte_ethdev
functions instead.
Signed-off-by: Wen Chiu <wchiu@brocade.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
If the numa node is unknown, use the value from rte_socket_id() to avoid
an allocation failure.
Signed-off-by: Eric Kinzie <ekinzie@brocade.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Add support for inner/outer L3/L4 TX csum offload for MPLS-in-UDP packets.
The driver checks for PKT_TX_TUNNEL_MPLSINUDP in Tx ol_flags and updates TX
BD elements with appropriate offsets/length of tunnel headers.
The pseudo csum calculation is removed from qede_xmit_prep_pkts() since its
not needed.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Some PMDs need to know the tunnel type in order to handle advance TX
features. This patch adds a new TX offload flag for MPLS-in-UDP packets.
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Fix an error message. Probably a copy/paste error.
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
bnxt_hwrm_port_phy_cfg() was not setting enables appropriately.
This was causing undesired issues with link config.
This patch takes care of that.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not passing proper speed mask causing autoneg to not work
properly on 10GBase-T links. Use supported speeds from phy_qcfg
for auto mask to fix this.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch fixes the get link configuration code.
bnxt_get_hwrm_link_config was using wrong macros and wrongly
deriving link speed based on link status which was causing
incorrect link information to be displayed in few scenarios.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add code to avoid automatic clearing of VF stats on a function
reset or a stat context free.
Add rte_pmd_bnxt_set_vf_persist_stats() PMD specific API.
Fixes: dd46c6bbd5 ("net/bnxt: support get and clear VF specific stats")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Previously, no VNICs were allocated as the default VNIC,
even if they were configured as one. This patch fixes that error.
Fixes: db678d5c2b ("net/bnxt: add HWRM VNIC configure")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We used the default as a work-around for the 4-byte MTU VNICs,
but we filter those out now. So fix the calculation of VNICs
accordingly.
Fixes: ff63ebbb67 ("net/bnxt: determine the Rx status of VF")
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Set the MTU of the device to MAX size possible.
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support for Stratus VF devices.
Other than adding the VF device ID, we also are adding
support for short message format.
The new short firmware message of size 16 bytes points to a location
in host memory that contains the firmware message that the driver
wants the adapter to process. This indirection requires the
firmware to DMA the message into its own memory for processing.
When the firmware receives a Short Command Format, it will DMA the
firmware message from host memory into its internal memory and then
processes the message as it would have if it received the message
directly in the firmware communication channel.
With BCM57454, the number of VFs increase to 1K and so the requirement
for firmware communication channel memory on adapter becomes expensive.
The short firmware message saves the amount of memory required to support
1K VFs on adapter.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This commit addresses a compilation issue against Glibc >= 2.25, which
implements assert() through a nonstandard ({ }) construct. Such constructs
can normally not be used without __extension__ keyword when -pedantic is
enabled, as is the case when compiling mlx4 and mlx5 PMDs in debug mode.
While assert.h checks for the compiler ability to support GNU extensions,
Clang, unlike GCC, does not allow the above syntax when combining
-std=gnu99 with -pedantic.
Work around missing keyword by moving these PMDs to a stricter compliance
standard without GNU extensions but properly checked by Glibc. Doing so is
supported on the DPDK side since includes have been cleaned up.
Even in C11, using types other than _Bool or signed/unsigned int for
bit-fields is an extension. Some GCC versions complain about that when
-pedantic checks are enabled.
The RTE_STD_C11 macro correctly prevented this issue with C99 but not with
C11 as it becomes a no-op. Forcing the extension keyword addresses it.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Tested-by: Yongseok Koh <yskoh@mellanox.com>
In 2 modes (802.3ad and TLB) of the link bonding driver, monitoring of
link status is used to determine the active slaves to use. These
functions are currently using the rte_link_link_get which could block
for up to 9 seconds, depending on the slave device.
In the 802.3ad periodic callback and in the TLB slave callback the
link status of slaves are checked using rte_eth_link_get function.
This patch changes to the no-wait version of the link get function to
avoid the possible issues which could be introduced if this call was
to block for an extended period of time.
Fixes: 46fb436836 ("bond: add mode 4")
Fixes: 7c76a747e6 ("bond: add mode 5")
Cc: stable@dpdk.org
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
In function i40e_vsi_config_tc_queue_mapping(), if 'enabled_tcmap' is 0,
'total_tc' might be 0. Then 'total_tc' might be used in a division
by 0 in "qpnum_per_tc = i40e_align_floor(vsi->nb_qps / total_tc)".
Fix it by changing 'total_tc' from 0 to 1 just as func
i40e_vsi_update_queue_mapping() does.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
In current implementation, when checking VF link state, PF state
is checked too, although the function has a parameter to tell
if PF state checking is needed.
But in some scenario, user may not care about the PF state.
This patch enables the unused parameter to only check the VF
link state.
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Repairs a bug in the stats_reset where the wrong queue was
being passed into Tx reset.
Fixes: 727b3fe292 ("net/ark: integrate PMD")
Cc: stable@dpdk.org
Signed-off-by: John Miller <john.miller@atomicrules.com>
This change allows a user extension to provide unique private
callback data for all ports.
Arkville is a single-function multi-port device. User_data resides
in the singleton Arkville structure. This structure is shared across
all ports.
With this patch, we are providing a unique user pointer for each port
rather than a common pointer across multiple ports.
Signed-off-by: John Miller <john.miller@atomicrules.com>
Use port type to determine the supported speed capabilities.
Fixes: e274f57322 ("ethdev: add speed capabilities")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
When starting a vmxnet3 device, it is always writing the permanent MAC
address, even if a different MAC address was configured. Write from
the device data instead which holds the current one.
Signed-off-by: George Wilkie <gwilkie@brocade.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Make vmxnet3_process_events less noisy by removing logging when there
are no events to process and by making link, device-change and debug
events DEBUG level rather than ERR.
Change these to use PMD_DRV_LOG instead of PMD_INIT_LOG since they
don't happen at device init.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Generate link-state change notifications by listening to interrupts
generated by the device. Make use of the existing
vmxnet3_process_events function that was compiled out, but change it
to call vmxnet3_dev_link_update on a VMXNET3_ECR_LINK event and to not
be so noisy in its log messages.
Enable interrupts on starting the device, using a new helper function,
vmxnet3_enable_intr, based on vmxnet3_disable_intr and validated
against the FreeBSD driver.
Keep track of the number of interrupts registered for to avoid
hardcoding these in vmxnet3_enable/disable_intr and to provision for
any future rxq intr support.
Factor out the guts of vmxnet3_dev_link_update minus the started check
to allow the new function to be called from vmxnet3_dev_start in the
lsc-enabled case to ensure that the link state is correctly set from
the actual state at that point.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Implement xstats_get() to allow a number of driver-specific Tx and Rx
stats to be retrieved.
Signed-off-by: Robert Shearman <rshearma@brocade.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
Most NICs like virtio, igb/ixgbe etc. don't reset counters on
dev_start and arguably this helps in monitoring the counters
across a longer time span with multiple device start/stops.
vmxnet3 behavior is opposite to that and counters are reset by
the host side implementation each time the device is restarted.
Change the driver to save the counters in its private context
before it is reset by writing CMD_ACTIVATE to REG_CMD.
Signed-off-by: Nachiketa Prachanda <nprachan@brocade.com>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
When exiting a DPDK application, the TAP remote was left
with the link down even if it was initially up.
The device flags of the remote netdevice are saved when probing,
and restored when calling the close function.
The remote state is not set down when calling the stop function anymore.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
New command 'ddp del (port) (profile_path)' removes previously
loaded profile and deletes it from the list of the loaded profiles.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds ability to remove already loaded profile
or write profile without registering it
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
