Remove CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC with below
consideration:
1. A default Rx path can always be selected by setting a proper
rx_free_thresh value at runtime, see
ice_check_rx_burst_bulk_alloc_preconditions.
2. Its not a big deal to always reserve more space for desc ring.
"ring_size = (uint16_t)(rxq->nb_rx_desc + ICE_RX_MAX_BURST);"
3. Fixes a potential invalid memory access in ice_reset_rx_queue.
If CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC is turned on while
ice_check_rx_burst_bulk_alloc_preconditions return fail.
Below code will have problem.
for (i = 0; i < ICE_RX_MAX_BURST; ++i)
rxq->sw_ring[rxq->nb_rx_desc + i].mbuf = &rxq->fake_mbuf;
Fixes: 50370662b7 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Clang on Windows doesn't use pthread for now, while MinGW does. Removing
`-pthread` option with MS linker fixes the following warning:
clang: warning: argument unused during compilation: '-pthread'
[-Wunused-command-line-argument]
Option `--no-as-needed` is meaningless for PE output. Disabling it on
Windows fixes the following warning:
LINK : warning LNK4044: unrecognized option '/-no-as-needed'; ignored
Fixes: 98edcbb5a ("eal/windows: introduce Windows support")
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: William Tu <u9012063@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Add Meson configuration to cross-compile for Windows using MinGW-w64.
It may require adjustments in some cases, but at least it provides
the foundation.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: William Tu <u9012063@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
MinGW-w64 linker does not mimic MS linker options, so the build system
must differentiate between linkers on Windows. Use GNU linker options
with GCC and MS linker options with Clang.
MinGW-w64 by default uses MSVCRT stdio, which does not comply to ANSI,
most notably its formatting and string handling functions. MinGW-w64
support for the Universal CRT (UCRT) is ongoing, but the toolchain
provides its own standard-complying implementation of stdio. The latter
is used in the patch to support formatting in DPDK.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: William Tu <u9012063@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
The devices of the family ConnectX may have two letters as suffix.
Such suffix is preceded with a space and the second x is lowercase:
- ConnectX-4 Lx
- ConnectX-5 Ex
- ConnectX-6 Dx
Uppercase of the device family name BlueField is also fixed.
The lists of supported devices are fixed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The problem occurred when workaround that makes soname two digits
applied. With this change for the ABI version "20.0.1" the experimental
library version become ".so.2001".
After workaround removed in ABI version 21.0, the experimental library
version will become ".so.210".
"2001" is bigger value than "201" although it is a previous version of
the library version, this can break the version comparisons.
To fix this, introducing a temporary sub level versioning for the
experimental libraries, so that minor version comparison will continue
to work.
After change experimental libraries will follow below versioning:
DPDK version ABI version soname library name
------------ ----------- ------ ------------
DPDK 19.11 20.0 .so.0.200 .so.0.200
DPDK 20.02 20.0.1 .so.0.200.1 .so.0.200.1
DPDK 20.05 20.0.2 .so.0.200.2 .so.0.200.2
DPDK 20.11 21.0 .so.0.210 .so.0.210
DPDK 21.02 21.1 .so.0.211 .so.0.211
Note: After workaround removed in DPDK 20.11 and soname switch back to
single digit this patch won't work and needs to be updated.
Fixes: f26c2b39b2 ("build: fix soname info for 19.11 compatibility")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
Some config options are overwritten with the same value
as the one inherited from its template parent.
Such duplicates which have no meaningful comments are removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Broadcom Stingray is armv8 CPU having cortex-a72. The implementor ID is
0x41 (arm) and the primary part number is 0xd08 (cortex-a72).
Signed-off-by: Qingmin Liu <qingmin.liu@broadcom.com>
While icc builds without the "werror" setting build successfully, there are
a lot of warnings. To make the output cleaner, and to allow building with
warnings enabled, we can add a list of warning ids to ignore.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add a new driver to support vDPA operations by Mellanox devices.
The first Mellanox devices which support vDPA operations are
ConnectX-6 Dx and Bluefield1 HCA for their PF ports and VF ports.
This driver is depending on rdma-core like the mlx5 PMD, also it is
going to use mlx5 DevX to create HW objects directly by the FW.
Hence, the common/mlx5 library is linked to the mlx5_vdpa driver.
This driver will not be compiled by default due to the above
dependencies.
Register a new log type for this driver.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add makefile and config file options to compile the Pensando ionic PMD.
Add feature and version map file.
Update maintainers file.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add the OCTEON TX2 SDP EP device probe along with the
build infrastructure for Make and meson builds.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
CONFIG_RTE_IXGBE_INC_VECTOR is enabled by default, so remove
it and use architecture specific flags.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The rte_wait_until_equal_xx APIs abstract the functionality of
'polling for a memory location to become equal to a given value'.
Add the RTE_ARM_USE_WFE configuration entry for aarch64, disabled
by default. When it is enabled, the above APIs will call WFE instruction
to save CPU cycles and power.
From a VM, when calling this API on aarch64, it may trap in and out to
release vCPUs whereas cause high exit latency. Since kernel 4.18.20 an
adaptive trapping mechanism is introduced to balance the latency and
workload.
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Using version 0.47.1, meson is unable to find the math library in Travis
for the 32bits job.
Quite surprisingly, this problem is not seen with the 64bits jobs.
Switching to 0.48.0, the problem disappears.
But we should pass 'm' to find_library instead of 'libm' anyway.
Fixes: 98edcbb5ab ("eal/windows: introduce Windows support")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
If the compiler does not recognise the specific CPU when building with the
default "native" machine type, sse4.2 instructions can be missing, causing
a build error. Rather than advising the user to change the machine type,
we can just turn on SSE4.2 directly. This can prevent issues with running
automated tests with older compilers/distros on newer hardware.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The soname for each stable ABI version should be just the ABI version major
number without the minor number. Unfortunately both major and minor were
used causing version 20.1 to be incompatible with 20.0.
This patch fixes the issue by switching from 2-part to 3-part ABI version
numbers so that we can keep 20.0 as soname and using the final digits to
identify the 20.x releases which are ABI compatible. This requires changes
to both make and meson builds to handle the three-digit version and shrink
it to 2-digit for soname.
The final fix needed in this patch is to adjust the library version number
for the ethtool example library, which needs to be upped to 2-digits, as
external libraries using the DPDK build system also use the logic in this
file.
Fixes: cba806e07d ("build: change ABI versioning to global")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Ray Kinsella <mdr@ashroe.eu>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Kevin Laatz <kevin.laatz@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Meson fails to find a pkg-config executable if pkgconfig
isn't set for aarch64. The environment variable `PKG_CONFIG_PATH`
is useless in this case, and meson fails to locate dependencies
that are built in non-standard paths.
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Remove trailing blank lines. They serve no purpose and are just
editor leftovers.
These can cause git to complain about whitespace errors during merges.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
While most windows apps can handle both "\" and "/" as path separators,
"more" is treating the "/" as the start of a command-line flag in this
case, causing errors.
Fixes: cba806e07d ("build: change ABI versioning to global")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add the make and meson based build infrastructure for the eMAG platform
from Ampere Computing corp., which is a 64-bit ARM processor with 32
Armv8 64-bit CPU cores. For more information, refer to:
https://amperecomputing.com/product/
Signed-off-by: Jerry Hao OS <jerryhao@os.amperecomputing.com>
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
To make the list complete and consistent, add cortex-a76 configuration.
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Arm N1 SDP is an infrastructure segment development platform
based on armv8.2-a Neoverse N1 CPU. For more information, refer to:
https://community.arm.com/developer/tools-software/oss-platforms/w/
docs/440/neoverse-n1-sdp
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
As per new ABI policy [1], all of the libraries are now versioned using
one global ABI version. Stable libraries use the MAJOR.MINOR ABI
version for their shared objects, while experimental libraries
use the 0.MAJORMINOR convention for their versioning.
Experimental library versioning is managed globally. Changes in this
patch implement the necessary steps to enable that.
The CONFIG_RTE_MAJOR_ABI option was introduced to permit multiple
DPDK versions installed side by side. The problem is now addressed
through the new ABI policy, and thus can be removed.
[David] For external libraries relying on Makefile, LIBABIVER is
preserved to avoid using DPDK global ABI version.
[1] https://doc.dpdk.org/guides/contributing/abi_policy.html
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In PAC N3000 card, this is a BMC chip which using MAX10 FPGA
to manage the board configuration, like sensors, flash controller,
QSFP, powers. And this is a SPI bus connected between A10 FPGA and
MAX10, we can access the MAX10 registers over this SPI bus.
In BMC, there are about 19 sensors in MAX10 chip, including the FPGA
core temperature, Board temperature, board current, voltage and so on.
We use DTB (Device tree table) to describe it. This DTB file is store
in nor flash partition, which will flashed in Factory when the boards
delivery to customers. And the same time, the customers can easy to
customize the BMC configuration like change the sensors.
Add device tree support by using libfdt library in Linux distribution.
The end-user should pre-install the libfdt and libfdt-devel package
before use DPDK on PAC N3000 Card.
For Centos 7.x: sudo yum install libfdt libfdt-devel
For Ubuntu 18.04: sudo apt install libfdt-dev libfdt1
To eliminate build error, we currently do not compile raw/ifpga
and net/ipn3ke. User should install libfdt and libfdt-devel first,
modify config/common_linux, CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n
to CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y, modify config/common_base,
CONFIG_RTE_LIBRTE_IPN3KE_PMD=n to CONFIG_RTE_LIBRTE_IPN3KE_PMD=y.
Then this function can work.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add IRQ support for ifpga FME global error, port error and unit.
We implemented this feature by vfio interrupt mechanism.
To build this feature, CONFIG_RTE_EAL_VFIO should be enabled.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
This patch adds an option to enable link time optimization. In addition
to LTO option itself (-flto) fat-lto-objects are being used. This is
because during the build pmdinfogen scans the generated ELF objects to
find this_pmd_name* symbol in symbol table. Without fat-lto-objects gcc
produces ELF only with extra symbols for internal use during linking.
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
dpaa and dpaa2 config have evolved to be same. The same binary
can now work across the platforms. So, there is no need to maintain
two different build configs.
The dpaa config shall work for both generation of dpaa platforms.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Add FIB (Forwarding Information Base) library. This library
implements a dataplane structures and algorithms designed for
fast longest prefix match.
Internally it consists of two parts - RIB (control plane ops) and
implementation for the dataplane tasks.
Initial version provides two implementations for both IPv4 and IPv6:
dummy (uses RIB as a dataplane) and DIR24_8 (same as current LPM)
Due to proposed design it allows to extend FIB with new algorithms
in future (for example DXR, poptrie, etc).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Add RIB (Routing Information Base) library. This library
implements an IPv4 routing table optimized for control plane
operations. It implements a control plane struct containing routes
in a tree and provides fast add/del operations for routes.
Also it allows to perform fast subtree traversals
(i.e. retrieve existing subroutes for a given prefix).
This structure will be used as a control plane helper structure
for FIB implementation. Also it might be used standalone in other
different places such as bitmaps for example.
Internal implementation is level compressed binary trie.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
This patch disables the 1588 timer support by default on DPAA2
platform due to the performance impact.
By default it is disabled in config/common_base, so remove the entry
from DPAA2.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The meson build was missing the define to enable pcap port support if
libpcap (development) package was found on the build platform. Rather than
duplicating the checks for libpcap found in the pcap net PMD build file, we
can move the checks to the top-level config directory and reference the
RTE_PCAP_PORT setting elsewhere in the build.
Bugzilla ID: 351
Fixes: 5b9656b157 ("lib: build with meson")
Cc: stable@dpdk.org
Reported-by: Cristian Bidea <cristian.bidea@keysight.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Cristian Bidea <cristian.bidea@keysight.com>
Any file with ABI versioned functions needs different macros for shared and
static builds, so we need to accommodate that. Rather than building
everything twice, we just flag to the build system which libraries need
that handling, by setting use_function_versioning in the meson.build files.
To ensure we don't get silent errors at build time due to this meson flag
being missed, we add an explicit error to the function versioning header
file if a known C macro is not defined. Since "make" builds always only
build one of shared or static libraries, this define can be always set, and
so is added to the global CFLAGS. For meson, the build flag - and therefore
the C define - is set for the three libraries that need the function
versioning: "distributor", "lpm" and "timer".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Andrzej Ostruszka <amo@semihalf.com>
Reviewed-by: Andrzej Ostruszka <amo@semihalf.com>
gcc 4.8.5 used on RHEL 7.6 can identify a Power 9 CPU but cannot generate
Power 9 code when the "-mcpu=native" command line argument is used. Test
whether the compiler can generate Power 9 code and adjust the machine
setting appropriately.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
pfe (packet forwarding engine) is a network
poll mode driver for NXP SoC ls1012a.
This patch introduces the framework of pfe
driver with basic functions of initialisation
and teardown.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
CAAM JR can work on both LE and BE mode.
Latest platforms are in LE mode, so changing the
default mode to LE to make it more convenient for
the latest platforms.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
RTE_EAL_ALLOW_INV_SOCKET_ID had been introduced and documented as used
with xen dom0 support (dropped for some time now).
Closely looking at this, the code was changed later and ensures that the
socket id is in the [0..RTE_MAX_NUMA_NODES] range anyway.
Let's drop this dead code and the build option with it.
Fixes: 94ef296414 ("eal/linux: fix numa node detection")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
While meson always adds -Wall flag to C compiles, the make build adds extra
warning flags that are not present in the meson build. This addresses that
shortcoming by adding additional warning flags to our builds. The one
omission is the -Wcast-align flag, which though present in make gcc builds,
gives a lot of warnings/errors when used with clang.
The removed warning "-Wunused-parameter" is covered by the "-Wextra"
parameter so is unnecessary.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch adds the implementation of the 128-bit atomic compare
exchange API on aarch64. Using 64-bit 'ldxp/stxp' instructions
can perform this operation. Moreover, on the LSE atomic extension
accelerated platforms, it is implemented by 'casp' instructions for
better performance.
Since the '__ARM_FEATURE_ATOMICS' flag only supports GCC-9, this
patch adds a new config flag 'RTE_ARM_FEATURE_ATOMICS' to enable
the 'cas' version on older version compilers.
For octeontx2, we make sure that the lse (and other) extensions are
enabled even if the compiler does not know of the octeontx2 target
cpu.
Since direct x0 register used in the code and cas_op_name() and
rte_atomic128_cmp_exchange() is inline function, based on parent
function load, it may corrupt x0 register aka break aarch64 ABI.
Define CAS operations as rte_noinline functions to avoid an ABI
break [1].
1: https://git.dpdk.org/dpdk/commit/?id=5b40ec6b9662
Suggested-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Tested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
A while ago telemetry was added in 57ae0ec6 and it also added as-needed
to config/meson.build. This seems no more needed these days as due to other
build changes the ordering in buildlogs is:
[...] -lrte_telemetry [...] -Wl,--no-as-needed [...]
Which means telemetry no more benefits from --no-as-needed anyway.
Overlinking problems get triggered by the meson generated pkgconfig which
will have:
[...] -Wl,--no-as-needed <somelibsusedbydpdk>
This will overlink <somelibs> and in addition anything that follows
as it also doesn't wrap back to --as-needed. So if a projects includes
dpdk libs + <other> it will also consider <other> with --no-as-needed.
Ubuntu bug: https://bugs.launchpad.net/ubuntu/+source/dpdk/+bug/1841759
Fixes: 57ae0ec626 ("build: add dependency on telemetry to apps with meson")
Cc: stable@dpdk.org
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch adds the support for PTP driver for
DPAA2 devices.
To enable set
CONFIG_RTE_LIBRTE_IEEE1588=y in
config/defconfig_arm64-dpaa2-linuxapp-gc
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
IEEE1588 driver needs timestamp of packets.
For DPAA2, the timestamp of TX packets is
stored in annotation area of corresponding
TX confirmation packet.
This patch enables timestamp fields in
annotation area and TX confirmation mode if
CONFIG_RTE_LIBRTE_IEEE1588 is set in
config/defconfig_arm64-dpaa2-linuxapp-gc
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Remove compile time option to control Tx coalescing Latency vs
Throughput behavior. Add tx_mode_latency devarg instead, to
dynamically control Tx coalescing behavior.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Remove compile time flags and use dynamic logging for debug prints.
Also remove rarely used debug logs in register access and datapath.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
