Should be not possible to load conflicting DDP profiles. Only DDP
profiles of the same group (not 0) can be loaded together. If DDP
profile group is 0, it is exclusive, i.e. it cannot be loaded with
any other DDP profile. If DDP profile groups are different, these
profiles cannot be loaded together.
Fixes: b319712f53c8 ("net/i40e: extended list of operations for DDP processing")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch fixes shared library compilation due to undefined
reference to an exported variable 'bbdev_logtype'.
Fixes: 4935e1e9f76e ("bbdev: introduce wireless base band device lib")
Fixes: b8cfe2c9aed2 ("bb/turbo_sw: add software turbo driver")
Fixes: 7dc2b1589440 ("bb/null: add null base band device driver")
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Fix dpaa bus returning IOVA as PA even when it is not running on dpaa
platform.
Fixes: 1ee9569576f6 ("config: enable dpaaX drivers for generic ARMv8")
Fixes: d5a4e3a00c4a ("bus/dpaa: set IOVA mode as physical")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Fix the following build error with latest glibc-headers(
Part of aarch64-linux-gnu-gcc-7.3.0 toolchain)
In file included from drivers/bus/fslmc/mc/fsl_mc_sys.h:30:0,
from drivers/bus/fslmc/mc/dpmng.c:7:
/usr/aarch64-linux-gnu/usr/include/libio.h:21:2: error:
#warning "<libio.h> is deprecated; use <stdio.h> instead." [-Werror=cpp]
Fixes: 3af733ba8da8 ("bus/fslmc: introduce MC object functions")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Device can only be started if firmware is loaded, as per Skeleton
rawdev driver semantics. This patch fixes original implementation
which attempted to start the device without loading firmware.
Fixes: 55ca1b0f2151 ("raw/skeleton: add test cases")
Cc: shreyansh.jain@nxp.com
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
priv_tx_uar_remap() is wrongly considering the queue is already configured
and thus present in the queue array of the device.
Fixes: f8b9a3bad467 ("net/mlx5: install a socket to exchange a file descriptor")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
An RSS configuration without a key is valid according to the
rte_eth_rss_conf API definition.
Fixes: 8086cf08b2f0 ("net/mlx5: handle RSS hash configuration in RSS flow")
Cc: stable@dpdk.org
Reported-by: Yuanhan Liu <yliu@fridaylinux.org>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Since rdma-core glue libraries are intrinsically tied to their respective
PMDs and used as internal plug-ins, their presence in the default search
path among other system libraries for the dynamic linker is not necessarily
desired.
This commit enables their installation and subsequent look-up at run time
in RTE_EAL_PMD_PATH if configured to a nonempty string. This path can also
be overridden by environment variables MLX[45]_GLUE_PATH.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When built as separate objects, these libraries do not have unique names.
Since they do not maintain a stable ABI, loading an incompatible library
may result in a crash (e.g. in case multiple versions are installed).
This patch addresses the above by versioning glue libraries, both on the
file system (version suffix) and by comparing a dedicated version field
member in glue structures.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
For consistency since these includes are already pulled by others.
Fixes: 4eba244b78ec ("net/mlx4: move rdma-core calls to separate file")
Fixes: 0e83b8e536c1 ("net/mlx5: move rdma-core calls to separate file")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This code should catch mistakes early if a glue structure member is added
without a corresponding implementation in the library.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The timestamp flag needs to be set in the offload flags
for the received pkt in case of PTP offload.
Fixes: b11cceb83a34 ("net/bnxt: support timesync")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
virtio_dev_free_mbufs was recently modified to free the
virtqueues but failed to check whether the array was
allocated. Added a check to ensure vqs was non-null.
Fixes: bdb32afbb610 ("net/virtio: rationalize queue flushing")
Signed-off-by: David Harton <dharton@cisco.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The eBPF classifier (section "cls_q" in tap_bpf_program.c) is tracing
marked packets in which skb->cb[1] contains an RSS queue number, and
redirects those packets to the matched queue.
It is expected that skb->cb[1] has been previously set with a valid RSS
queue number during an eBPF action (section "l3_l4" in tap_bpf_program.c).
However, for non-RSS flows, skb->cb[1] may contain a random unset value,
which could falsely be interpreted as a valid RSS queue.
To avoid this potential error, tap_bpf_program.c has been updated as
follows:
1. After calculating the RSS queue number, it is added a unique offset in
order to uniquely identify it as a valid RSS queue number.
2. After matching an RSS queue to a packet, skb->cb[1] is set to 0.
Fixes: cdc07e83bb24 ("net/tap: add eBPF program file")
Fixes: aabe70df73a3 ("net/tap: add eBPF bytes code")
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
TAP device is supporting multi segments Tx, however this capability is
not reported when querying the TAP device.
This commit adds this capability report.
Fixes: 818fe14a9891 ("net/tap: use new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Failsafe reported Tx offloads capabilities are the AND result of its
default capabilities and those of its sub-devices.
In the corrupted code failsafe default Tx capabilities were set to 0.
As a result when running testpmd with "--tx-offloads=0x8000" parameter
(request for multi segments offload) - an error was returned:
PMD: net_failsafe:
Some Tx offloads are not supported, requested 0x8000 supported 0x0
To fix this, failsafe default Tx offload capabilities are set to
DEV_TX_OFFLOAD_MULTI_SEGS |
DEV_TX_OFFLOAD_IPV4_CKSUM |
DEV_TX_OFFLOAD_UDP_CKSUM |
DEV_TX_OFFLOAD_TCP_CKSUM,
Fixes: a46f8d584eb8 ("net/failsafe: add fail-safe PMD")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The vdev_netvsc driver does periodic detection of PCI devices matched
to the netvsc existed interfaces.
When it finds a match, the PCI address is written to the pipe of the
associated fail-safe PMD instance and a positive value is returned to
the periodic check which is wrongly considered as error.
Change the check to consider only a negative value as error.
Fixes: e7dc5d7becc5 ("net/vdev_netvsc: implement core functionality")
Signed-off-by: Matan Azrad <matan@mellanox.com>
Fixes: 9e334305178f ("net/qede: fix MTU set and max Rx length")
Fixes: 22d07d939c3c ("net/qede/base: update")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Few adjustments are required to effectively handle VF vport create/delete
sequence. The problem is exposed by recent ethdev TX offload changes
which requires port to be in down state before applying TX offloads.
- Move vport creation from dev_init() to dev_configure()
- Force to stop vport if it was already started due to previous run
(restart case)
- Move link state enable/disable to dev_init() and dev_close()
respectively.
- For MTU change, recreate vport with new MTU value and restore old
config. This is necessary since VF MTU value can be changed only upon
vport creation.
Fixes: ec94dbc57362 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
ENA device supports Rx jumbo frames and such information needs to
be provided in the offloads flags.
Fixes: 7369f88f88c0 ("net/ena: convert to new Rx offloads API")
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
IBV_WQ_FLAGS_SCATTER_FCS is a WQ flag to be used to configure the CRC
strip on a queue upon creation.
Using IBV_RAW_PACKET_CAP_SCATTER_FCS instead to query to capability.
Even though this is RAW_QP capability, it is being used by rdma-core to
indicate for both RAW_QP and WQ.
Fixes: 43e9d9794cde ("net/mlx5: support upstream rdma-core")
Cc: stable@dpdk.org
Reported-by: Alex Rosenbaum <alexr@mellanox.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
A single queue should have the same verbs priority as an RSS one.
Fixes: 8086cf08b2f0 ("net/mlx5: handle RSS hash configuration in RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
priv_flow_stop() may be called several times, in such situation flows are
already removed from the NIC and thus all associated objects are no present
in the flow object (ibv_flow, indirection tables, ....).
Fixes: 8086cf08b2f0 ("net/mlx5: handle RSS hash configuration in RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Resources allocated for drop flow rules are not freed properly. This causes
a memory leak and triggers an assertion failure on a reference counter when
compiled in debug mode.
This issue can be reproduced with testpmd by entering the following
commands:
flow create 0 ingress pattern eth / end actions drop / end
port start all
port stop all
port start all
port stop all
quit
The reason is additional references are taken when re-enabling existing
flow rules, a common occurrence when rehashing configuration.
Fixes: d3a7e09234e4 ("net/mlx4: allocate drop flow resources on demand")
Cc: stable@dpdk.org
Reported-by: Moti Haimovsky <motih@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
There's interrupt conflict when using DPDK and Linux i40e
on different ports of the same Ethernet controller, this
patch fixes it by switching from IntN to Int0 if multiple
drivers are used.
Fixes: be6c228d4da3 ("i40e: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch provides the option to disable writing some global registers
in PMD, in order to avoid affecting other drivers, when multiple drivers
run on the same NIC and control different physical ports. Because there
are few global resources shared among different physical ports.
Fixes: ec246eeb5da1 ("i40e: use default filter input set on init")
Fixes: 98f055707685 ("i40e: configure input fields for RSS or flow director")
Fixes: f05ec7d77e41 ("i40e: initialize flow director flexible payload setting")
Fixes: e536c2e32883 ("net/i40e: fix parsing QinQ packets type")
Fixes: 19b16e2f6442 ("ethdev: add vlan type when setting ether type")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
New testpmd will get CRC strip offload from rx_offload_capa. I40evf
cannot disable CRC strip. And in fact, it is enabled by PF. This
patch solves the issue by adding CRC strip flag into rx_offload_capa
in i40e and i40evf.
Fixes: 8b9bd0efe0b6 ("app/testpmd: disable Rx VLAN offloads by default")
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The version map filename does not comply with the format
used by meson build rules for drivers (i.e. on the upper
level) and needs to be revisited. This patch removes efx
postfix from the driver title in the filename.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The AVX2 code path includes files from the ethdev, hash and kvargs libs.
These are not listed as dependencies in the case where AVX2 is not in
the default instruction set for the build e.g. machine=nehalem. This
leads to compiler errors as the header files needed cannot be found.
Fixes: e940646b20fa ("drivers/net: build Intel NIC PMDs with meson")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Checking if portal has been allocated is now required at the
caller of rte_dpaa_portal_init() API. This patch adds check
in the dpaa eventdev driver.
Fixes: 5d944582d028 ("bus/dpaa: check portal presence in the caller function")
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA2 eventdev is named as event_dpaa2 which conflicts with
event_dpaa when both are compiled in together. So event_dpaa
is required to renamed.
Fixes: 1ee9569576f6 ("config: enable dpaaX drivers for generic ARMv8")
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This commit modifies vdev_probe to continue probing all the devices
regardless of device probing failures.
Cc: stable@dpdk.org
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
The following error is reported when compiling 18.02-rc2 using ICC,
"transfer of control bypasses initialization of".
The patch fixes the issue.
Fixes: 1911c5edc6cd ("net/tap: fix eBPF RSS map key handling")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
This patch ensures that the OPDL files all contain correct SPDX tags.
The following changes were made to achieve this:
* replace license text with SPDX tag
* correct occurences where SPDX tag was not on first line of file
* ensure license years were correct
Fixes: 4236ce9bf5bf ("event/opdl: add OPDL ring infrastructure library")
Fixes: 3c7f3dcfb099 ("event/opdl: add PMD main body and helper function")
Fixes: d548ef513cd7 ("event/opdl: add unit tests")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Liang Ma <liang.j.ma@intel.com>
