ICC complains about variable being used before its value is set.
Since the variable is only assigned in the for loop,
its declaration is moved inside and is initialized.
lib/librte_eventdev/rte_event_timer_adapter.c(708): error #592:
variable "ret" is used before its value is set
RTE_SET_USED(ret);
Fixes: 6750b21bd6 ("eventdev: add default software timer adapter")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This patch removes the decalartion of rte_eventdev_driver from
rte_eventdev.h, as it not used anymore; pci_eventdev_skeleton_pmd
moved to use rte_pci_driver instead of rte_eventdev_driver.
Fixes: 7214438d93 ("eventdev: remove PCI dependency from generic structures")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
If an eventdev PMD does not wish to provide event timer adapter ops
definitions, the library will fall back to a default software
implementation whose entry points are added by this commit.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit adds the logic that is shared by all event timer adapter
drivers; the common code handles instance allocation and some
initialization.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Event devices can be coupled with various components to provide
new event sources by using event adapters. The event timer adapter
is one such adapter; it bridges event devices and timer mechanisms.
This library extends the event-driven programming model by
introducing a new type of event that represents a timer expiration,
and it provides APIs with which adapters can be created or destroyed
and event timers can be armed and canceled.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
rte_event_ring enqueue and dequeue tail updates were hardcoded for a
SC/SP configuration.
Fixes: dc39e2f359 ("eventdev: add ring structure for events")
Cc: stable@dpdk.org
Signed-off-by: Mattias Rönnblom <hofors@lysator.liu.se>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When an event device is stopped, it drains all event queues and ports.
These events may contain pointers, so to prevent memory leaks eventdev now
supports a user-provided flush callback that is called during the queue
drain process. This callback is stored in process memory, so the callback
must be registered by any process that may call rte_event_dev_stop().
This commit also clarifies the behavior of rte_event_dev_stop().
This follows this mailing list discussion:
http://dpdk.org/ml/archives/dev/2018-January/087484.html
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add timestamp to received packets before enqueuing to
event device if the timestamp is not already set. Adding
timestamp in the Rx adapter avoids additional latency due
to the event device.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The default adapter configuration callback is invoked when a Rx
queue is added to the adapter and the adapter detects that a SW
service is needed. The adapter needs to re-configure the device
with an additional port and to do do, it needs to stop the
device and restart it after it is done reconfiguring it. This
patch adds code to check the return code of
rte_event_dev_start() for both when the reconfiguration fails
and when it succeeds and introduces a new error code (-EIO)
for the first case.
Coverity issue: 257000
Fixes: 9c38b704d2 ("eventdev: add eth Rx adapter implementation")
Cc: stable@dpdk.org
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add non-EAL libraries to DPDK build. The compat lib is a special case,
along with the previously-added EAL, but all other libs can be build using
the same set of commands, where the individual meson.build files only need
to specify their dependencies, source files, header files and ABI versions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Add checks during build to ensure that all symbols in the EXPERIMENTAL
version map section have __experimental tags on their definitions, and
enable the warnings needed to announce their use. Also add an
ALLOW_EXPERIMENTAL_APIS define to allow individual libraries and files
to declare the acceptability of experimental api usage
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Move the common part of rte_ring.h into rte_ring_generic.h.
Move the memory barrier part into update_tail().
No functional changes here.
Suggested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Jia He <jia.he@hxt-semitech.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add API to perform self test on the underlying event device driver.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
add new capability flags to express the opdl PMD limitations.
RTE_EVENT_DEV_CAP_NONSEQ_MODE
Event device is capable of operating in none sequential mode. The path
of the event is not necessary to be sequential. Application can change
the path of event at runtime. If the flag is not set, then event each event
will follow a path from queue 0 to queue 1 to queue 2 etc. If the flag is
set, events may be sent to queues in any order. If the flag is not set, the
eventdev will return an error when the application enqueues an event for a
qid which is not the next in the sequence.
RTE_EVENT_DEV_CAP_RUNTIME_PORT_LINK
Event device is capable of configuring the queue/port link at runtime.
If the flag is not set, the eventdev queue/port link is only can be
configured during initialization.
RTE_EVENT_DEV_CAP_MULTIPLE_QUEUE_PORT
Event device is capable of setting up the link between multiple queue
with single port. If the flag is not set, the eventdev can only map a
single queue to each port or map a single queue to many port.
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: Peter Mccarthy <peter.mccarthy@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The octeontx event device doesn't store the queues to port mapping as a
result it cannot return the exact number of queues unlinked from a port
when application wants to unlink all the queues mapped (supplies queues
param as NULL).
Using links_map we can determine the exact queues mapped to a specific
port and unlink them.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Gage Eads <gage.eads@intel.com>
This commit introduces a capability for disabling the "implicit" release
functionality for a port, which prevents the eventdev PMD from issuing
outstanding releases for previously dequeued events when dequeuing a new
batch of events.
If a PMD does not support this capability, the application will receive an
error if it attempts to setup a port with implicit releases disabled.
Otherwise, if the port is configured with implicit releases disabled, the
application must release each dequeued event by invoking
rte_event_enqueue_burst() with RTE_EVENT_OP_RELEASE or
RTE_EVENT_OP_FORWARD.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The return value for rte_event_port_{link, unlink}() is defined as the
"number of {links, unlinks} actually established." However, the eventdev
layer's error checking returns negative error values. This commit aligns
the eventdev code with the API definition by having it set rte_errno and
return 0 if it detects an error.
Fixes: 4f0804bbdf ("eventdev: implement the northbound APIs")
Cc: stable@dpdk.org
Signed-off-by: Gage Eads <gage.eads@intel.com>
Many exported headers rely on definitions found in rte_config.h without
including it, as shown by the following command:
grep -L '^#include <rte_config.h>' -- \
$(grep -Rl \
$(sed -n '/^#define \([^ ]\+\).*$/{s//\1/;H;};${x;s/\n//;s/\n/\\|/g;p;}' \
build/include/rte_config.h) \
-- build/include/)
We cannot assume external applications will include rte_config.h on their
own, neither directly nor through a -include parameter like DPDK does
internally.
This not only causes obvious compilation failures that can be reproduced
with check-includes.sh such as:
[...]/rte_memory.h:88:43: error: ‘RTE_CACHE_LINE_SIZE’ was not declared in
this scope
#define __rte_cache_aligned __rte_aligned(RTE_CACHE_LINE_SIZE)
^
It also results in less visible issues, for instance rte_hash_crc.h relying
on RTE_ARCH_X86_64's presence to provide dedicated inline functions.
This patch partially reverts the commit below and adds missing include
lines to the remaining files.
Fixes: f1a7a5c5f4 ("remove include of generated config header")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
remove eventdev schedule api and enforce sw driver to use service core
feature for event scheduling.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
In case of sw event device the scheduling can be done on a service core
using the service registered at the time of probe.
This patch adds a helper function to get the service id that can be used
by the application to assign a lcore for the service to run on.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add schedule type queue attribute so that it can be queried along with
the queue config structure.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
With the current scheme of event queue configuration the cfg schedule
type macros (RTE_EVENT_QUEUE_CFG_*_ONLY) are inconsistent with the
event schedule type (RTE_SCHED_TYPE_*) this requires unnecessary
conversion between the fastpath and slowpath API's while scheduling
events or configuring event queues.
This patch aims to fix such inconsistency by using event schedule
types (RTE_SCHED_TYPE_*) for event queue configuration.
This patch also fixes example/eventdev_pipeline_sw_pmd as it doesn't
convert RTE_EVENT_QUEUE_CFG_*_ONLY to RTE_SCHED_TYPE_* which leads to
improper events being enqueued to the eventdev.
Fixes: adb5d5486c ("examples/eventdev_pipeline_sw_pmd: add sample app")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Add rte_event_eth_rx_adapter_service_id_get to map file. Also order
function names alphabetically.
Fixes: 9c38b704d2 ("eventdev: add eth Rx adapter implementation")
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
When event Rx adapter uses software based packet transfer, event op is
always RTE_EVENT_OP_NEW.
By using rte_event_enqueue_new_burst API the underlying event devices
driver can use it as a hint to optimize enqueue operation if possible.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
The adapter implementation uses eventdev PMDs to configure the packet
transfer if HW support is available and if not, it uses an EAL service
function that reads packets from ethernet Rx queues and injects these
as events into the event device.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add RTE_EVENT_TYPE_ETH_RX_ADAPTER event type. Certain platforms (e.g.,
octeontx), in the event dequeue function, need to identify events
injected from ethernet hardware into eventdev so that DPDK mbuf can be
populated from the HW descriptor.
Events injected from ethernet hardware would use an event type of
RTE_EVENT_TYPE_ETHDEV and events injected from the rx adapter service
function would use an event type of RTE_EVENT_TYPE_ETH_RX_ADAPTER to
help the event dequeue function differentiate between these two event
sources.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add common APIs for configuring packet transfer from ethernet Rx
queues to event devices across HW & SW packet transfer mechanisms.
A detailed description of the adapter is contained in the header's
comments.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The PMD callbacks are used by the rte_event_eth_rx_xxx() APIs to
configure and control the ethernet receive adapter if packet transfers
from the ethdev to eventdev is implemented in hardware.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The caps API allows application to retrieve capability information
needed to configure the ethernet Rx adapter for the eventdev and
ethdev pair.
For e.g., the ethdev, eventdev pairing maybe such that all of the
ethdev Rx queues can only be connected to a single event queue, in
this case the application is required to pass in -1 as the queue id
when adding a receive queue to the adapter.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit adds the new_event_threshold port attribute, so the entire port
configuration structure passed to rte_event_queue_setup can be queried.
Signed-off-by: Gage Eads <gage.eads@intel.com>
This commit adds three new queue attributes, so that the entire queue
configuration structure passed to rte_event_queue_setup can be queried.
Signed-off-by: Gage Eads <gage.eads@intel.com>
This commit bumps the library version to refect the ABI change
caused by removing the individual rte_event_port_count, queue_count,
and other get functions. These functions are superseded by the
get-attribute style API, which allows fetching values without API/ABI
changes.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit adds an attribute to the eventdev, allowing applications
to retrieve if the eventdev is running or stopped. Note that no API
or ABI changes were required in adding the statistic, and code changes
are minimal.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit adds a generic queue attribute function. It also removes
the previous rte_event_queue_priority() and priority() functions, and
updates the map files and unit tests to use the new attr functions.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit adds a device attribute function, allowing flexible
fetching of device attributes, like port count or queue count.
The unit tests and .map file are updated to the new function.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit reworks the port functions to retrieve information
about the port, like the enq or deq depths. Note that "port count"
is a device attribute, and is added in a later patch for dev attributes.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
