The patch does not provide any functional change for ARMv7.
I/O barriers are mapped to existing smp barriers.
CC: Jan Viktorin <viktorin@rehivetech.com>
CC: Jianbo Liu <jianbo.liu@linaro.org>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Separate the smp barrier definition for arm and arm64 for fine
control on smp barrier definition for each architecture.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The patch does not provide any functional change for ppc_64.
I/O barriers are mapped to existing smp barriers.
CC: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The patch does not provide any functional change for tile.
I/O barriers are mapped to existing smp barriers.
CC: Zhigang Lu <zlu@ezchip.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The patch does not provide any functional change for IA.
I/O barriers are mapped to existing smp barriers.
CC: Bruce Richardson <bruce.richardson@intel.com>
CC: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit introduce rte_io_mb(), rte_io_wmb() and rte_io_rmb(), in
order to enable memory barriers between I/O device and CPU.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch optimizes rte_memcpy for well aligned cases, where both
dst and src addr are aligned to maximum MOV width. It introduces a
dedicated function called rte_memcpy_aligned to handle the aligned
cases with simplified instruction stream. The existing rte_memcpy
is renamed as rte_memcpy_generic. The selection between them 2 is
done at the entry of rte_memcpy.
The existing rte_memcpy is for generic cases, it handles unaligned
copies and make store aligned, it even makes load aligned for micro
architectures like Ivy Bridge. However alignment handling comes at
a price: It adds extra load/store instructions, which can cause
complications sometime.
DPDK Vhost memcpy with Mergeable Rx Buffer feature as an example:
The copy is aligned, and remote, and there is header write along
which is also remote. In this case the memcpy instruction stream
should be simplified, to reduce extra load/store, therefore reduce
the probability of load/store buffer full caused pipeline stall, to
let the actual memcpy instructions be issued and let H/W prefetcher
goes to work as early as possible.
This patch is tested on Ivy Bridge, Haswell and Skylake, it provides
up to 20% gain for Virtio Vhost PVP traffic, with packet size ranging
from 64 to 1500 bytes.
The test can also be conducted without NIC, by setting loopback
traffic between Virtio and Vhost. For example, modify the macro
TXONLY_DEF_PACKET_LEN to the requested packet size in testpmd.h,
rebuild and start testpmd in both host and guest, then "start" on
one side and "start tx_first 32" on the other.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Instead of passing domain, bus, devid, func, just pass
an rte_pci_addr.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Attaching and detaching ethernet ports from an application
is not the same thing as physically removing a PCI device,
so clarify the flags indicating support. All PCI devices
are assumed to be physically removable, so no flag is
necessary in the PCI layer.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
If resources were mapped prior to probe, unmap them
if probe fails.
This does not handle the case where the kernel driver was
forcibly unbound prior to probe.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Add common vector type definitions to all CPU architectures.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Rename tools/ into usertools/ to differentiate from buildtools/
and devtools/ while making clear these scripts are part of
DPDK runtime.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
This makes struct rte_eth_dev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The info in rte_device about driver is immutable and
shouldn't change.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Both register/unregister and enable/disable don't necessarily require the
rte_intr_handle to be modifiable. Therefore lets constify it.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
This macro is based on Jan Viktorin's original patch but also checks the
type of the passed pointer against the type of the member.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
[jblunck@infradead.org: add type checking and __extension__]
Signed-off-by: Jan Blunck <jblunck@infradead.org>
No device driver sets the unbind flag in current public code base.
Therefore it is good time to remove the unused dead code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Some platform like octeontx may use pci and
vdev based combined device to represent a logical
dpdk functional device.In such case, postponing the
vdev initialization after pci device
initialization will provide the better view of
the pci device resources in the system in
vdev's probe function, and it allows better
functional subsystem registration in vdev probe
function.
As a bonus, This patch fixes a bond device
initialization use case.
example command to reproduce the issue:
./testpmd -c 0x2 --vdev 'eth_bond0,mode=0,
slave=0000:02:00.0,slave=0000:03:00.0' --
--port-topology=chained
root cause:
In existing case(vdev initialization and then pci
initialization), creates three Ethernet ports with
following port ids
0 - Bond device
1 - PCI device 0
2 - PCI devive 1
Since testpmd, calls the configure/start on all the ports on
start up,it will translate to following illegal setup sequence
1)bond device configure/start
1.1) pci device0 stop/configure/start
1.2) pci device1 stop/configure/start
2)pci device 0 configure(illegal setup case,
as device in start state)
The fix changes the initialization sequence and
allow initialization in following valid setup order
1) pcie device 0 configure/start
2) pcie device 1 configure/start
3) bond device 2 configure/start
3.1) pcie device 0/stop/configure/start
3.2) pcie device 1/stop/configure/start
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch uses pthread_getaffinity_np() to narrow down used
cores when none of below options is specified:
* coremask (-c)
* corelist (-l)
* and coremap (--lcores)
The purpose of this patch is to leave out these core related options
when DPDK applications are deployed under container env, so that
users do not need decide the core related parameters when developing
applications. Instead, when applications are deployed in containers,
use cpu-set to constrain which cores can be used inside this container
instance. And DPDK application inside containers just rely on this
auto detect mechanism to start polling threads.
Note: previously, some users are using isolated CPUs, which could
be excluded by default. Please add commands like taskset to use
those cores.
Test example:
$ taskset 0xc0000 ./examples/helloworld/build/helloworld -m 1024
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
It's been a source of confusion in the past, and even with this update
may continue to be a source of confusion. However, the original
language seems to imply that the DPDK EAL will take ownership of the
array passed in. Loosening the language up a bit might give a better
understanding for what is actually happening.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Add a new macro RTE_PMD_REGISTER_KMOD_DEP() that allows a driver to
declare the list of kernel modules required to run properly.
Today, most PCI drivers require uio/vfio.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The lsb_release script is part of an optional package which is not
always installed. On the other hand, /etc/lsb-release is always present
even on minimal Ubuntu installations.
root@ubuntu1604:~# dpkg -S /etc/lsb-release
base-files: /etc/lsb-release
Read the file if present and use the variables defined in it.
Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
There was an option CONFIG_RTE_INSECURE_FUNCTION_WARNING (disabled by
default), which prevents from using some libc functions:
sprintf, snprintf, vsnprintf, strcpy, strncpy, strcat, strncat, sscanf,
strtok, strsep and strlen.
It's all about using them at the right place with the right precautions.
However, it is neither really possible nor a good advice to disable them.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
In function pci_mknod_uio_dev() in lib/librte_eal/eal/eal_pci_uio.c,
The return value of mknod() is ret, not f got by fopen().
So the value of ret should be checked for mknod().
Fixes: f7f97c16048e ("pci: add option --create-uio-dev to run without hotplug")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Today, all logs whose level is lower than INFO are dropped at
compile-time. This prevents from enabling debug logs at runtime using
--log-level=8.
The rationale was to remove debug logs from the data path at
compile-time, avoiding a test at run-time.
This patch changes the behavior of RTE_LOG() to avoid the compile-time
optimization, and introduces the RTE_LOG_DP() macro that has the same
behavior than the previous RTE_LOG(), for the rare cases where debug
logs are in the data path.
So it is now possible to enable debug logs at run-time by just
specifying --log-level=8. Some drivers still have special compile-time
options to enable more debug log. Maintainers may consider to
remove/reduce them.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The rte_eal_pci_probe_one function could return false positive result if
no driver is found for the device.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: David Marchand <david.marchand@6wind.com>
If the user asks to probe multiple times, the probe
callback should only be called on devices that don't have
a driver already loaded.
This is useful if a driver is registered after the
execution of a program has started and the list of devices
needs to be re-scanned.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Close the file descriptor after finish using it.
Fixes: 9ae15538 ("eal/ppc: cpu flag checks for IBM Power")
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
Close the file descriptor after finish using it.
Fixes: b94e5c94 ("eal/arm: add CPU flags for ARMv7")
Fixes: 97523f82 ("eal/arm: add CPU flags for ARMv8")
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
This adds infrastructure for drivers to allow being requested by an alias
so that a renamed driver can still get loaded by its legacy name.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
compile error:
CC [M] .../lib/librte_eal/linuxapp/kni/igb_main.o
.../lib/librte_eal/linuxapp/kni/igb_main.c:2317:21:
error: initialization from incompatible pointer type
[-Werror=incompatible-pointer-types]
.ndo_set_vf_vlan = igb_ndo_set_vf_vlan,
^~~~~~~~~~~~~~~~~~~
Linux kernel 4.9 updates API for ndo_set_vf_vlan:
Linux: 79aab093a0b5 ("net: Update API for VF vlan protocol 802.1ad support")
Use new API for Linux kernels >= 4.9
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
compile error:
CC [M] .../lib/librte_eal/linuxapp/kni/kni_misc.o
cc1: warnings being treated as errors
.../lib/librte_eal/linuxapp/kni/kni_misc.c: In function ‘kni_exit_net’:
.../lib/librte_eal/linuxapp/kni/kni_misc.c:113:18:
error: unused variable ‘knet’
For kernel versions < v3.1 mutex_destroy() is a macro and does nothing,
this cause an unused variable warning for knet which used in the
mutex_destroy()
mutex_destroy() converted into static inline function with commit:
Linux: 4582c0a4866e ("mutex: Make mutex_destroy() an inline function")
To fix the warning unused attribute added to the knet variable.
Fixes: 93a298b34e1b ("kni: support core id parameter in single threaded mode")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
All macros related to driver registeration renamed from DRIVER_*
to RTE_PMD_*
This includes:
DRIVER_REGISTER_PCI -> RTE_PMD_REGISTER_PCI
DRIVER_REGISTER_PCI_TABLE -> RTE_PMD_REGISTER_PCI_TABLE
DRIVER_REGISTER_VDEV -> RTE_PMD_REGISTER_VDEV
DRIVER_REGISTER_PARAM_STRING -> RTE_PMD_REGISTER_PARAM_STRING
DRIVER_EXPORT_* -> RTE_PMD_EXPORT_*
Fix PMDINFOGEN tool to look for matches of RTE_PMD_REGISTER_*.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Since switched to kernel dynamic debugging it is possible to remove
compile time debug log configuration.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Switch to dynamic logging functions. Depending kernel configuration this
may cause previously visible logs disappear.
How to enable dynamic logging:
https://www.kernel.org/doc/Documentation/dynamic-debug-howto.txt
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
