Function strerror(errno) has built strings only for non-negative errno values.
for negative values of errno it describe error as "Unknown error -errno"
to be more descriptive i put string "channel not found" taken from header.
The negative argument will be interpreted as a very large unsigned value.
Coverity issue: 13266
Coverity issue: 13269
Fixes: 445c6528b55f ("power: common interface for guest and host")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Fix issue reported by Coverity.
Coverity ID 124556
If the buffer is treated as a null terminated string in later operations,
a buffer overflow or over-read may occur.
In vhost_set_ifname: The string buffer may not have a null terminator if
the source string's length is equal to the buffer size
Fixes: 54292e9520e0 ("vhost: support ifname for vhost-user")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The header file rte_debug.h makes use of the "unlikely" macro which
means it should include the rte_branch_prediction.h header file.
Fixes: 50705e8e3cdd ("eal: add assert macro for debug")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The macro RTE_VERIFY always checks a condition.
It is optimized with "unlikely" hint.
While this macro is well suited for test applications, it is preferred
in libraries and examples to enable such check in debug mode.
That's why the macro RTE_ASSERT is introduced to call RTE_VERIFY only
if built with debug logs enabled.
A lot of assert macros were duplicated and enabled with a specific flag.
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
The ENA_ASSERT is kept (in debug mode only) because it has more
parameters to log.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The default was to compile every logs (including debug) and set
the default level to debug.
As some debug logs may hurt performance, a notice is added and the
default level is now info.
In order to enable debug logs, they must be compiled with
RTE_LOG_LEVEL=RTE_LOG_DEBUG and enabled at runtime with --log-level=8.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some relevant EAL logs are raised from debug to info level in order to
show the available number of cores and the detected devices.
The driver ids and name are logged only if the device is not blacklisted.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
While parsing token string there may be several modes:
- fixed single string
- multi-choice single string
- any single string
This patch add one more mode - any multi string.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Fix issue reported by clang scan-build
Value of pointer tbl_next was uninitialized. When function lookup_step()
take else branch it may provide garbage into tbl = tbl_next;
Fixes: 5c510e13a9cb ("lpm: add IPv6 support")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Back then when we fixed the missing free lpm I was to quickly to say yes
if it applies not only to the lpm6 but also to all of the lpm code.
It turned out to not apply to all of them. In rte_lpm_create_v20 there
is an unexpected fused allocation:
mem_size = sizeof(*lpm) + (sizeof(lpm->rules_tbl[0]) * max_rules);
[...]
lpm = (struct rte_lpm_v20 *)rte_zmalloc_socket(mem_name,mem_size,
RTE_CACHE_LINE_SIZE, socket_id);
That causes lpm->rules_tbl not to have an own struct malloc_elem that
can be derived via RTE_PTR_SUB(data, MALLOC_ELEM_HEADER_LEN) in
malloc_elem_from_data.
Due to that the rte_lpm_free_v20 accidentially misderives the elem and
assumes it is ELEM_FREE triggering in malloc_elem_free
if (!malloc_elem_cookies_ok(elem) || elem->state !=
return -1;
While it seems counter-intuitive the way to properly remove rules_tbl in
the old fused allocation style of rte_lpm_free_v20 is to not remove it.
The newer rte_lpm_free_v1604 is safe because in rte_lpm_create_v1604
rules_tbl is a separate allocation.
Fixes: d4c18f0a1d5d ("lpm: fix missing free")
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
If any fragment hole is found in ipv4_frag_reassemble() and
ipv6_frag_reassemble(), whole ip_frag_pkt mbufs are moved to death-row.
Any mbufs already chained to another mbuf are freed multiple times as
there are still in ip_frag_pkt array.
Signed-off-by: Chaeyong Chong <cychong@gmail.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Although previous implementation returned an error when trying to release
a memzone assigned to an ivshmem device, it stills freed it.
Fixes: cd10c42eb5bc ("mem: fix ivshmem freeing")
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
rx_q fifo may have chained mbufs, merge them into single skb before
handing to the network stack.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Currently every time a KNI interface goes up, its ethernet address
is reassigned.
After this patch ethernet address is assigned only once,
at initialization time.
Suggested-by: Sergey Balabanov <balabanovsv@ecotelecom.ru>
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Fix issue reported by Coverity.
Coverity ID 13194
The function returns a value that indicates an error condition. If this
is not checked, the error condition may not be handled correctly.
Fixes: 2f4adfad0a69 ("vfio: add multiprocess support")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The function rte_memcpy_func() is used in ARM and PPC implementations
of rte_memcpy().
There are some useless copies in Tile and some ARM branches.
It was also declared without doxygen comment in the generic header.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
After having removed the deprecated stuff, we can start pushing
new fixes and features in the version 16.07.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Some flags were poisoned after having been removed from EAL and mbuf
in releases 1.8 (b10eef348d, 62814bc2e9) and 2.0 (4769bc5a27cc).
After several releases, they have probably disappeared from all
applications going to upgrade to DPDK 16.07.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
The function rte_hash_lookup_multi() was renamed rte_hash_lookup_bulk()
in DPDK 1.4 and was kept as an undocumented alias.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some statistics were deprecated since release 2.1 (49f386542af4).
The last deprecated counter to be used was imcasts.
The VF loopback statistics are also removed as they are used only
in igb and duplicated in extended statistics.
The new counters should be added to extended statistics.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The driver i40e was using a specific PCI config before the release 16.04.
Since 16.04, it is always enabled in i40e (commit 56465cfaf).
The API has been deprecated in the commit 68f77593823cab.
The igb_uio implementation has been deprecated in commit b7cf8e155.
The config helper - through igb_uio sysfs entries - is now removed.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Support of PCAP file has been added to rte_port in release 16.04
as NEXT_ABI. It is in the standard ABI of the release 16.07.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Fix vhost-kni compile errors because of Linux kernel API changes
- SOCK_ASYNC_WAITDATA renamed to SOCKWQ_ASYNC_WAITDATA
Linux commit id: 9cd3e072
Updated in Linux kernel 4.4
- sk_alloc() gets new parameter
Linux commit id: 11aa9c28b
Updated in Linux kernel 4.2
New parameter is: "@kern: is this to be a kernel socket?"
Reported-by: Chintu Hetam <rometoroam@gmail.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fixes the buffer overflow that occurs due to following;
1. When the input packet burst does not meet the conditions: (a) being
contiguous (first n bits set in pkts_mask, all the other bits cleared)
and (b) containing a full burst, i.e. at least tx_burst_sz packets
(n >= tx_burst_size). This is the slow(er) code path taken when local
variable expr != 0.
2. There are some packets already in the buffer.
3. The number of packets in the incoming burst (i.e. popcount(pkts_mask))
plus the number of packets already in the buffer exceeds the buffer size
(RTE_PORT_IN_BURST_SIZE_MAX, i.e. 64).
Fixes: bf6931b242f7 ("port: ring")
Fixes: 5f4cd47309d6 ("port: add ring writer nodrop")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Coverity ID 13289: Resource leak:
The system resource will not be reclaimed and reused,
reducing the future availability of the resource.
In pci_vfio_get_group_fd: Leak of memory or pointers to system resources
Fixes: ff0b67d1c868 ("vfio: DMA mapping")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
netif_rx() should be used in interrupt context. Replace it with
netif_rx_ni() which is safe to use in process context.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch aligns the logic used to check for the presence of
adjacent segments in has_adjacent_segments() with the logic used
in cleanup_segments() when actually deciding to concatenate or
not a pair of segments. Additionally, adjacent segments are
no longer considered overlapping to avoid generating errors for
segments that can happily coexist together.
This fixes an infinite loop that happened when segments where
adjacent in their physical or virtual addresses but not in their
ioremap addresses: has_adjacent_segments() reported the presence
of adjacent segments while cleanup_segments() was not considering
them for concatenation, resulting in an infinite loop since the
result of has_adjacent_segments() is used in the decision to
continue looping in cleanup_segments().
Signed-off-by: David Verbeiren <david.verbeiren@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
It fix coverity issue:
CID 124557 (#1 of 1): Unchecked return value (CHECKED_RETURN)
check_return: Calling rte_eth_tx_buffer_set_err_callback without
checking return value (as is done elsewhere 6 out of 7 times).
Fixes: d6c99e62c852 ("ethdev: add buffered Tx")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
The cryptodev API was introduced in the DPDK 2.2 release.
Since then it has
- been reviewed and iterated for the DPDK 16.04 release
- had extensive use by the l2fwd-crypto app,
the ipsec-secgw example app,
the test app.
We believe it is now stable and the EXPERIMENTAL label should be removed.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
renamed rte_cryptodev_sym_session.type -> dev_type
(as it's not a session type, but a device type)
renamed rte_crypto_sym_op.type -> sess_type
(as it's not an op type, but a session type)
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
To avoid a race condition while creating a new hash object, the
list has to be locked before the lookup, and released only once the
new object is added in the list.
As the lock is held by the rte_ring_create(), move its creation at the
beginning of the function and only take the lock after the ring is
created to avoid a deadlock.
Fixes: 48a3991196 ("hash: replace with cuckoo hash implementation")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Change rte_hash*_create() functions to return NULL and set rte_errno to
EEXIST when the object name already exists. This is the behavior
described in the API documentation in the header file.
These functions were returning a pointer to the existing object in that
case, but it is a problem as the caller did not know if the object had
to be freed or not.
Doing this change also makes the hash API more consistent with the other
APIs (mempool, rings, ...).
Fixes: 916e4f4f4e ("memory: fix for multi process support")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Change rte_lpm*_create() functions to return NULL and set rte_errno to
EEXIST when the object name already exists. This is the behavior
described in the API documentation in the header file.
These functions were returning a pointer to the existing object in that
case, but it is a problem as the caller did not know if the object had
to be freed or not.
Doing this change also makes the lpm API more consistent with the other
APIs (mempool, rings, ...).
Fixes: 916e4f4f4e ("memory: fix for multi process support")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This change is to make user code simpler. For PMDs which do not fill any
packet types, return 0 instead of -ENOTSUP as suggested by Bruce.
Usually, users only care if the required (by ptype_mask) ptypes can be
filled by the specified PMD. If the PMD implements dev_supported_ptypes_get
func is not important. And the introduce of another return value (-ENOTSUP)
would increase the complexity of user programs to check it.
Besides, there are ways to know if a PMD implements the func:
a. see doc/guides/nics/overview.rst.
b. use (~1) as parameter ptype_mask, then check if return 0.
Fixes: 78a38edf66de ("ethdev: query supported packet types")
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Coverity reports an issue in ethdev:
*** CID 124562: Null pointer dereferences (FORWARD_NULL)
/lib/librte_ether/rte_ethdev.c: 1518 in rte_eth_xstats_get()
1512
1513 /* global stats */
1514 for (i = 0; i < RTE_NB_STATS; i++) {
1515 stats_ptr = RTE_PTR_ADD(ð_stats,
1516
rte_stats_strings[i].offset);
1517 val = *stats_ptr;
>>> CID 124562: Null pointer dereferences (FORWARD_NULL)
>>> Dereferencing null pointer "xstats".
1518 snprintf(xstats[count].name,
sizeof(xstats[count].name),
1519 "%s", rte_stats_strings[i].name);
1520 xstats[count++].value = val;
1521 }
1522
1523 /* per-rxq stats */
If a user calls rte_eth_xstats_get(portid, NULL, n) with n != 0,
it may result in a crash. Although the API documentation says that
n is the size of the table and xstats can be NULL if n == 0, we
can add an additional check here to make Coverity happy.
In that case, the return value is the same than when n == 0 is
passed, it returns the number of statistics.
Fixes: ce757f5c9a ("ethdev: new method to retrieve extended statistics")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch clean-up the code in librte_port.
The clean-up includes the following:
* Clearer error message display.
* Remove unnecessary RTE_NEXT_ABI macro warping.
* Remove __rte_unused attribute
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch fixes sink port parameter checking logic.
Originally, if user set field "file_name" with meaning value
but leave PCAP support feature disabled, the program simply
ignores this field without notifying the user.
Fixes: eb5f4119b2bc ("port: add pcap file dump")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch fixes source port parameter checking logic.
Originally, if user set field "file_name" with meaning value
but leave PCAP support feature disabled, the program simply
ignores this field without notifying the user.
Fixes: d4b42133d85b ("port: add pcap file source")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The link speed configuration is now done with bitmaps so 100G speed
requires only a new bit flag.
The actual link speed is a number so its size must be increased from
16-bit to 32-bit.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tested-by: Matej Vido <vido@cesnet.cz>
This patch redesigns the API to set the link speed/s configuration
of an ethernet port. Specifically:
- it allows to define a set of advertised speeds for
auto-negociation.
- it allows to disable link auto-negociation (single fixed speed).
- default: auto-negociate all supported speeds.
A flag autoneg in struct rte_eth_link indicates if link speed was a
result of auto-negociation or was fixed by configuration.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The speed capabilities of a device can be retrieved with
rte_eth_dev_info_get().
The new field speed_capa is initialized in the drivers without
taking care of device characteristics in this patch.
When the capabilities of a driver are accurate, the table in
overview.rst must be filled.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
The speed numbers ETH_LINK_SPEED_ are renamed ETH_SPEED_NUM_.
The prefix ETH_LINK_SPEED_ is kept for AUTONEG and will be used
for bit flags in next patch.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
