Vhost lib has already provided a helper for used ring logging, driver
could use it to reduce code.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch series enables a new method for live migration, i.e. software
assisted live migration. This patch provides a device argument for user
to choose the methold.
When "sw-live-migration=1", driver/device will do live migration with a
relay thread dealing with dirty page logging. Without this parameter,
device will do dirty page logging and there's no relay thread consuming
CPU resource.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
If user wants the VF to be used in VDPA (vhost data path acceleration)
mode, then the user can add a "vdpa=1" parameter for the device.
So if driver does not find this option, it should quit and let the bus
continue the probe.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
If driver fails to register ifc VF device into vhost lib, then this
device should not be stored.
Fixes: a3f8150eac ("net/ifcvf: add ifcvf vDPA driver")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Driver probe may fail for different causes, debug message is helpful for
debugging issue.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
VDPA driver can decide if it needs to enable/disable the host notifier
mapping, so exposing a API can allow flexibility. A later patch will
base on this.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Until we have support for control virtqueues let's disable it and
fail device initalization if specified as a parameter.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add option to enable packed queue support for virtio-user
devices.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Use packed virtqueue format when reading and writing descriptors
to/from the ring.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This implements the transmit path for devices with
support for packed virtqueues.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add support to dump packed virtqueue data to the
VIRTQUEUE_DUMP() macro.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
It is possible that the VF device exists but DPDK doesn't know
about it. This could happen if device was blacklisted or more
likely the necessary device (Mellanox) was not part of the DPDK
configuration.
In either case, the right thing to do is just keep working
but only with the slower para-virtual device.
Fixes: dc7680e859 ("net/netvsc: support integrated VF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
On device close or startup errors, the transmit descriptor pool
was being left behind.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
While calculating the input packet count per port, discarded packets
should be reduced, right now only PF VSI discarded packets are reduced.
But while calculating the input byte count per port, Rx byte count is
used, which should take all discarded packets into account, including
VF VSI ones.
This will cause inconsistency in stat counters in some cases.
This patch would take all VSI stats as packet and byte count to address
the issue.
Fixes: 763de290cb ("net/i40e: fix packet count for PF")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The reset flags vf->vf_reset and vf->pend_msg are set when VF received
VIRTCHNL_EVENT_RESET_IMPENDING. So after resetting done, these flags
should be cleared.
Fixes: 8cacf78469 ("net/i40e: fix VF initialization error")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
NDIS multi-queue support is only in WS2012 or later. Check the NDIS
version to limit to single queue on older versions. Similar code
exists in Linux driver.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Make DPDK enable SRIOV flag in same way as Linux and FreeBSD.
Fixes: dc7680e859 ("net/netvsc: support integrated VF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Before this patch, there are two functions will call
i40e_dev_free_queues to free queues. For rte_eth_dev_close(), its
redundant because of duplication. For rte_eth_dev_reset() its
redundant because of not necessary, since following dev_configure
is required after dev_reset and it will be updated correctly.
This patch removes redundant code in i40e_dev_free_queues().
Fixes: 6b45371283 ("i40e: free queue memory when closing")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This reverts
commit 09a62d7569 ("net/i40e: fix offload not supported mask")
Contrary to what is said in above patch commit log,
I40E_TX_OFFLOAD_NOTSUP_MASK is the mask of Tx offload bits that are part
of PKT_TX_OFFLOAD_MASK but not included in I40E_TX_OFFLOAD_MASK.
Above patch erroneously includes all PKT_RX_OFFLOAD_ bits in the
I40E_TX_OFFLOAD_NOTSUP_MASK, this is not what is expected.
Restore the initial xor that gives the expected result.
Fixes: 09a62d7569 ("net/i40e: fix offload not supported mask")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When a guest is spanned on multiple NUMA nodes and
multiple Virtio devices are spanned onto these nodes,
we expect that their ring memory is allocated in the
right memory node.
Otherwise, vCPUs from node A may be polling Virtio rings
allocated on node B, which would increase QPI bandwidth
and impact performance.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Since below commit, several tx_prep functions are broken, they fail to
pass supported Tx offload features check:
PKT_TX_IPVx must be set when any PKT_TX_L4 checksum is requested,
but these values are not present in the mask of supported Tx offloads
of several drivers that advertise PKT_TX_L4_MASK.
So any packet sent to those drivers with a L4 checksum request and
one of PKT_TX_IPVx bit set is rejected by the tx prepare function.
Fixes: 1037ed842c ("mbuf: fix Tx offload mask")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch introduces changes for supporting multiprocess support.
This is trivial for VFs but comes with some limitations for the PF.
Due to restrictions when using NFP CPP interface, just one secondary
process is supported by now for the PF.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The VIC hardware has 64 MAC filters per vNIC, which can be either
unicast or multicast. Use one half for unicast and the other half for
multicast, as the VIC kernel drivers for Linux and Windows do.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Cisco VIC adapters run firmware. Add the fw_version_get handler to
help diagnostics.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so rte_eth_dev_close() can
later free port resources including mac_addrs.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
When multiple Chelsio adapters are present, the current naming
convention of using underlying physical port number of the adapter
creates conflicts when allocating control queue mbuf pool for
multiple adapters and hence results in allocation failure. Fix by
using port_id from rte_eth_dev_data, instead of physical port number.
Fixes: 3a3aaabc7c ("net/cxgbe: add control queue to communicate filter requests")
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Function mlx5_ctrl_flow_vlan() is used to set the rss rule in
MLX5 PMD, using priv->reta_idx_n as number of Rx queues.
This number is passed to mlx5_flow_validate_action_rss(), which
attempts to access the Rx queues at priv->rxqs.
In case priv->rxqs_n is 0, priv->rxqs is empty, and
mlx5_flow_validate_action_rss() will crash with segmentation fault.
priv->reta_idx_n can never be 0, even if priv->rxqs_n is set to 0.
But when priv->rxqs_n is set to 0, setting the rss rule is invalid.
This patch updates mlx5_ctrl_flow_vlan(), if priv->rxqs_n is 0 the
function will fail with EINVAL errno.
Fixes: 8086cf08b2 ("net/mlx5: handle RSS hash configuration in RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Port reset will call i40evf_uninit_vf() to release resource. It wants
to call i40evf_dev_close() to release resources. Before this patch,
hw->adapter_stopped was used to mark the status about start/stop and
close. So it will never call i40evf_dev_close() after stopping the port.
This patch added hw->adapter_closed flag in i40evf_dev_close() and
i40e_dev_close() to control the status of close.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When starting the device, the RSS table is initialized. So the RSS
update before device_start would be overwritten. This patch allows users
to update the RSS reta table before device_start.
Fixes: db5b65301d ("ethdev: allow to set RSS hash computation flags and/or key")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When starting the device, the RSS table is initialized. So the RSS
update before dev_start would be overwritten. This patch allows users
to update the RSS reta table before dev_start and adjusts the order
to set entries sequentially.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Device can't function properly with a firmware that is in recovery
mode.
Check the firmware status at initialization time. If the firmware is
in recovery mode, alert the user to check it.
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
RSS hash configure get API (i40e_dev_rss_hash_conf_get()) didn't check
the return value of i40e_get_rss_key().
i40e_dev_rss_hash_conf_get() will return success even getting RSS hash
key failed. This patch fixes the issue.
Fixes: d0a349409b ("i40e: support AQ based RSS config")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The struct should be ifcvf_net_config other than ifcvf_net_device_config
The variable is used as named opaque variable, struct fields are not
accessed at all, so using wrong struct type has no effect but it should
be fixed.
Fixes: a3f8150eac ("net/ifcvf: add ifcvf vDPA driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
tso and vlan parameters were removed from the signature
of txq_mbuf_to_swp function.
The documentation of the function was not updated accordingly.
Remove the tso and vlan documentation to match the function signature.
Fixes: 8f6d9e13a9 ("net/mlx5: remove redundant checks")
Cc: stable@dpdk.org
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If vdev_netvsc is run with debug logging enabled, then the
log output will fill with:
net_vdev_netvsc: interface lo is non-ethernet device
Remove the message since it is not useful.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Matan Azrad <matan@mellanox.com>
Reduced number of INFO logs in BNX2X PMD by converting some INFO
logs to DEBUG and few NOTICE logs to INFO, removing extra new lines,
printing banner bar once for the adapter and device specific info.
Fixes: ba7eeb035a ("net/bnx2x: fix logging to include device name")
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The imissed counters (number of packets dropped because the queues were
full) were actually reported through xstats as "rx_out_of_buffer"
but was not reported through stats.
Following a recent discussion on the ML, as there is no way to tell the
user if a counter is implemented or not, this should be considered a
bug. For example, user looking at imissed will think the packets are
lost before reaching the device.
Signed-off-by: Tom Barbette <barbette@kth.se>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
ixgbe is able to recognize 1G SX and LX id, but it is missing the LHA.
Add it, so that it can handle LHA SFP plugin.
Fixes: d2e72774e5 ("ixgbe/base: support X550")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Take the 'other interrupt' into account when setting up
MSI-X interrupts and use the proper mask when enabling it.
Also, rearm the MSI-X vector after the LSC interrupt fires.
This change allows both LSC and RXQ interrupts to work at
the same time when using MSI-X interrupts.
Cc: stable@dpdk.org
Signed-off-by: Timmons C. Player <timmons.player@spirent.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
In case of running with not enough capabilities, i.e. running as
non-root user any application linked with DPDK prints the message
about IOPL call failure even if it was just called like
'./testpmd --help'. For example, this breaks most of the OVS unit
tests if it built with DPDK support.
Let's register the virtio driver unconditionally and print error
message while probing the device. Silent iopl() call left in the
constructor to have privileges as early as possible as it was before.
Fixes: 565b85dcd9 ("eal: set iopl only when needed")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The VLAN push action on E-Switch supports only 802.1Q (0x8100)
and 802.1AD (0x88A8) Tag Protocol ID (TPID) insertions. The
parameter check for RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN action
is added.
Fixes: 57123c00c1 ("net/mlx5: add Linux TC flower driver for E-Switch flow")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
