This patch checks that rx queue and tx queue of each
link specified in ip pipeline configuration file are
used.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch allows parser to read promisc entry from
the LINK section defined in configuration file. It
is an optional parameter: if present, value should
be read (yes/no, on/off), else the value is the
default value (i.e. 1 = promiscuous mode on)
Example of config file:
[LINK0]
promisc = no; optional parameter, default value is “yes”
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Fixes the wrong source port mempool assignment (commit id eb32fe7c).
The source port is now assigned by parsed mempool id index value either by
default or configured by CFG file.
Previously, the mempool id for locating source port's mempool pointer was
the port id. When multiple source ports exist in the same pipeline, and
the default mempool configuration is used (one MEMPOOL0 is shared between
all source ports), the invalid mempool pointer (NULL) will be assigned to
source ports other than first source port.
Fixes: eb32fe7c5574 ("examples/ip_pipeline: rework initialization parameters")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Fixes the mbuf allocation not initialized problem. This problem will cause
the mbufs not be able to freed back to mempool by rte_pktmbuf_free().
Fixes: ef3403fb6f9a ("port: source and sink")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
call rte_eth_copy_pci_info() after the RTE_PCI_DRV_INTR_LSC
has been initialised.
Fixes: eeefe73f0af1 ("drivers: copy PCI device info to ethdev data")
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
The space check for transmit ring only needs a single conditional.
I.e only need to recheck for space if there was no space in first check.
This can help performance and simplifies loop.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The virtio driver was not initializing all the fields in
the receive mbuf. This would cause bugs where previous usage
of mbuf would leave stale TCI and offload flags.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The original was always setting unicast. While here, clean up some
other references that also point into the Ethernet header.
Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Harish Patil <harish.patil@qlogic.com>
The upcoming Hyper-V driver converts the pci_drv element
in struct eth_driver to a union. When vmbus is added the
pci_drv needs to be explicit. Easier to fix the issue
ahead of time.
This is backwards compatible with previous code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
When dev_stop is called in i40evf pmd driver, queues are switched off
to stop receiving and transmitting. But the mac address of this VF
still exists in VEB switch.
To stop the traffic from VSI level, the mac address need to be removed
too. Then the bandwidth for this SRIOV VSI can be freed.
This patch fix this issue.
Fixes: 4861cde46116 ("i40e: new poll mode driver")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
This patch fixes tx byte statistics when transmitting packets
with link down.
Previously, the counter would decrement 4 bytes for each packet that
was transmitted with link down, causing the uint64 to wrap around.
Fixes: c03fcee9abbd ("ixgbe: remove CRC size from byte counters")
Reported-by: Michael Qiu <michael.qiu@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Give user a chance to customize the hash key compare function.
The default rte_hash_cmp_eq function is set in the rte_hash_create
function, but these builtin ones may not good enough, so the user
may call this to override the default one.
Signed-off-by: Yu Nemo Wenbin <yuwb_bjy@ctbri.com.cn>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
rte_hash_create function was accidentally duplicated in
DPDK_2.1 in rte_hash_version.map.
Fixes: 473d1beb ("hash: allow to store data in hash table")
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
RTE_PMD_DEBUG_TRACE was changed also to support pedantic flag,
but not completely.
the macro changed only under the RTE_LIBRTE_ETHDEV_DEBUG define,
but when RTE_LIBRTE_ETHDEV_DEBUG is not defined the old format
was left.
fix the macro to support pedantic flag in any case.
Fixes: b974e4a40cb5 ("ethdev: make error checking macros public")
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Co-maintain helloworld, l2fwd and dpdk-qat sample apps.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Similar to commit 113c8e13c4201eee207723571f83aaf285277d75, but
for bnx2x, pcap, sze2data and xenvirt PMDs.
Requiring applications to know about library internal details like
dependencies to external helper libraries is a limitation of
static linkage, shared libraries should always know their own
dependencies for sane operation. This is especially highlighted
with dlopen()'ed items, having applications link against about plugin
internal dependencies goes on the side of absurd.
Note that linking with a shared combined library still requires to
know the internal dependencies.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some DPDK libraries have a dependency.
The Mellanox drivers embed this declaration in shared library case.
So the application do not need to know the dependency when linking.
But it cannot work with static libraries or the combined one.
Note that Mellanox drivers are currently not supported in a shared
combined library case.
Most of the DPDK libraries declare their dependencies to be linked
with the application in every cases, even when using drivers as
shared library plugins.
This patch improves the condition used for Mellanox drivers, so that
it can be applied to other drivers without breaking the shared
combined library case.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The "make install" is more standard now.
So the recipe can be simplified.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
In order to be installed system-wise, this application needs
a prefix. So it makes clear that it is DPDK related.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The examples are part of the installed documentation.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The HTML API and HTML/PDF guides may be installed if generated.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
sbin/dpdk_nic_bind is a symbolic link to tools/dpdk_nic_bind.py
where some python objects may be generated.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Add kernel modules to "make install".
Nothing is done if there is no kernel module compiled.
When using "make install T=", the default path is the same as before.
The Linux path is based on host kernel version.
Suggested-by: Mario Carrillo <mario.alfredo.c.arevalo@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Provides new sub-rules to install runtime and sdk separately.
The build directory must be changed from BUILD_DIR to O in install
rules to avoid a bad recursive effect (O being BUILD_DIR being O + T).
Suggested-by: Mario Carrillo <mario.alfredo.c.arevalo@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The old install command was:
make install T=x86_64-native-linuxapp-gcc DESTDIR=install
It still works and can be replaced by these more standard commands:
make config T=x86_64-native-linuxapp-gcc 0=x86_64-native-linuxapp-gcc
make O=x86_64-native-linuxapp-gcc
make install O=x86_64-native-linuxapp-gcc prefix= DESTDIR=install
It means the "make install" do not perform any compilation anymore when T
is not used. It is done only in pre_install to keep compatibility with the
old syntax based on T= option.
The default prefix /usr/local is empty in the T= case which is
used only for a local install.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The rule "install" follows these conventions:
http://gnu.org/prep/standards/html_node/Directory-Variables.htmlhttp://gnu.org/prep/standards/html_node/DESTDIR.html
The variable sdkdir has been added to the more standards ones,
to configure the directory used with RTE_SDK when using the DPDK makefiles
to build an application.
It is still possible to build DPDK with the "install T=" rule without
specifying any DESTDIR. In such case there is no install, as before.
The old usage of an installed SDK is:
make -C examples/helloworld RTE_SDK=$(readlink -m $DESTDIR) \
RTE_TARGET=x86_64-native-linuxapp-gcc
RTE_TARGET can be specified but is useless now with an installed SDK.
The RTE_SDK directory must now point to a different path depending of
the installation.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The real installation was called "binary install" and was done
after the build when DESTDIR was specified.
Remove this limitation and move the code in install rule only.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The multi-target install create some subdirectories with the target name
which is not standard for a "make install" procedure.
The uninstall procedure cannot be applied properly (without removing
all files in a directory). It would need to pre-compute paths.
As it is a packaging issue, it is removed from the build system capabilities.
The variable BUILD_DIR is also renamed to RTE_OUTPUT used in other files.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
It is not possible to test every configs on an unique machine.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Fixes following error (observed when versioning macros used):
LD libdpdk.so
/usr/bin/ld: /root/dpdk/build/lib/libdpdk.so: version node not found
for symbol <function>@DPDK_x.y
Also resulting combined library contains symbol version information:
$ readelf -a build/lib/libdpdk.so | grep rte_eal_ | grep @ | head
<...> GLOBAL DEFAULT 12 rte_eal_alarm_set@@DPDK_2.0
<...> GLOBAL DEFAULT 12 rte_eal_pci_write_config@@DPDK_2.1
<...> GLOBAL DEFAULT 12 rte_eal_remote_launch@@DPDK_2.0
...
Versioning fixed by merging all version scripts into one automatically and
feeding it to final library.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds -s as an alias to --status in dpdk_nic_bind.py,
providing a convenient shorthand.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Irrelevant of the target, the preprocessor #ifdef SSE2 for the
grinder_pipe_exists function is inadequate since the __mm_testz_si128
function requires SSE4.1, PTEST instruction described in
https://en.wikipedia.org/wiki/SSE4#SSE4.1 (I do no have better spec
reference). I have bumped the preprocessor #ifdef to require SSE4.
The Atom N2600 does not have SSE4, http://ark.intel.com/products/58916,
and so I had trouble building rte_sched with optimized version of
grinder_pipe_exists, with following:
error: inlining failed in call to always_inline _mm_testz_si128’:
target specific option mismatch
GCC 4.9 correctly identifies my target as not having SSE4, and with
provided patch builds the non-optimized version of grinder_pipe_exists.
Signed-off-by: Mike Sowka <msowka@gmail.com>
As it causes issues when building with RTE_MACHINE=default due to SSE4.x
requirements and in other discussions was so far rated "lightly tested and
doesn't provide really significant performance improvement" let us disable
that in the default config.
(=> http://dpdk.org/ml/archives/dev/2015-November/029067.html)
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The function rte_mempool_obj_iter used in mlx drivers
was not exported. So the driver loading was failing:
EAL: open shared lib librte_pmd_mlx4.so
EAL: x86_64-native-linuxapp-gcc/lib/librte_pmd_mlx4.so:
undefined symbol: rte_mempool_obj_iter
Fixes: 9d41beed24b0 ("lib: provide initial versioning")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There is a new function in the EAL API for internal use.
It has neither a proper prefix nor a .map export:
libethdev.so: undefined reference to `is_xen_dom0_supported'
Fixes: 719dbebceb81 ("xen: allow determining DOM0 at runtime")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Building RTE_LIBRTE_PMD_XENVIRT was broken when RTE_BUILD_COMBINE_LIBS was
enabled (http://dpdk.org/ml/archives/dev/2015-November/028660.html).
Now the underlying issue is rather simple, the xen code needs libxenstore.
But rte.app.mk so far only considered that when RTE_BUILD_COMBINE_LIBS was
disabled.
While it is correct to create the DPDK sublib linking only in the
RTE_BUILD_COMBINE_LIBS=n case, the libxenstore should be added to the linked
libs in any case if RTE_LIBRTE_PMD_XENVIRT is enabled.
Reported-by: Thiago Martins <thiagocmartinsc@gmail.com>
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
We have encountered a CPU where the AES-NI instruction set is disabled
due to export restrictions. Since the build machine and target machine
is different, using -native configs doesn't work, and on this CPU, the
application refuses to run due to the AES CPU flags being amiss.
The patch passes EXTRA_CFLAGS to the figure-out-cpu-flags helper,
which allows us to add -mno-aes to the compile flags and resolve this
problem.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The initial problem has been seen while building mlx4 pmd as a shared
library on Ubuntu 14.04 (gcc 4.8.4-2ubuntu1~14.04).
Resulting .so will lack the DT_NEEDED entry for libibverbs:
marchand@ubuntu1404:~/dpdk$ ldd ./build/lib/librte_pmd_mlx4.so
linux-vdso.so.1 => (0x00007fff87ebb000)
libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f2ced21a000)
/lib64/ld-linux-x86-64.so.2 (0x00007f2ced821000)
And trying to load it in testpmd triggers this error:
[...]
EAL: librte_pmd_mlx4.so: undefined symbol: ibv_query_port
[...]
After some strace, the problem comes from the --as-needed option passed to the
linker.
It is safer to specify libraries we depend on after the objects we are linking
into a shared library, especially when the linker is invoked with options like
--as-needed.
Fixes: bef06a8a0655 ("mk: set library dependencies in shared object file")
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Exit tools/setup.sh script without prompting "Press enter to continue".
The script can now be exited by typing the option number, "quit" or "q".
Signed-off-by: John McNamara <john.mcnamara@intel.com>
The validator attempts to disable all kernel modules but since
commit 36080ff96b0eb37a6da8c4fec1a2f8a57dfadf5b fails to do so
for KNI, causing the build stage to fail if kernel headers are missing.
With the introduction of CONFIG_RTE_KNI_KMOD, CONFIG_RTE_LIBRTE_KNI=n
can eventually be dropped but leaving it around for now as its
needed with pre-2.1 versions.
Fixes: 36080ff96b0e ("config: add KNI kmod option")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
