For i40e vector Tx path, if tx_offload is set as FAST_FREE_MBUF mode,
no mbuf fast free operations are executed. To fix this, add mbuf fast
free mode for vector Tx path.
Furthermore, for i40e vector Tx path, if implement FAST_FREE_MBUF mode,
it means per-queue all mbufs come from the same mempool and have
refcnt = 1. Thus we can use bulk free of the buffers when mbuf fast free
mode is enabled.
For vector path in arm platform:
In n1sdp, performance is improved by 18.4%;
In thunderx2, performance is improved by 23%.
For vector path in x86 platform:
No performance changes.
Suggested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
For i40e scalar Tx path, if implement FAST_FREE_MBUF mode, it means
per-queue all mbufs come from the same mempool and have refcnt = 1.
Thus we can use bulk free of the buffers when mbuf fast free mode is
enabled.
Following are the test results with this patch:
MRR L3FWD Test:
two ports & bi-directional flows & one core
RX API: i40e_recv_pkts_bulk_alloc
TX API: i40e_xmit_pkts_simple
ring_descs_size = 1024;
Ring_I40E_TX_MAX_FREE_SZ = 64;
tx_rs_thresh = I40E_DEFAULT_TX_RSBIT_THRESH = 32;
tx_free_thresh = I40E_DEFAULT_TX_FREE_THRESH = 32;
For scalar path in arm platform with default 'tx_rs_thresh':
In n1sdp, performance is improved by 7.9%;
In thunderx2, performance is improved by 7.6%.
For scalar path in x86 platform with default 'tx_rs_thresh':
performance is improved by 4.7%.
Suggested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Currently, there'll be conflict error when running
the following commands:
1. flow create 0 ingress
pattern eth / ipv4 / udp src is 32 / end
actions queue index 2 / end
2. flow destroy 0 rule 0
3. flow create 0 ingress
pattern eth / ipv4 / udp dst is 32 / end
actions queue index 2 / end
This patch fixes the input set conflict issue.
Fixes: 42044b69c6 ("net/i40e: support input set selection for FDIR")
Fixes: 4a072ad434 ("net/i40e: fix flow director config after flow validate")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Lingli Chen <linglix.chen@intel.com>
i40e can support following rss hash function types: default/toeplitz,
symmetric toeplitz, and simple_xor. However, when filter engine parses
pattern action, it only supports symmetric toeplitz & default.
Add simple_xor and toeplitz hash functions support when parsing pattern
action.
Fixes: ef4c16fd91 ("net/i40e: refactor RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The flag use_avx2 and use_avx512 are defined as local variables, they
will not be aware by the secondary process, then wrong data path is
selected. Fix the issue by moving them into struct i40e_adapter.
Fixes: 6ada10deac ("net/i40e: remove devarg use-latest-supported-vec")
Fixes: e6a6a13891 ("net/i40e: add AVX512 vector path")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add common devargs key definition for "bus", "class" and "driver".
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The original code use a heap pointer after it is freed.
Fixes: 460d167958 ("drivers/net: delete HW rings while freeing queues")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When user configured the flow rule with raw packet via command
"flow_director_filter", it would reset all previous fdir input set
flags with "i40e_flow_set_fdir_inset()".
Ignore to configure the flow input set with raw packet rule used.
Fixes: ff04964ea6 ("net/i40e: fix flow director for common pctypes")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The VF reset can be triggered by the PF reset event, then the PCI bus
master will be cleared, the VF will be not allowed to issue any Memory
or I/O Requests.
So after the reset event is detected, always enable the PCI bus master.
And if failed, the device or system may be in an invalid state, so keep
the VF reset state to mark it as I/O error.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The kernel driver supports VF RSS configuration message
"VIRTCHNL_OP_GET_RSS_HENA_CAPS and VIRTCHNL_OP_SET_RSS_HENA",
this patch adds PMD support for these messages.
Fixes: b81295c474 ("net/i40e: add user callback for VF to PF message")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When starting VF, VF will issue reset command to PF, wait a fixed
amount of time, and assume VF reset is done on PF side. However,
compared with kernel PF, DPDK PF needs more time to setup. If we
run DPDK PF to support DPDK VF, the original delay will not be
enough.
When we first start VF after PF is launched, the execution
time of the statement info.msg_buf = rte_zmalloc("msg_buffer",
info.buf_len, 0); in the function i40e_dev_handle_aq_msg is more
than 200ms. It may cause VF start error.
Since iavf can hardly trigger this issue and i40evf will be replaced
by iavf in future DPDK versions, this patch provide a workaround.
We extend VF reset waiting time from 200ms to 500ms so that
VF can start normally when using DPDK PF and DPDK VF in most cases.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When start port, all MAC addresses will be set. We should set the MAC
type of default MAC address as VIRTCHNL_ETHER_ADDR_PRIMARY.
Fixes: 3f604ddf33 ("net/i40e: fix lack of MAC type when set MAC address")
Cc: stable@dpdk.org
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When .get_monitor_addr API was introduced, it was implemented in the
i40e driver, but only for the physical function; the virtual function
portion of the driver does not support that API.
Add the missing function pointer to VF device structure.
The i40e driver is not meant to use the VF portion any more, as
currently i40e VF devices are supposed to be managed by iavf drier, but
add this just in case it needs backporting later.
Fixes: a683abf90a ("net/i40e: implement power management API")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: David Hunt <david.hunt@intel.com>
The VSI pointer is always valid, so there is no need to judge its
validity.
Fixes: b6583ee402 ("i40e: full VMDQ pools support")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds check for negative VEB index when parsing VEB list.
Fixes: 79f2248219 ("net/i40e: add floating VEB option")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fixes a few different things:
* Remove 'fw_version' NULL checks, it is allowed if the 'fw_size' is
zero, 'fw_version' being NULL but 'fw_size' not zero condition checked
in ethdev layer
* Be sure required buffer size is returned if provided one is not big
enough, instead of returning success (0)
* Document in doxygen comment the '-EINVAL' is a valid return type
* Take into account that 'snprintf' can return negative value
* Cast length to 'size_t' to compare it with 'fw_size'
Fixes: bb42aa9ffe ("net/atlantic: configure device start/stop")
Fixes: ff70acdf42 ("net/axgbe: support reading FW version")
Fixes: e2652b0a20 ("net/bnxt: support get FW version")
Fixes: cf0fab1d2c ("net/dpaa: support firmware version get API")
Fixes: 748eccb97c ("net/dpaa2: add support for firmware version get")
Fixes: b883c0644a ("net/e1000: add firmware version get")
Fixes: 293430677e ("net/enic: add handler to return firmware version")
Fixes: 1f5ca0b460 ("net/hns3: support some device operations")
Fixes: bd5b86732b ("net/hns3: modify format for firmware version")
Fixes: ed0dfdd0e9 ("net/i40e: add firmware version get")
Fixes: e31cb9a362 ("net/ice: support FW version getting")
Fixes: 4f09bc55ac ("net/igc: implement device base operations")
Fixes: eec10fb0ce ("net/ionic: support FW version")
Fixes: 8b0b565742 ("net/ixgbe: add firmware version get")
Fixes: 4d9f5b8adc ("net/octeontx2: add FW version get operation")
Fixes: f97b56f9f1 ("net/qede: support FW version query")
Fixes: 83fef46a22 ("net/sfc: add callback to retrieve FW version")
Fixes: bc84ac0fad ("net/txgbe: support getting FW version")
Fixes: 2191347120 ("ethdev: add firmware version get")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Acked-by: Jiawen Wu <jiawenwu@trustnetic.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Running "./devtools/check-meson.py --fix" on the DPDK repo fixes a
number of issues with whitespace and formatting of files:
* indentation of lists
* missing trailing commas on final list element
* multiple list entries per line when list is not all single-line
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Currently, FDIR doesn't work for all common PCTYPEs, the root cause is
that input set is not configured.
Fixes: 4a072ad434 ("net/i40e: fix flow director config after flow validate")
Cc: stable@dpdk.org
Signed-off-by: Murphy Yang <murphyx.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Introduce i40e_simple_prep_pkts() as the preparation function for
simple Tx data path, as it's for sanity check for simple Tx.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The i40evf PMD will be deprecated, iavf will be the only VF driver for
Intel 700 serial (i40e) NIC family.
To reach this, there will be 2 steps:
Step 1: iavf will be the default VF driver, while i40evf still can be
selected by devarg: "driver=i40evf".
This is covered by this patch, which include:
1) add all 700 serial NIC VF device ID into iavf PMD
2) skip probe if devargs contain "driver=i40evf" in iavf
3) continue probe if devargs contain "driver=i40evf" in i40evf
Step 2: i40evf and related devarg are removed, this will happen at DPDK
21.11
Between step 1 and step 2, no new feature will be added into i40evf
except bug fix.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Currently, there is no way for a VF driver to specify that it wants to
change its device/primary unicast MAC address. This makes it
difficult/impossible for the PF driver to track the VF's device/primary
unicast MAC address, which is used for VM/VF reboot and displaying on
the host. Fix this by using 2 bits of a pad byte in the
virtchnl_ether_addr structure so the VF can specify what type of MAC
it's adding/deleting.
Below are the values that should be used by all VF drivers going
forward.
VIRTCHNL_ETHER_ADDR_LEGACY(0):
- The type should only ever be 0 for legacy AVF drivers (i.e.
drivers that don't support the new type bits). The PF drivers
will track VF's device/primary unicast MAC using with best
effort.
VIRTCHNL_ETHER_ADDR_PRIMARY(1):
- This type should only be used when the VF is changing their
device/primary unicast MAC. It should be used for both delete
and add cases related to the device/primary unicast MAC.
VIRTCHNL_ETHER_ADDR_EXTRA(2):
- This type should be used when the VF is adding and/or deleting
MAC addresses that are not the device/primary unicast MAC. For
example, extra unicast addresses and multicast addresses
assuming the PF supports "extra" addresses at all.
If a PF is parsing the type field of the virtchnl_ether_addr, then it
should use the VIRTCHNL_ETHER_ADDR_TYPE_MASK to mask the first two bits
of the type field since 0, 1, and 2 are the only valid values.
For i40evf PMD, when set default MAC address, use type
VIRTCHNL_ETHER_ADDR_PRIMARY as this case is changing device/primary
unicast MAC. For other cases, such as adding or deleting extra unicast
addresses and multicast addresses, use type VIRTCHNL_ETHER_ADDR_EXTRA.
Fixes: 6d13ea8e8e ("net: add rte prefix to ether structures")
Fixes: caccf8b318 ("ethdev: return diagnostic when setting MAC address")
Cc: stable@dpdk.org
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Tested-by: Yan Xia <yanx.xia@intel.com>
Enable additional PHY types (25G-AOC and 25G-ACC) for set PHY config
command.
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Tested-by: Ashish Paul <apaul@juniper.net>
Fix segment fault when failing to get the memory from the pool.
If there's no memory in the default cache, fall back to the
previous process.
The previous AVX2 rearm function is changed to add some AVX512
instructions and changed to a callee of the AVX2 and AVX512
rearm functions.
Fixes: e6a6a13891 ("net/i40e: add AVX512 vector path")
Cc: stable@dpdk.org
Reported-by: David Coyle <david.coyle@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Tested-by: David Coyle <david.coyle@intel.com>
Users of <rte_ip.h> relied on it to provide IP-related defines,
like IPPROTO_* constants, but still had to include POSIX headers
for inet_pton() and other standard IP-related facilities.
Extend <rte_ip.h> so that it is a single header to gain access
to IP-related facilities on any OS. Use it to replace POSIX includes
in components enabled on Windows. Move missing constants from Windows
networking shim to OS shim header and include it where needed.
Remove Windows networking shim that is no longer needed.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
DPDK code often relies on functions and macros that are not standard C,
but are found on all platforms, even if by slightly different names.
Windows <rte_os.h> provided macros or inline definitions for such symbols.
However, when placed in public header, these symbols were unnecessarily
exposed, breaking consumer POSIX compatibility code.
Move most of the shims to <rte_os_shim.h>, a header to be used instead
of <rte_os.h> by internal code. Include it in libraries and PMDs that
previously imported shims from <rte_os.h>. Directly replace shims that
were only used inside EAL:
* index -> strchr, rindex -> strrchr
* sleep -> rte_delay_us_sleep
* strerror_r -> strerror_s
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
The validity verification of input parameters should be performed at
API layer, not in the PMD.
Fixes: 3a18c44b45 ("ethdev: add access to EEPROM")
Fixes: 40ff8b305a ("net/e1000: add module EEPROM callbacks for e1000")
Fixes: f2088e785c ("net/i40e: fix dereference before check when getting EEPROM")
Fixes: b74d0cd43e ("net/ixgbe: add module EEPROM callbacks for ixgbe")
Fixes: 8a6a09f853 ("net/mlx5: support reading module EEPROM data")
Fixes: 58f6f93c34 ("net/octeontx2: add module EEPROM dump")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The configuration of FDIR input set should not be set
during flow validate. It should be set when flow create.
Fixes: fe5d0e85b7 ("net/i40e: fix flow director flex configuration")
Fixes: 15018d79f0 ("net/i40e: add FDIR support for GTP-C and GTP-U")
Cc: stable@dpdk.org
Signed-off-by: Murphy Yang <murphyx.yang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
A new feature requesting additional queues from PF is added in iavf;
before sending VIRTCHNL_OP_REQUEST_QUEUES op code, the offload
capability flag VIRTCHNL_VF_OFFLOAD_REQ_QUEUES will be checked.
And due to DPDK PF is still used by some cases, add this offload
capability flag in i40e PF.
Fixes: cbdbd360f7 ("net/i40e: support AVF basic interface")
Cc: stable@dpdk.org
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
In i40e NEON vector Rx path, the packet descs processing is incorrect.
This caused wrong packet type been filled in mbuf.
To fix this, when shifting the pktlen field to be 16-bit aligned, it
only needs to process the high 16bit of the packet descs instead of
the high 32bit.
Test Results:
Architecture: arm64
NIC: XL710
Driver: i40e
Package: Ether()/IP()/
Without this patch:
desc_to_ptype_v: ptype = 7 (error)
With this patch:
desc_to_ptype_v: ptype = 23 (correct)
Fixes: ae0eb310f2 ("net/i40e: implement vector PMD for ARM")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Kathleen Capella <kathleen.capella@arm.com>
Since rte_flow is the only API for filtering operations,
the legacy driver interface filter_ctrl was too much complicated
for the simple task of getting the struct rte_flow_ops.
The filter type RTE_ETH_FILTER_GENERIC and
the filter operarion RTE_ETH_FILTER_GET are removed.
The new driver callback flow_ops_get replaces filter_ctrl.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The absolute field offsets of IPv4 or IPv6 header are related to
hardware configuration. The X710 and X722 have different hardware
configurations, and users can even modify the hardware configuration.
Therefore, The default values cannot be used when calculating mask
offset.
The following flows can be created on X722 NIC, but the packet will
not enter the queue 3:
flow create 0 ingress pattern eth / ipv4 proto is 255 / end
actions queue index 3 / end
pkt = Ether()/IP(ttl=63, proto=255)/Raw('X'*40)
flow create 0 ingress pattern eth / ipv4 tos is 50 / udp / end
actions queue index 3 / end
pkt = Ether()/IP(tos=50)/UDP()/Raw('X'*40)
flow create 0 ingress pattern eth / ipv6 tc is 12 / udp / end
actions queue index 3 / end
pkt = Ether()/IPv6(tc=12,hlim=34,fl=0x98765)/UDP()/Raw('X'*40)
flow create 0 ingress pattern eth / ipv6 hop is 34 / end actions
queue index 3 / end
pkt = Ether()/IPv6(tc=12,hlim=34,fl=0x98765)/Raw('X'*40)
This patch read the field offsets from the NIC and return the mask
register value.
Fixes: 98f0557076 ("i40e: configure input fields for RSS or flow director")
Fixes: 92cf7f8ec0 ("i40e: allow filtering on more IP header fields")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Tested-by: Lingli Chen <linglix.chen@intel.com>
To support more representor type, this patch introduces representor type
enum. The enum is subject to be extended to support new representor in
patches upcoming.
For each devarg structure, only one type supported.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
IPv4 fragment_offset mask was required to be 0 no matter what the
spec value was. But zero mask means not caring about fragment_offset
field then both non-frag and frag packets should hit the rule.
But the actual fragment rules should be like the following:
Only non-fragment packets can hit Rule 1:
Rule 1: mask=0x3fff, spec=0
Only fragment packets can hit rule 2:
Rule 2: mask=0x3fff, spec=0x8, last=0x2000
This patch allows the above rules.
Fixes: 42044b69c6 ("net/i40e: support input set selection for FDIR")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When Tx queue number is more than Rx queue number, and RSS is
enabled, there'll be packet loss with X722.
The root cause is the lookup table is not configured correctly,
since it uses VF's queue pair number but not Rx queue number.
Fixes: 2da3ba7467 ("net/i40e: fix VF runtime queues RSS config")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Signed-off-by: Hengjian Zhang <hengjianx.zhang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Rename PKT_RX_EIP_CKSUM_BAD to PKT_RX_OUTER_IP_CKSUM_BAD and
deprecate the original name. The new name is better aligned
with existing PKT_RX_OUTER_* flags, which should help reduce
confusion about its use.
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Replace copies of size(arr)/size(arr[0]) with RTE_DIM().
Eventually all of these macro definitions should be removed.
Signed-off-by: Andrew Boyer <aboyer@pensando.io>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adds extra cflags '-fno-asynchronous-unwind-tables'
to avoid the MinGW build error:
Error: invalid register for .seh_savexmm
Fixes: 5c38c33f78 ("net/i40e: disable AVX512 with MinGW")
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Tested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
The original code causes wrong value to be set into PFQF_HENA
register because unnecessary calling to get translated pctype
value for X722 NIC. As a result RSS is not working.
So remove the unnecessary translation.
Fixes: ef4c16fd91 ("net/i40e: refactor RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
The `data_sz` name is fine, but it looks out of place because nothing
else has "data" prefix in that structure. Rename it to "size", as well
as add more clarity to the comments around each struct member.
Fixes: 6a17919b0e ("eal: change power intrinsics API")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Disable i40e AVX512 code path for Windows build to
avoid the MinGW build error:
Error: invalid register for .seh_savexmm
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
This config item is not exposed anymore now that we removed make
support.
Note: all architectures provide vectorised functions.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: c1715402df ("i40evf: fix jumbo frame support")
Fixes: 43e5488c0a ("net/i40e: support MTU configuration")
Fixes: a778a1fa2e ("i40e: set up and initialize flow director")
Fixes: c3ac7c5b0b ("net/i40e: convert to new Rx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Optimize Tx path by using AVX512 instructions and vectorize the
tx free bufs process.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
