- added VXLAN, GENEVE and NVGRE tunnel flow types
- added PORT flow type for accounting physical/virtual
port or channel number in flow creation
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Converted rte_eth_dev_get_port_by_name to a public API.
Converted rte_eth_dev_get_name_by_port to a public API.
The librte_pdump library provides the APIs to enable or disable the
packet capture either using the port id or pci address or device name.
So pdump library need to do a mapping from name to port and port to name
internally to validate the device name and register the Rx and Tx
callbacks for the mapped ports. So these APIs are made public for the
pdump library for doing the mentioned mappings.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The new fields nb_rx_queues and nb_tx_queues are added to the
rte_eth_dev_info structure.
Changes to API rte_eth_dev_info_get() are done to update these new fields
to the rte_eth_dev_info object.
Release notes is updated with the changes.
The librte_pdump library needs to register Rx and Tx callbacks for all
the nb_rx_queues and nb_tx_queues, when application wants to capture the
packets on all the software configured number of Rx and Tx queues of the
device. So far there is no support to get nb_rx_queues and nb_tx_queues
information from the ethdev library. Hence these changes are introduced.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Added new public api rte_eth_add_first_rx_callback to add given
callback as head of the list.
The librte_pdump library should display Rx packets of the
NIC even before they are being processed by other callbacks
of the application (because other callbacks of the application
may change the packet data as part of the processing).
So packet capturing framework should register a callback at the
head of the Rx callback list so that callback always gets called
first before any other callbacks of the applications. Hence this API
is introduced.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the test-pmd
and proc_info applications to use the new xstats API, and removes
deprecated code associated with the old API.
Signed-off-by: Remy Horton <remy.horton@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the xstats
functions to instead use a numeric identifier rather than a string, and
adds the ability to retrieve identifier-to-string mappings.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Following the discussion on dpdk-users [1], enhance the API
documentation of rte_eth_tx_burst() to specify that the mbufs have to be
allocated from a pool.
[1] http://dpdk.org/ml/archives/users/2016-June/000618.html
Reported-by: Xiaoban Wu <xiaoban_wu@student.uml.edu>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Some statistics were deprecated since release 2.1 (49f386542a).
The last deprecated counter to be used was imcasts.
The VF loopback statistics are also removed as they are used only
in igb and duplicated in extended statistics.
The new counters should be added to extended statistics.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This change is to make user code simpler. For PMDs which do not fill any
packet types, return 0 instead of -ENOTSUP as suggested by Bruce.
Usually, users only care if the required (by ptype_mask) ptypes can be
filled by the specified PMD. If the PMD implements dev_supported_ptypes_get
func is not important. And the introduce of another return value (-ENOTSUP)
would increase the complexity of user programs to check it.
Besides, there are ways to know if a PMD implements the func:
a. see doc/guides/nics/overview.rst.
b. use (~1) as parameter ptype_mask, then check if return 0.
Fixes: 78a38edf66 ("ethdev: query supported packet types")
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The link speed configuration is now done with bitmaps so 100G speed
requires only a new bit flag.
The actual link speed is a number so its size must be increased from
16-bit to 32-bit.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tested-by: Matej Vido <vido@cesnet.cz>
This patch redesigns the API to set the link speed/s configuration
of an ethernet port. Specifically:
- it allows to define a set of advertised speeds for
auto-negociation.
- it allows to disable link auto-negociation (single fixed speed).
- default: auto-negociate all supported speeds.
A flag autoneg in struct rte_eth_link indicates if link speed was a
result of auto-negociation or was fixed by configuration.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The speed capabilities of a device can be retrieved with
rte_eth_dev_info_get().
The new field speed_capa is initialized in the drivers without
taking care of device characteristics in this patch.
When the capabilities of a driver are accurate, the table in
overview.rst must be filled.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
The speed numbers ETH_LINK_SPEED_ are renamed ETH_SPEED_NUM_.
The prefix ETH_LINK_SPEED_ is kept for AUTONEG and will be used
for bit flags in next patch.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Some duplex values are replaced from 0 to half-duplex when link is down.
Some drivers are still using their own constants for duplex modes.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When Linux PF and DPDK VF are used for i40e PMD, when a PF reset occurs,
an interrupt will go via adminq event to inform the VF of the reset.
A callback mechanism is introduced for the VF to allow it to invoke a
registered callback when PF reset happens.
Users can register a callback for this interrupt event using:
rte_eth_dev_callback_register(portid,
RTE_ETH_EVENT_INTR_RESET,
reset_event_callback,
arg);
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds a below event type.
- RTE_ETH_EVENT_QUEUE_STATE
This event will occur when some queues are enabled or disabled.
So far, only vhost PMD supports the event, and it indicates some queues
are enabled or disabled by virtio-net device. Such an event is needed
because virtio-net device may not enable all queues vhost PMD prepare.
Because only vhost PMD uses the event so far, it isn't an actual hardware
interrupt but a simple software event.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Minor modification to event name and comment:
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add a new API rte_eth_dev_get_supported_ptypes to query what packet types
can be filled by a given device. The device should be already started or
its PMD RX burst function already decided, since the packet types supported
may vary depending on RX function.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Ensure that a bonded slave device is not detached,
until it is removed from the bonded device.
Fixes: 2efb58cbab ("bond: new link bonding library")
Fixes: a45b288ef2 ("bond: support link status polling")
Fixes: 494adb7f63 ("ethdev: add device fields from PCI layer")
Fixes: b1fb53a39d ("ethdev: remove some PCI specific handling")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
X550 will do VxLAN & NVGRE RX checksum off-load automatically.
This patch exposes the result of the checksum off-load.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The names of function for tunnel port configuration are not
accurate. They're tunnel_add/del, better change them to
tunnel_port_add/del.
The old functions are directly replaced because the API and ABI
compatibility of ethdev are already broken in 16.04.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add functions to support l2 tunnel configuration and operations.
1, L2 tunnel ether type modification.
It means modifying the ether type of a specific type of tunnel.
So the packet with this ether type will be parsed as this type
of tunnel.
2, Enabling/disabling l2 tunnel support.
It means enabling/disabling the ability of parsing the specific
type of tunnel. This ability should be enabled before we enable
filtering, forwarding, offloading for this specific type of
tunnel.
3, Insertion and stripping for l2 tunnel tag.
4, Forwarding the packets to a pool based on l2 tunnel tag.
Only support e-tag tunnel now.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
In order to set ether type of VLAN for single VLAN, inner
and outer VLAN, the VLAN type as an input parameter is added
to 'rte_eth_dev_set_vlan_ether_type()'.
In addition, corresponding changes in e1000, ixgbe and i40e
are also added.
It is an ABI break but ethdev library is already bumped for 16.04.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Many sample apps include internal buffering for single-packet-at-a-time
operation. Since this is such a common paradigm, this functionality is
better suited to being implemented in the ethdev API.
The new APIs in the ethdev library are:
* rte_eth_tx_buffer_init - initialize buffer
* rte_eth_tx_buffer - buffer up a single packet for future transmission
* rte_eth_tx_buffer_flush - flush any unsent buffered packets
* rte_eth_tx_buffer_set_err_callback - set up a callback to be called in
case transmitting a buffered burst fails. By default, we just free the
unsent packets.
As well as these, an additional reference callbacks are provided, which
frees the packets:
* rte_eth_tx_buffer_drop_callback - silently drop packets (default
behavior)
* rte_eth_tx_buffer_count_callback - drop and update user-provided counter
to track the number of dropped packets
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Several NICs can handle 512 entries/queues in their RETA table,
an 8 bit field is not large enough for them.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
slow-path data structures need not be 128-byte cache aligned.
Reduce the alignment to 64-byte to save the memory.
No behavior change for 64-byte cache aligned systems as minimum
cache line size as 64.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
RTE_PMD_DEBUG_TRACE was changed also to support pedantic flag,
but not completely.
the macro changed only under the RTE_LIBRTE_ETHDEV_DEBUG define,
but when RTE_LIBRTE_ETHDEV_DEBUG is not defined the old format
was left.
fix the macro to support pedantic flag in any case.
Fixes: b974e4a40c ("ethdev: make error checking macros public")
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
The functions rte_eth_rx_queue_count and rte_eth_descriptor_done are
supported by very few PMDs. Therefore, it is best to check for support
for the functions in the ethdev library, so as to avoid run-time crashes
at run-time if the application goes to use those APIs. Similarly, the
port parameter should also be checked for validity.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The functions for rx/tx burst, for rx_queue_count and descriptor_done in
the ethdev library all had two copies of the code. One copy in
rte_ethdev.h was inlined for performance, while a second was in
rte_ethdev.c for debugging purposes only. We can eliminate the second
copy of the functions by moving the additional debug checks into the
copies of the functions in the header file. [Any compilation for
debugging at optimization level 0 will not inline the function so the
result should be same as when the function was in the .c file.]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Move the function pointer and port id checking macros to rte_ethdev and
rte_dev header files, so that they can be used in the static inline
functions there. Also replace the RTE_LOG call within
RTE_PMD_DEBUG_TRACE so this macro can be built with the -pedantic flag
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add additional functions to support the existing IEEE1588
functionality.
* rte_eth_timesync_write_time(): set the device clock time.
* rte_eth_timesync_read_time(): get the device clock time.
* rte_eth_timesync_adjust_time(): adjust the device clock time.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
Use deprecated attribute to highlight any use of fields that
are marked as going away in the rte_ether device statistics.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The tx_rate unit is Mbps.
Gleaned from the ixgbe implementation, the 82599 datasheet and the use
in test-pmd.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Following the same approach taken with dev_started field
in rte_eth_dev_data structure, this patch adds two new fields
in it, rx_queue_state and tx_queue_state arrays, which track
which queues have been started and which not.
This is important to avoid trying to start/stop twice a queue,
which will result in undefined behaviour
(which may cause RX/TX disruption).
Mind that only the PMDs which have queue_start/stop functions
have been changed to update this field, as the functions will
check the queue state before switching it.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The driver fields have been added the rte_eth_dev_data so that it is no
longer necessary access this data through the pci_dev pointer.
The following fields have been added to rte_eth_dev_data:
dev_flags, and macros for dev_flags.
kdrv
numa_node
drv_name
Add function rte_eth_copy_pci_info
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
[Thomas: remove useless flags]
Remove the deprecation tag and notice for imissed as it is a generic
register that accounts for packets that were dropped by the HW,
because there are no available mbufs (RX queues are full). imissed is
different to ierrors and can help with general debug.
Fixes: 49f386542a ("ethdev: remove driver specific stats")
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Add the ability for the upper layer to query RX/TX queue information.
Add into rte_eth_dev_info new fields to represent information about
RX/TX descriptors min/max/alig nnumbers per queue for the device.
Add new structures:
struct rte_eth_rxq_info
struct rte_eth_txq_info
new functions:
rte_eth_rx_queue_info_get
rte_eth_tx_queue_info_get
into rte_etdev API.
Left extra free space in the queue info structures,
so extra fields could be added later without ABI breakage.
Add new fields:
rx_desc_lim
tx_desc_lim
into rte_eth_dev_info.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds one new API to get dcb related info.
rte_eth_dev_get_dcb_info
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Old flow director API have been replaced by rte_eth_dev_filter_ctrl
since release 2.0. And no driver in current code support these functions.
All the removed functions are listed below:
- rte_eth_dev_fdir_add_perfect_filter;
- rte_eth_dev_fdir_add_signature_filter;
- rte_eth_dev_fdir_get_infos;
- rte_eth_dev_fdir_remove_perfect_filter;
- rte_eth_dev_fdir_remove_signature_filter;
- rte_eth_dev_fdir_set_masks;
- rte_eth_dev_fdir_update_perfect_filter;
- rte_eth_dev_fdir_update_signature_filter;
The library version was already incremented in a previous patch.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
[Thomas: fix mlx4 and update release notes]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The Rx interrupt feature is now part of the standard ABI.
Because of changes in rte_intr_handle and struct rte_eth_conf,
the eal and ethdev library versions are incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Fix for ABI breakage introduced in LRO addition. Moves
lro bitfield to the end of the struct/member.
Fixes: 8eecb3295a (ixgbe: add LRO support)
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com>
The patch adds two dev_ops functions to enable and disable rx queue
interrupts.
In addition, it adds rte_eth_dev_rx_intr_ctl/rx_intr_q to support
per port or per queue rx intr event set.
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Move #ifdef __cplusplus to the end of the file.
Fixes: 64b7acd861 ("ethdev: add multicast address filtering")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The function rte_eth_dev_is_valid_port is good way to have all
drivers using same function and solves several hotplug related
bugs from drivers not checking attached flag.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The internal functions must be marked with the doxygen command @internal.
The allocate and release_port functions are not restricted only to dummy
drivers.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Remove non generic stats in rte_stats_strings and mark the relevant
fields in struct rte_eth_stats as deprecated.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
add new apis:
- rte_eth_dev_get_reg_length
- rte_eth_dev_get_reg_info
- rte_eth_dev_get_eeprom_length
- rte_eth_dev_get_eeprom
- rte_eth_dev_set_eeprom
to enable reading device parameters (register and
eeprom) based upon ethtool alike data parameter specification.
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add new api:
- rte_eth_dev_default_mac_addr_set
The new api, rte_eth_dev_default_mac_addr_set, uses the
existing dev_op, mac_addr_set, to enable setting mac
addr from ethdev level.
Signed-off-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Acked-by: Andrew Harvey <agh@cisco.com>
Acked-by: David Harton <dharton@cisco.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Change the order that user supplied RX and TX callbacks are called
to the order that they were added (fifo).
The previous calling order was the reverse of this (lifo) and was
counter intuitive for users.
Suggested-by: Robert Sanford <rsanford@akamai.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
The patch fixes doxygen comments of below functions.
- rte_eth_dev_close()
Add description about when the function can be called and also about
what kind of resources will be freed.
- rte_eth_dev_detach()
Add description about when the function can be called.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add ethdev API to enable and read IEEE1588/802.1AS PTP timestamps
from devices that support it. The following functions are added:
rte_eth_timesync_enable()
rte_eth_timesync_disable()
rte_eth_timesync_read_rx_timestamp()
rte_eth_timesync_read_tx_timestamp()
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
[Thomas: merged with new macro VALID_PORTID_OR_ERR_RET]
To support querying hash key size per port, an new field of
'hash_key_size' was added in 'struct rte_eth_dev_info' for storing
hash key size in bytes.
The correct hash key size in bytes should be filled into the
'struct rte_eth_dev_info', to support querying it.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This path renames the mirror type in rte_eth_mirror_conf and macros,
and rework the mirror set in ixgbe drivers by using new definition.
It also fixes some coding style.
Test report: http://dpdk.org/ml/archives/dev/2015-June/019118.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Rename rte_eth_vmdq_mirror_conf to rte_eth_mirror_conf and move
the maximum rule id check from ethdev level to driver.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
It configures specific registers to enable double vlan stripping
on RX side and insertion on TX side.
The RX descriptors will be parsed, the vlan tags and flags will be
saved to corresponding mbuf fields if vlan tag is detected.
The TX descriptors will be configured according to the
configurations in mbufs, to trigger the hardware insertion of
double vlan tags for each packets sent out.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The parameter tx_free_thresh is not consistent between the drivers:
some use it as rte_eth_tx_burst() requires, some release buffers when
the number of free descriptors drop below this value.
Let's use it as most fast-path code does, which is the latter, and update
comments throughout the code to reflect that.
Signed-off-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
With the current PMD API, the receipt of multicast packets on a given
port can only be enabled by invoking the "rte_eth_allmulticast_enable"
function.
This method may not work on Virtual Functions in SR-IOV architectures
when the host PF driver does not allow such operation on VFs.
In such cases, joined multicast addresses must be individually added
in the set of multicast addresses that are filtered by the [VF] port.
For this purpose, a new function "set_mc_addr_list" is introduced
into the set of functions that are exported by a Poll Mode Driver.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: export new function in .map]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The ethdev header file includes the mbuf header file, but it does not
need to do so as it only uses pointers to the struct rte_mbuf type, and
does not use any of the mbuf internals, nor any of the mbuf functions or
macros. Therefore the inclusion is unnecessary, and can be replaced by a
forward declaration of the mbuf type.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
- Only x540 and 82599 devices support LRO.
- Add the appropriate HW configuration.
- Add RSC aware rx_pkt_burst() handlers:
- Implemented bulk allocation and non-bulk allocation versions.
- Add LRO-specific fields to rte_eth_rxmode, to rte_eth_dev_data
and to ixgbe_rx_queue.
- Use the appropriate handler when LRO is requested.
Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The ethernet device ops function table should be made const for
safety and security.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Added a parameter to the RX callback to pass in the number of
available RX packets in addition to the number of dequeued packets.
This provides the RX callback functions with additional information
that can be used to decide how packets from a burst are handled.
The TX callback doesn't require this additional parameter so the RX
and TX callbacks no longer have the same function parameters. As such
the single RX/TX callback has been refactored into two separate callbacks.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The data structure for the rx and tx callbacks is local to each process
since it contains function pointers and cannot be shared between
different unique binaries. However, because it is not in
rte_eth_dev_data structure, the array is not getting initialized for
secondary processes - neither is it getting appropriately resized if the
number of RX/TX queues changes. This causes crashes in secondary
processes as they dereference a null pointer in struct rte_eth_dev.
This patch fixes this by introducing an upper-bound on the number of
queues per port that can be configured, and then uses this to make the
array statically sized, thereby avoiding the crashes.
Fixes: 4dc294158c ("ethdev: support optional Rx and Tx callbacks")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The pointer to struct eth_driver is not used and is already set
in struct rte_eth_dev.
It's a small cleanup in PMD API which probably needs more
attention to make clear what is a driver, a PCI driver, an
ethernet driver, etc.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
These functions are used for attaching or detaching a port.
When rte_eth_dev_attach() is called, the function tries to realize the
device name as pci address. If this is done successfully,
rte_eth_dev_attach() will attach physical device port. If not, attaches
virtual devive port.
When rte_eth_dev_detach() is called, the function gets the device type
of this port to know whether the port is come from physical or virtual.
And then specific detaching function will be called.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
This new parameter is needed to keep device type like PCI or virtual.
Port detaching processes are different between PCI device and virtual
device.
RTE_ETH_DEV_PCI indicates device type is PCI. RTE_ETH_DEV_VIRTUAL
indicates device is virtual.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
The patch adds function pointer to rte_pci_driver and eth_driver
structure. These function pointers are used when ports are detached.
Also, the patch adds rte_eth_dev_uninit(). So far, it's not called
by anywhere, but it will be called when port hotplug function is
implemented.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
This patch adds rte_eth_dev_release_port(). The function is used for
changing an attached status of the device that has specified name.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
To remove assumption, do like followings.
This patch adds "RTE_PCI_DRV_DETACHABLE" to drv_flags of rte_pci_driver
structure. The flags indicate the driver can detach devices at runtime.
Also, remove assumption that port will not be detached.
To remove the assumption.
- Add 'attached' member to rte_eth_dev structure.
This member is used for indicating the port is attached, or not.
DEV_ATTACHED indicates a port is attached.
DEV_DETACHED indicates a port is detached.
- Add rte_eth_dev_allocate_new_port().
This function is used for allocating new port.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add optional support for inline processing of packets inside the RX
or TX call. For an RX callback, what happens is that we get a set of
packets from the NIC and then pass them to a callback function, if
configured, to allow additional processing to be done on them, e.g.
filling in more mbuf fields, before passing back to the application.
On TX, the packets are similarly post-processed before being handed
to the NIC for transmission.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The 'callbacks' member of the rte_eth_dev structure has been renamed
to 'link_intr_cbs' to make it clear that it refers to callbacks from
NIC interrupts. This allows us to add other types of callbacks to
the structure without ambiguity.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
RSS offload types were defined separately for 1/10G and 40G NICs,
and have no relationship with flow types. The modifications are to
unify all RSS offload types for all PMDs. Unified RSS offload types
have new and common names which can be used for any PMD or
applications, and decouple from specific hardwares.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: merge with fm10k]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Following structures are removed:
- rte_2tuple_filter
- rte_5tuple_filter
Following APIs are removed:
- rte_eth_dev_add_2tuple_filter
- rte_eth_dev_remove_2tuple_filter
- rte_eth_dev_get_2tuple_filter
- rte_eth_dev_add_5tuple_filter
- rte_eth_dev_remove_5tuple_filter
- rte_eth_dev_get_5tuple_filter
It also move macros TCP_*_FLAG to rte_eth_ctrl.h, and removes the macro
TCP_UGR_FLAG which is duplicated with TCP_URG_FLAG.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
[Thomas: remove also from version map]
This patch defines ntuple filter type RTE_ETH_FILTER_NTUPLE and its structure rte_eth_ntuple_filter.
It also corrects the typo TCP_UGR_FLAG to TCP_URG_FLAG
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Structure rte_syn_filter is removed.
Following APIs are removed:
- rte_eth_dev_add_syn_filter
- rte_eth_dev_remove_syn_filter
- rte_eth_dev_get_syn_filter
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: remove also from version map]
Structure rte_flex_filter is removed.
Following APIs are removed:
- rte_eth_dev_add_flex_filter
- rte_eth_dev_remove_flex_filter
- rte_eth_dev_get_flex_filter
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
[Thomas: remove also from version map]
This patch removes the flexbytes_offset from rte_fdir_conf, because
the flexible payload setting is done by flex_conf instead of flexbytes_offset.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Need to have do special things to set default mac address.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Implement VLAN stripping in software. This allows application
to be device independent.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
rte_eth_stats_get is to get physical device statistics. Without
return status, caller does not know whether function fails or not
(i.e. invalid port_id, driver has no stats_get callback). Caller
cannot differiente normal 0 stats or error case. This fix adds
a return status to the function.
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
If the flag is advertised by a PMD, the NIC supports the outer IP
checksum TX offload of tunneling packets, therefore an application can
set the PKT_TX_OUTER_IP_CKSUM flag in mbufs when transmitting on this
port.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Structure rte_ethertype_filter is removed.
Following APIs are removed:
- rte_eth_dev_add_ethertype_filter
- rte_eth_dev_remove_ethertype_filter
- rte_eth_dev_get_ethertype_filter
It is replaced by filter_ctrl API.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
In commit 59d0ecdbf0 ("MTU accessors"),
max_frame_size was replaced with mtu.
Default size is ETHER_MTU = 1500.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The parameters port_id didn't match with comments about port.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
define structures for getting flow director information includes:
- mode
- supported flow types
- table space
- flexible payload size and granularity
- configured flexible payload and mask information
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As 40G NIC supports different sizes (128/512/64 entries) of
redirection table from that (128 entries) of 1G and 10G NICs,
support of multiple sizes of redirection table is needed.
It includes,
* Redefine 'struct rte_eth_rss_reta' in ethdev.
- To 'struct rte_eth_rss_reta_entry64' which contains 64
entries and 64 bits mask.
- Array of above new structure can be used for any number of
redirection table entries, as long as the number is multiple
of 64. This is quite flexible for the future expanding of
redirection table.
* Redefinition of relevant interfaces in ethdev.
- Interface of reta update has been redefined with new parameters.
- Interface of reta query has been redefined with new parameters.
* Rework of 1G PMD in igb.
- reta update has been reworked.
- reta query has been reworked.
* Rework of 10G PMD in ixgbe.
- reta update has been reworked.
- reta query has been reworked.
* Rework of 40G PMD (PF only) in i40e.
- reta update has been reworked.
- reta query has been reworked.
* Implement relevant commands in testpmd.
Test report: http://dpdk.org/ml/archives/dev/2014-November/008362.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Erlu Chen <erlu.chen@intel.com>
As more and more information are different between PF and VF,
ops of 'dev_infos_get' has been implemented respectively. In
addition, new field of 'reta_size' has been added in
'struct rte_eth_dev_info' for returning redirection table size.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add support of setting hash lookup table size according
to the hardawre capability.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add vmdq rx mode field into rx config struct, it is flag from ETH_VMDQ_ACCEPT_*.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The change includes several parts:
1. Clear pool bitmap when trying to remove specific MAC.
2. Define RSS, DCB and VMDQ flags to combine rx_mq_mode.
3. Use 'struct' to replace 'union', which to expand the rx_adv_conf
arguments to better support RSS, DCB and VMDQ.
4. Fix bug in rte_eth_dev_config_restore function, which will restore
all MAC address to default pool.
5. Define additional 3 arguments for better VMDQ support.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add two functions to support UDP tunneling port configuration.
There are "some" destination UDP port numbers that have unique meaning.
In terms of VxLAN, "IANA has assigned the value 4789 for the VXLAN UDP port,
and this value SHOULD be used by default as the destination UDP port.
Some early implementations of VXLAN have used other values for the destination
port. To enable interoperability with these implementations, the destination
port SHOULD be configurable."
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Define a new API umbrella to configure any kind of Rx filtering.
New functions:
- rte_eth_dev_filter_supported
- rte_eth_dev_filter_ctrl
Filter types, operations, and structures are defined specifically in new
header file lib/librte_eth/rte_dev_ctrl.h.
As to the implementation discussion, please refer to
http://dpdk.org/ml/archives/dev/2014-September/005179.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
[Thomas: rename ops and remove unused types]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Forced type conversion is not needed to define a macro with
constant. The alternate is to let compiler use the default width,
or specify the width with suffix of 'U', 'UL', 'ULL', etc.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Many sample apps use duplicated code to set rte_eth_txconf and rte_eth_rxconf
structures. This patch allows the user to get a default optimal RX/TX configuration
through rte_eth_dev_info get, and still any parameters may be tweaked as wished,
before setting up queues.
Besides, if a NULL pointer is passed to rte_eth_rx_queue_setup or
rte_eth_tx_queue_setup, these functions get internally the default RX/TX
configuration for the user.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
[Thomas: split patch]
