Firmware supports ntuple configuration which is always based on 4-tuples.
So remove RTE_ETH_FLOW_FRAG_IPV4 and RTE_ETH_FLOW_FRAG_IPV6 as valid flows.
Also merge the two switch statements into one.
Fixes: 622075356e ("net/qede: support ntuple and flow director filter")
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Use new mbuf flags PKT_RX_VLAN_STRIPPED and PKT_RX_QINQ_STRIPPED
introduced by the patch:
commit b37b528d95 ("mbuf: add new Rx flags for stripped VLAN")
Signed-off-by: Harish Patil <harish.patil@cavium.com>
This defect is a functional issue where the RX CQE pointer remains
uninitialized in the LRO code path which can cause null pointer exception
while accessing VLAN or RSS hash value from CQE.
Coverity issue: 143474
Fixes: 29540be7ef ("net/qede: support LRO/TSO offloads")
Signed-off-by: Harish Patil <harish.patil@cavium.com>
- Add a common routine to handle ETH_RX_CQE_TYPE_TPA_CONT and
ETH_RX_CQE_TYPE_TPA_END.
- Remove enum qede_agg_state since there is no need to maintain
aggregation state.
- Modify the segment chaining logic by tracking head and tail
TPA segments of each aggregation.
- Add more debug and comments.
- Mark the packet as PKT_RX_LRO.
Fixes: 29540be7ef ("net/qede: support LRO/TSO offloads")
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Perform reset of the fastpath RX/TX rings after stopping device port and
not while starting the ports.
Fixes: cfe28a9885 ("net/qede: support unequal number of Rx/Tx queues")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
- In qede_mac_addr_set(), in order to configure default MAC address we
first delete the existing MAC address before trying to add new one. During
init time, there is no MAC filter to begin with, so trying to remove a
non-existing MAC address causes a firmware exception. This can be prevented
by internally calling qede_mac_addr_add() which has the checks in place to
delete a MAC address only if it was added before.
- Remove setting of the default MAC address from within
qede_dev_configure() since rte_eth_dev_start() calls mac_addr_set() anyway.
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Only masked bits must be set in Verbs specification for a rule to be valid.
Fixes: 2097d0d1e2 ("net/mlx5: support basic flow items and actions")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Testpmd failed to start when CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC
is disabled, the root cause is the length of sw_ring and queue are
incorrect with the above configuration.
Fixes: 0be2953129 ("net/i40e: fix compile error")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Recently link status change interrupt was enabled by default in testpmd,
it has opened the driver bug with not working LSC interrupt if either
igb_uio or uio_pci_generic kernel driver is used.
Fixes: 06bc197796 ("net/sfc: interrupts support sufficient for event queue init")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Previous too pessimistic estimation made completely impossible to send
packets with many segments (more than 100 with minimum Tx ring size).
Fixes: 8b00f426eb ("net/sfc: implement EF10 native Tx datapath")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
When Receive Side Coalescing (RSC) is not used, the RSC Disable
(RSC_DIS) filed of register Receive Filter Control Register (RFCTL)
should be set according to ixgbe datasheet.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
* Acquire PHY semaphore before device reset
* Add support for 2.5G KX physical layer
* Add MAC X550em/X557 LED on|off support
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch updates ixgbe_led_[on|off]_t_X550em for MAC or PHY connected
LEDs. To support both MAC or PHY connected LEDs, both MAC and PHY led
control registers are configured.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Add another define for the 2.5G KX physical layer. This requires all
variables and support functions that deal with "physical_layer" to be
bumped to u64 as this is the 33rd define.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
A recent firmware change fixed an issue to acquire the PHY semaphore
before accessing PHY registers. This led to a case where SW can issue
a device reset clearing the MDIO registers. This patch makes SW acquire
the PHY semaphore before issuing a device reset.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
The hugepage memory limitation of 32 bit application is
"1GB size" but not "1GB per page size".
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
When parsing a CLI, all the CLI instances are checked
one by one. Even if an instance already matches the CLI,
the parsing will not stop for ambiguous check.
The problem is that the following check may change the
parsing result of the previous one even if the following
instance doesn't match.
Use a temporary validate for the parsing result when
trying to match an instance and only store the result
when it matches, so the previous result has no chance
to be changed.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This commit addresses the following errors:
In file included from build/include/rte_latencystats.h:43:0,
from /tmp/check-includes.sh.6580.c:1:
build/include/rte_metrics.h:91:2: error: unknown type name 'uint16_t'
[...]
In file included from /tmp/check-includes.sh.6580.c:1:0:
build/include/rte_latencystats.h:66:19: error: expected declaration
specifiers or '...' before '*' token
[...]
Fixes: 5cd3cac9ed ("latency: added new library for latency stats")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit addresses the following error:
In file included from /tmp/check-includes.sh.28023.c:1:0:
build/include/rte_bitrate.h:82:2: error: unknown type name 'uint8_t'
[...]
It also adds C++ awareness to rte_bitrate.h.
Fixes: 2ad7ba9a65 ("bitrate: add bitrate statistics library")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This commit addresses the following compilation errors:
In file included from /tmp/check-includes.sh.21060.c:1:0:
build/include/rte_metrics.h:91:2: error: unknown type name 'uint16_t'
[...]
It also adds C++ awareness to rte_metrics.h.
Fixes: 349950ddb9 ("metrics: add information metrics library")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This commit addresses the following compilation errors:
In file included from /tmp/check-includes.sh.8373.c:1:0:
build/include/rte_efd.h:133:9: error: unknown type name 'uint8_t'
[...]
Fixes: 56b6ef874f ("efd: new Elastic Flow Distributor library")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Exported headers must allow compilation with the strictest flags. This
commit addresses the following errors:
In file included from build/include/rte_eventdev_pmd.h:55:0,
from /tmp/check-includes.sh.25816.c:1:
build/include/rte_eventdev.h:908:8: error: struct has no named members
[-Werror=pedantic]
[...]
In file included from /tmp/check-includes.sh.25816.c:1:0:
build/include/rte_eventdev_pmd.h:65:35: error: ISO C does not permit named
variadic macros [-Werror=variadic-macros]
[...]
Fixes: 71f2384328 ("eventdev: introduce event driven programming model")
Fixes: 4f0804bbdf ("eventdev: implement the northbound APIs")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit addresses the following compilation errors:
In file included from build/include/rte_cryptodev_scheduler.h:37:0,
from /tmp/check-includes.sh.5355.c:1:
build/include/rte_cryptodev_scheduler_operations.h:43:30: error: unknown
type name 'uint8_t' struct rte_cryptodev *dev, uint8_t slave_id);
[...]
Fixes: 097ab0bac0 ("crypto/scheduler: add API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Exported headers must allow compilation with the strictest flags. This
commit addresses the following errors:
In file included from /tmp/check-includes.sh.20132.c:1:0:
build/include/rte_vhost.h:73:30: error: ISO C forbids zero-size array
'regions' [-Werror=pedantic]
[...]
Also:
- Add C++ awareness to rte_vhost.h for consistency with rte_eth_vhost.h.
- Move Linux includes into C++ block to prevent linking issues with
exported symbols.
- Update check-includes.sh following the removal of rte_virtio_net.h.
Finally, update check-includes.sh to ignore rte_vhost.h and rte_eth_vhost.h
from now on since the Linux headers they depend on are not clean enough:
In file included from /usr/include/linux/vhost.h:17:0,
from build/include/rte_vhost.h:43,
from build/include/rte_eth_vhost.h:44,
from /tmp/check-includes.sh.20132.c:1:
/usr/include/linux/virtio_ring.h: In function 'vring_init':
/usr/include/linux/virtio_ring.h:146:16: error: pointer of type 'void *'
used in arithmetic [-Werror=pointer-arith]
[...]
In file included from build/include/rte_vhost.h:43:0,
from build/include/rte_eth_vhost.h:44,
from /tmp/check-includes.sh.20132.c:1:
/usr/include/linux/vhost.h: At top level:
/usr/include/linux/vhost.h:73:3: error: ISO C99 doesn't support unnamed
structs/unions [-Werror=pedantic]
[...]
Fixes: eb32247457 ("vhost: export guest memory regions")
Fixes: a798beb47c ("vhost: rename header file")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This commit addresses several errors related to missing includes such as:
In file included from /tmp/check-includes.sh.15315.c:1:0:
build/include/rte_avp_fifo.h:77:22: error: 'struct rte_avp_fifo' declared
inside parameter list [-Werror]
[...]
build/include/rte_avp_fifo.h: In function 'avp_fifo_init':
build/include/rte_avp_fifo.h:81:3: error: implicit declaration of function
'rte_panic' [-Werror=implicit-function-declaration]
[...]
build/include/rte_avp_fifo.h:83:6: error: dereferencing pointer to
incomplete type
[...]
build/include/rte_avp_fifo.h:109:2: error: implicit declaration of
function 'rte_wmb' [-Werror=implicit-function-declaration]
[...]
In file included from /tmp/check-includes.sh.15315.c:1:0:
build/include/rte_avp_common.h:104:2: error: unknown type name 'uint64_t'
[...]
build/include/rte_avp_common.h:386:15: error: 'ETHER_ADDR_LEN' undeclared
here (not in a function)
[...]
It addresses errors with strict compilation flags:
In file included from /tmp/check-includes.sh.15315.c:1:0:
build/include/rte_avp_common.h:122:3: error: ISO C99 doesn't support
unnamed structs/unions [-Werror=pedantic]
[...]
build/include/rte_avp_common.h:136:17: error: ISO C forbids zero-size
array 'buffer' [-Werror=pedantic]
[...]
And also adds C++ awareness to both header files.
Fixes: 8e680655e2 ("net/avp: add public header files")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
E-Tag and NVGRE pattern items have been added hastily without updating
documentation nor testpmd.
This commit also adds default masks for these items based on the ixgbe
implementation.
Fixes: 99e7003831 ("net/ixgbe: parse L2 tunnel filter")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This commit addresses the following compilation errors:
In file included from build/include/rte_flow_driver.h:50:0,
from /tmp/check-includes.sh.1397.cc:1:
build/include/rte_flow.h:428:2: error: expected primary-expression before
'.' token
[...]
build/include/rte_flow.h:469:1: sorry, unimplemented: non-trivial
designated initializers not supported
[...]
In file included from build/include/rte_flow_driver.h:50:0,
from /tmp/check-includes.sh.1397.cc:1:
build/include/rte_flow.h:631:1: error: C99 designator 'label_tc_s' outside
aggregate initializer
[...]
build/include/rte_flow.h:631:1: error: initializer-string for array of
chars is too long [-fpermissive]
[...]
build/include/rte_flow.h:650:1: sorry, unimplemented: non-trivial
designated initializers not supported
[...]
C++ does not support the C99-style designated initializers used in this
file for the default item masks. While the resulting symbols are primarily
useful to PMDs (written in C), they are exposed as part of the public API
for documentation purposes and to assist application writers.
Considering that:
- using pre-C99 initialization style for compatibility with C++ would
render them difficult to understand (all struct members must be
initialized)
- using both initialization styles would be needlessly verbose
- not exposing them at all would defeat their purpose
- applications do not normally need these symbols at run time
This commit hides these symbols from C++ applications. Specific C++
initializers will be added later if necessary.
Fixes: 6de5c0f130 ("ethdev: define default item masks in flow API")
Fixes: 7cd048321d ("ethdev: add MPLS and GRE flow API items")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This commit addresses the following errors:
In file included from /tmp/check-includes.sh.18889.c:1:0:
build/include/rte_net_crc.h:86:1: error: unknown type name 'uint32_t'
[...]
Fixes: 986ff526fb ("net: add CRC computation API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
This commit addresses the following errors:
In file included from /tmp/check-includes.sh.681.c:1:0:
build/include/rte_mbuf_ptype.h:587:35: error: unknown type name 'uint32_t'
[...]
build/include/rte_mbuf_ptype.h:662:51: error: unknown type name 'size_t'
[...]
Fixes: 288541c8ff ("mbuf: add functions to dump packet type")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The RTE_FUNC_*_RET() and RTE_PROC_*_RET() macro definitions in rte_dev.h
require RTE_PMD_DEBUG_TRACE(). This macro is defined as needed by users of
rte_dev.h since its value depends on their own debug settings.
It may be defined multiple times as a result when including files from
various components simultaneously. Worse, these redefinitions may be
inconsistent. This causes the following compilation errors:
In file included from /tmp/check-includes.sh.13890.c:27:0:
build/include/rte_eventdev_pmd.h:58:0: error: "RTE_PMD_DEBUG_TRACE"
redefined [-Werror]
[...]
In file included from build/include/rte_ethdev_pci.h:39:0,
from /tmp/check-includes.sh.13890.c:13:
build/include/rte_ethdev.h:1042:0: note: this is the location of the
previous definition
[...]
In file included from /tmp/check-includes.sh.13890.c:83:0:
build/include/rte_cryptodev_pmd.h:65:0: error: "RTE_PMD_DEBUG_TRACE"
redefined [-Werror]
[...]
In file included from /tmp/check-includes.sh.13890.c:27:0:
build/include/rte_eventdev_pmd.h:58:0: note: this is the location of
the previous definition
[...]
This commit moves the RTE_PMD_DEBUG_TRACE() definition to rte_dev.h where
it is enabled consistently depending on global configuration settings and
removes redundant definitions.
Also when disabled, RTE_PMD_DEBUG_TRACE() is now defined as (void)0 to
avoid empty statements warnings if used outside { } blocks.
Fixes: b974e4a40c ("ethdev: make error checking macros public")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Making AVX and AVX512 configurable is useful for performance and power
testing.
The similar kernel patch at https://patchwork.kernel.org/patch/9618883/.
AVX512 support like in rte_memcpy has been in DPDK since 16.04, but it's
still unproven in rich use cases in hardware. Therefore it's marked as
experimental for now, will enable it after enough field test and possible
optimization.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Reviewed-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
armv8 implementations may have 64B or 128B cache line.
Setting to the maximum available cache line size in generic config to
address minimum DMA alignment across all arm64 implementations.
Increasing the cacheline size has no negative impact to cache invalidation
on systems with a smaller cache line.
The need for the minimum DMA alignment has impact on functional aspects
of the platform so default config should cater the functional aspects.
There is an impact on memory usage with this scheme, but that's not too
important for the single image arm64 distribution use case.
The arm64 linux kernel followed the similar approach for single
arm64 image use case.
http://lxr.free-electrons.com/source/arch/arm64/include/asm/cache.h
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
In case the output directory (O=) is undefined or a relative directory lets
turn it into an absolute path before passing it on. Otherwise the output
directory is created relative to the subdir, e.g. pktgen/app/build/... and
pktgen/lib/lua/src/build/...
Signed-off-by: Jan Blunck <jblunck@infradead.org>
When using the compiler to link applications, include EXTRA_CFLAGS. This
is needed, for example, when cross-compiling, to pass --sysroot.
GCC cross-compilers built with Yocto don't use the --with-sysroot option,
making it necessary to pass --sysroot command-line option.
Signed-off-by: John Jacques <john.jacques@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
On i686 builds, the uin64_t type is 64-bits in size but is aligned to
32-bits only. This causes mbuf fields for rearm_data to not be 16-byte
aligned on 32-bit builds, which causes errors with some vector PMDs which
expect the rearm data to be aligned as on 64-bit.
Given that we cannot use the extra space in the data structures anyway, as
it's already used on 64-bit builds, we can just force alignment of the
physical address in the mbuf to 8-bytes in all cases. This has no effect on
64-bit systems, but fixes the updated PMDs on 32-bit.
Fixes: f4356d7ca1 ("net/i40e: eliminate mbuf write on rearm")
Fixes: f160666a10 ("net/ixgbe: eliminate mbuf write on rearm")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
If Linux UAPI headers in the system do not have VFIO_SPAPR_TCE_v2_IOMMU
defined, DPDK define necessary structures itself. However the existing
definitions are different from ones pushed to the mainline kernel.
This copies structures passed via VFIO_IOMMU_SPAPR_TCE_CREATE and
VFIO_IOMMU_SPAPR_TCE_REMOVE ioctls.
No change in behaviour is expected if installed linux UAPI headers
have knowledge of VFIO_SPAPR_TCE_v2_IOMMU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
VFIO allows a secure way of assigning devices to user space and those
devices which can not be isolated from other ones are set in same VFIO
group. Releasing or unplugging a device should be aware of remaining
devices is the same group for avoiding to close such a group.
Fixes: 94c0776b1b ("vfio: support hotplug")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
If more than one used PCI device belongs to one IOMMU group,
it is still one IOMMU group and the container IOMMU type
should be set only once.
Fixes: 94c0776b1b ("vfio: support hotplug")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The existing code initializes a PCI driver pointer but not the common one.
As the result, ring_dma_zone_reserve() in drivers/net/bnx2x/bnx2x_rxtx.c
crashed as dev->device->driver==NULL.
This adds missing initialization.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Current usertools/cpu_layout.py is broken to handle multithreads
of count more than 2 as in IBM powerpc P8 servers.
Below patch addressed this issue.
Also, added minor exception catch on failing to open unavailable
sys file in case of multithread=off configuration in server.
Patch has been verified not to break existing topology configurations
and also not changing anything in current output.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Reviewed-by: Andriy Berestovskyy <andriy.berestovskyy@caviumnetworks.com>
Script displays status for all device types and output is much
longer than it used to be. This makes harder to read script output.
This patch adds new --status-dev argument to the script to select
a device group to display status.
Supported device groups:
net
crypto
event
mempool
Sample usage:
./usertools/dpdk-devbind.py --status-dev mempool
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The following sequence of operation gives error in binding devices
1) Bind a device using dpdk-devbind.py
2) Unbind the device using kernel tools(/sys/bus/pci/device/driver/unbind)
3) Bind the device using kernel tools(/sys/bus/pci/driver/new_id and
/sys/bus/pci/driver/bind)
The bind failure was due to cached driver name in 'driver_override'.
Fix it by writing 'null' to driver_override just after binding a
device so that any method of binding/unbinding can be used.
Fixes: 2fc3502935 ("usertools: use optimized driver override scheme to bind")
Reported-by: Lijuan A Tu <lijuanx.a.tu@intel.com>
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
This script generates cscope, gtags, and tags index files based on
EAL environment(architecture and OS(linux/bsd)).
Selection of the architecture and OS environment is based on dpdk
configuration target(T=).If EAL environment(T=) is not specified,
the script generates tag files based on available source code.
Usage: make tags|cscope|gtags|etags [T=config]
example usage:
make cscope
make tags T=x86_64-native-linuxapp-gcc
make gtags T=arm64-armv8a-linuxapp-gcc
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
Some commits for stable releases (with Cc stable tag) may not have the
fixline.
Thus, this patch makes git-log-fixes.sh script also list those stable
commits do not have fixline.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
