The driver supports Hyper-V networking directly like
virtio for KVM or vmxnet3 for VMware.
This code is based off of the FreeBSD driver. The file and variable
names are kept the same to help with understanding (with most of the
BSD style warts removed).
This version supports the latest NetVSP 6.1 version and
older versions.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
This patch adds support for an additional bus type Virtual Machine BUS
(VMBUS) on Microsoft Hyper-V in Windows 10, Windows Server 2016
and Azure. Most of this code was extracted from FreeBSD and some of
this is from earlier code donated by Brocade.
Only Linux is supported at present, but the code is split
to allow future FreeBSD and Windows support.
The bus support relies on the uio_hv_generic driver from Linux
kernel 4.16. Multiple queue support requires additional sysfs
interfaces which is in kernel 5.0 (a.k.a 4.17).
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Since uuid functions may not be available everywhere, implement
uuid functions in DPDK. These are based off the BSD licensed
libuuid in util-link.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Update get_priv() to use rte_mbuf_to_priv() to access the private
area in the mbuf.
In inbound_sa_check(), use the application's get_priv() function to
access the private area in the mbuf.
Signed-off-by: Dan Gora <dg@adax.com>
Add an inline accessor function to return the starting address of
the private data area in the supplied mbuf.
This allows applications to easily access the private data area between
the struct rte_mbuf and the data buffer in the specified mbuf without
creating private macros or accessor functions.
No checks are made to ensure that a private data area actually exists
in the buffer.
Signed-off-by: Dan Gora <dg@adax.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch adds support for building and running mlx5 PMD on
32bit systems such as i686.
The main issue to tackle was handling the 32bit access to the UAR
as quoted from the mlx5 PRM:
QP and CQ DoorBells require 64-bit writes. For best performance, it
is recommended to execute the QP/CQ DoorBell as a single 64-bit write
operation. For platforms that do not support 64 bit writes, it is
possible to issue the 64 bits DoorBells through two consecutive
writes,
each write 32 bits, as described below:
* The order of writing each of the Dwords is from lower to upper
addresses.
* No other DoorBell can be rung (or even start ringing) in the midst
of an on-going write of a DoorBell over a given UAR page.
The last rule implies that in a multi-threaded environment, the access
to a UAR page (which can be accessible by all threads in the process)
must be synchronized (for example, using a semaphore) unless an atomic
write of 64 bits in a single bus operation is guaranteed. Such a
synchronization is not required for when ringing DoorBells on different
UAR pages.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The flow counter support introduced by
commit 9a761de8ea ("net/mlx5: flow counter support") was intend to
work only with MLNX_OFED_4.3 as the upstream rdma-core
libraries were lack such support.
On rdma-core v19 the support for the flow counters was added but with
different user APIs, hence causing compilation issues on the PMD.
This patch fix the compilation errors by forcing the flow counters
to be enabled only with MLNX_OFED APIs.
Once MLNX_OFED and rdma-core APIs will be aligned, a proper patch to
support the new API will be submitted.
Fixes: 9a761de8ea ("net/mlx5: flow counter support")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
RSS level is necessary to had a bit in the hash_fields which is already
provided in this API, for the tunnel, it is necessary to request such
queue to compute the checksum on the inner most, this last one should
always be activated.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
ConnectX 4-5 support only 40 bytes of RSS key, using a compiled size
hash key is not necessary.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Previous work introduce verbs priorities, whereas the PMD is making
translation between Flow priority into Verbs. Rename this to make more
sense on what the PMD has to translate.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Drop queues are essentially used in flows due to Verbs API, the
information if the fate of the flow is a drop or not is already present
in the flow. Due to this, drop queues can be fully mapped on regular
queues.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This start a series to re-work the flow engine in mlx5 to easily support
flow conversion to Verbs or TC. This is necessary to handle both regular
flows and representors flows.
As the full file needs to be clean-up to re-write all items/actions
processing, this patch starts to disable the regular code and only let the
PMD to start in isolated mode.
After this patch flow API will not be usable.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Prior to this patch, all port representors detected on a given device were
probed and Ethernet devices instantiated for each of them.
This patch adds support for the standard "representor" parameter, which
implies that port representors are not probed by default anymore, except
for the list provided through device arguments.
(Patch based on prior work from Yuanhan Liu)
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
Port representors are probed in whatever unspecified order
ibv_get_device_list() returns them.
This is counterintuitive to users since DPDK port IDs assignment almost
never follows the same sequence as representor IDs. Additionally, the
master device does not necessarily inherit the lowest DPDK port ID.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Probe existing port representors in addition to their master device and
associate them automatically.
To avoid collision between Ethernet devices, they are named as follows:
- "{DBDF}" for master/switch devices.
- "{DBDF}_representor_{rep}" with "rep" starting from 0 for port
representors.
(Patch based on prior work from Yuanhan Liu)
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
The current PCI probing method is not aware of Verbs port representors,
which appear as standard Verbs devices bound to the same PCI address and
cannot be distinguished.
Problem is that more often than not, the wrong Verbs device is used,
resulting in unexpected traffic.
This patch makes the driver discard representors to only use the master
device. If unable to identify it (e.g. kernel drivers not recent enough),
either:
- There is only one matching device which isn't identified as a
representor, in that case use it.
- Otherwise log an error and do not probe the device.
(Patch based on prior work from Yuanhan Liu)
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
Since commit "net/mlx5: drop useless support for several Verbs ports"
removed an inner loop, mlx5_dev_spawn() is left with an unnecessary indent
level.
This patch eliminates a block, moves its local variables to function scope,
and re-indents its contents (diff best viewed with --ignore-all-space).
No functional impact.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
All the generic probing code needs is an IB device. While this device is
currently supplied by a PCI lookup, other methods will be added soon.
This patch divides the original function, which has become huge over time,
as follows:
1. PCI-specific (mlx5_pci_probe()).
2. Verbs device (mlx5_dev_spawn()).
(Patch based on prior work from Yuanhan Liu)
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
Unlike mlx4 from which this capability was inherited, mlx5 devices expose
exactly one Verbs port per PCI bus address. Each physical port gets
assigned its own bus address with a single Verbs port.
While harmless, this code requires an extra loop that would get in the way
of subsequent refactoring.
No functional impact.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch gets rid of redundant calls to open the device and query its
attributes in order to simplify the code.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
There are several attribute objects in this function:
- IB device attributes (struct ibv_device_attr_ex device_attr).
- Direct Verbs attributes (struct mlx5dv_context attrs_out).
- Port attributes (struct ibv_port_attr).
- IB device attributes again (struct ibv_device_attr_ex device_attr_ex).
"attrs_out" is both odd and initialized using a nonstandard syntax. Rename
it "dv_attr" for consistency.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Xueming Li <xuemingl@mellanox.com>
Compilation issue:
test/test/test_power_acpi_cpufreq.c:556:31:
error: format ‘%lx’ expects argument of type ‘long unsigned int’,
but argument 2 has type ‘uint64_t {aka long long unsigned int}’
printf("ACPI: Capabilities %lx\n", caps.capabilities);
~~^ ~~~~~~~~~~~~~~~~~
%llx
Fixes: 39e38d5830 ("test/power: add unit test for get capabilities API")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Add rte_flow_expand_rss in map file and tag it as experimental.
Fixes: 4ed05fcd44 ("ethdev: add flow API to expand RSS flows")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Implement the final piece of the in-memory mode puzzle - enable running
DPDK entirely in memory, without creating any files.
To do it, use mmap with MAP_HUGETLB and size flags to enable DPDK to work
without hugetlbfs mountpoints. In order to enable this, a few things needed
to be changed.
First of all, we need to allow empty hugetlbfs mountpoints in
hugepage_info, and handle them correctly (by not trying to create any
files and lock any directories).
Next, we need to reorder the mapping sequence, because the page is not
really allocated until the page fault, and we cannot get its IOVA
address before we trigger the page fault.
Finally, decide at compile time whether we are going to be supporting
anonymous hugepages or not, because we cannot check for it at runtime.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
This command-line option will cause DPDK to operate entirely in
memory and not create any shared files at runtime, including any
shared configuration or hugetlbfs files. This is useful for debug
purposes, as well as for certain use cases like containers or
automatic memory cleanup.
Currently, this option acts as a strict superset of --no-shconf and
--huge-unlink commands.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Unlink hugepages after creating them, to honor the hugepage-unlink mode.
We cannot resize non-existing files, so make single file segments
explicitly unsupported.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Now that the rest of the EAL is adjusted to not create any shared
files, prevent runtime directory from ever being created.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Do not create any shared hugepage size info files if we were
asked to not create any shared files.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
IPC is an inter-process communication mechanism. Since no secondaries
can ever be expected to run in no-shconf mode, IPC will be useless, so
do not enable it in the first place. In the interests of API usage
convenience, we will still allow registering callbacks, but obviously
they won't ever be triggered.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>