In test_sched, we are missing NULL pointer checks after create_mempool()
and rte_pktmbuf_alloc(). Add in these checks using TEST_ASSERT_NOT_NULL macros.
VERIFY macro was removed and replaced by standard test ASSERTS from "test.h" header.
This provides additional information to track when the failure occurred.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Following commit c07691ae1089, an implicit change has been done in the
devargs API.
This triggers problem in virtual pmds that did not check for parameters
validity as it was implicitely valid.
Fix this by restoring the empty argument as "" and add a note in the api.
Restore associated tests.
Fixes: c07691ae1089 ("devargs: remove limit on parameters length")
Reported-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Tested-by: Tetsuya Mukawa <mukawa@igel.co.jp>
The 'callbacks' member of the rte_eth_dev structure has been renamed
to 'link_intr_cbs' to make it clear that it refers to callbacks from
NIC interrupts. This allows us to add other types of callbacks to
the structure without ambiguity.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch removes all references to RTE_MBUF_REFCNT, setting the refcnt
field in the mbuf struct permanently.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Since rte_hash_crc() can now be run regardless of SSE4.2 support,
we can safely remove compile checks for RTE_MACHINE_CPUFLAG_SSE4_2
in test utilities.
Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch removes the flexbytes_offset from rte_fdir_conf, because
the flexible payload setting is done by flex_conf instead of flexbytes_offset.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Added 4 unit tests checking link bonding mode 6 behavior.
Also modified virtual_pmd so it is possible to provide packets,
that should be received with rx_burst and to inspect packets
transmitted by tx_burst.
In packet_burst_generator.c function creating eth_header is
modified, so it accepts ether_type as a parameter and function
creating arp_header is added. Updated other unit tests to get
rid of compilation errors.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch modify mode older name from
BONDING_MODE_ADAPTIVE_TRANSMIT_LOAD_BALANCING to BONDING_MODE_TLB
This patch also changes order of TEST_ASSERT macro in
test_tlb_verify_slave_link_status_change_failover.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch links test application against librte_pmd_ring.so for shared
libraries. It's required as long as librte_pmd_ring provides some additional
routines used for testing purposes and must be "hard-linked".
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch adds unit tests for mode 4. It is split into separate
file to avoid problems with other modes that does not need to
look into packets payload.
This patch includes also a modification of maximum number of ports
used in their tests for bonding modes 0-3 from 16 to 6.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Adding new reorder unit test for the test app.
The command to run the unit test from the test shell is: reorder_autotest
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Add missing free for devargs->args and fix tests.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The Link bonding library is incorrectly using receive packet type flags
in the transmit policy hashing functions, which would cause packets
generated locally to be incorrectly distributed across the slave
devices. This patch completely removes the dependency on the packet
type flags and uses the ether_type from either the Ethernet header or
the VLAN headers for branching.
This patch also includes the associate changes in the test suite and in
the packet_burst_generator code to remove the dependences on the packet
type flags.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Make sure that test_acl would not ignore error conditions.
Run classify() with all possible values.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch contains a fix for link bonding handling of vlan tagged packets in mode 3 and 5.
Currently xmit_slave_hash function misinterprets the PKT_RX_VLAN_PKT flag to mean that
there is a vlan tag within the packet when in actually means that there is a valid entry
in the vlan_tci field in the mbuf.
- Fixed VLAN tag support in hashing functions.
- Adds support for TCP in layer 4 header hashing.
- Splits transmit hashing function into separate functions for each policy to
reduce branching and to make the code clearer.
- Fixed incorrect flag set in test application packet generator.
Test report: http://dpdk.org/ml/archives/dev/2015-January/010792.html
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SunX Jiajia <sunx.jiajia@intel.com>
One occurrence call to strncmp had the closing brace in the wrong
place. Changing this form:
if (strncmp(X, Y, sizeof(X) != 0))
which does a comparison of length 1, to
if (strncmp(X, Y, sizeof(X)) != 0)
which does the correct length comparison and then compares the result
to zero in the "if" part.
Seen with clang-3.5:
"error: size argument in 'strncmp' call is a comparison"
This patch is similar to 261386248 but it looks that one occurrence
was forgotten.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
One of the test assertion macros was missing the "do" part of the
do-while. This issue was picked up by clang reporting an empty while
loop body for the closing while of the do-while pair.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
If mbuf allocation failed for whatever reason, we would get a NULL
pointer exception in test_table_acl.c:test_pipeline_single_filter test
case.
We fix this by causing an early break out of the application loop. If we
quit the test immediately we would leak any existing allocated mbufs,
but by breaking instead, we allow the test to continue and clean up the
mbufs already in the pipeline, while still having a test failure as the
mbuf counts should not match.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
In the kvargs test cases, we were checking for errors by checking if the
returned pointer value was NULL. In the error handling, we then tried to
free back the NULL pointer, which would cause a crash.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Since commit a155d4301 "support link bonding device initialization",
EAL probes drivers to the PCI devices in rte_eal_init,
then PCI resources are mapped if a device
is bound to igb_uio driver, for instance.
Therefore, test app probes all the devices and multiprocess unit test
tries to map resources twice in the secondary processes, and test fails,
caused by RTE_PCI_DRV_NEEDED_MAPPING flag in dummy pci driver my_driver2.
Test is fixed by setting the driver flags to 0.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Since commit b91c67e5a693211862aa7dc3b78630b4e856c2af,
maximum number of cores is 128, which has increase
the total memory necessary for a rte_mempool structure,
as the per-lcore local cache has been doubled in size.
Therefore, eal_flags unit test was broken since it needed
to use more hugepages.
Increased memory to 18MB, as that is the actual minimum memory necessary
(depending on the physical memory segments, DPDK may need less memory)
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adding call to mac_address_slaves_update from the lsc handler when the
first slave become active to propagate any mac changes made while
devices are inactive
Changed removing slave logic to use memmove instead of memcpy to move
data within the same array, as this was corrupting the slave array.
Adding unit test to cover failing assignment scenarios
Test report: http://dpdk.org/ml/archives/dev/2014-December/009623.html
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SunX Jiajia <sunx.jiajia@intel.com>
When using test-pmd with flow director in FreeBSD, the application will
segfault/Bus error while parsing the command-line. This is due to how
each commands result structure is represented during parsing, where the offsets
for each tokens value is stored in a character array(char result_buf[BUFSIZ])
in cmdline_parse()(./lib/librte_cmdline/cmdline_parse.c).
The overflow occurs where BUFSIZ is less than the size of a commands result
structure, in this case "struct cmd_pkt_filter_result"
(app/test-pmd/cmdline.c) is 1088 bytes and BUFSIZ on FreeBSD is 1024 bytes as
opposed to 8192 bytes on Linux.
The problem can be reproduced by running test-pmd on FreeBSD:
./testpmd -c 0x3 -n 4 -- -i --portmask=0x3 --pkt-filter-mode=perfect
And adding a filter:
add_perfect_filter 0 udp src 192.168.0.0 1024 dst 192.168.0.0 1024 flexbytes
0x800 vlan 0 queue 0 soft 0x17
This patch removes the OS dependency on BUFSIZ and defines and uses a
library #define CMDLINE_PARSE_RESULT_BUFSIZE 8192
Added boundary checking to ensure this buffer size cannot overflow, with
an error message being produced.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
http://git.droids-corp.org/?p=libcmdline.git;a=commitdiff;h=b1d5b169352e57df3fc14c51ffad4b83f3e5613f
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
This Patch add unit tests for mode 5 - tlb - to the oders
link bonding unit tests.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
CACHE_LINE_SIZE is a macro defined in machine/param.h in FreeBSD and
conflicts with DPDK macro version.
Adding RTE_ prefix to avoid conflicts.
CACHE_LINE_MASK and CACHE_LINE_ROUNDUP are also prefixed.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
[Thomas: updated on HEAD, including PPC]
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Curent implementation in test_memzone.c has bugs in finding the
second smallest memory segment. It's the last smallest memory segment,
but it's not the second smallest memory segment. This bug may cause test
failure in some cases. This patch fixes this bug.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
IBM Power architecture has different huge page sizes (16MB, 16GB) than
x86.This patch defines RTE_PGSIZE_16M and RTE_PGSIZE_16G in the
rte_page_sizes enum variable and adds huge page size support of DPDK
for IBM Power architecture.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
IBM Power architecture has different cache line size (128 bytes) than
x86 (64 bytes). This patch defines CACHE_LINE_SIZE to 128 bytes to
override the default value 64 bytes to support IBM Power Architecture.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
IBM Power processor doesn't have CPU flag hardware registers. This patch
uses aux vector software register to get CPU flags and add CPU flag
checking support for IBM Power architecture.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Updated the unit tests to cover both librte_power implementations as well as
the external API.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Enable users to specify the lcore id that is used as master lcore.
Signed-off-by: Simon Kuenzer <simon.kuenzer@neclab.eu>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In current version, used cores can only be specified using a bitmask.
It will now be possible to specify cores in 2 different ways:
- Using a bitmask (-c [0x]nnn): bitmask must be in hex format
- Using a list in following format: -l <c1>[-c2][,c3[-c4],...]
The letter -l can stand for lcore or list.
-l 0-7,16-23,31 being equivalent to -c 0x80FF00FF
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
No need to have different headers for Linux and BSD.
These files are identicals with exception of internal config which has
uio and vfio fields only useful for Linux.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Adding support for lsc interrupt from bonded device to link
bonding library with supporting unit tests in the test application.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: SunX Jiajia <sunx.jiajia@intel.com>
This patch fixes two occurrences where a call to strncmp had the closing
brace in the wrong place. Changing this form:
if (strncmp(X,Y,sizeof(X) != 0))
which does a comparison of length 1, to
if (strncmp(X,Y,sizeof(X)) != 0)
which does the correct length comparison and then compares the result to
zero in the "if" part, as the author presumably originally intended.
Reported-by: Larry Wang <liang-min.wang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
eal_flags and multiprocess unit tests use --file-prefix option
which is not supported in FreeBSD, so it has been removed
if compiled for this OS.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This field is added for librte_distributor. User of librte_distributor
is advocated to set value of mbuf->hash.usr before calling
rte_distributor_process. The value of usr is the tag which stands as
identifier of flow.
Signed-off-by: Qinglai Xiao <jigsaw@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The unit test can be used to measure cycles per packet in different rx/tx routines.
The NIC works in loopback mode. So it doesn't require test equipment to measure throughput.
As result, the unit test shows the average cycles per packet consuming.
When doing the test, make sure the link is UP.
Usage Example:
1. Run unit test app in interactive mode
app/test -c f -n 4 -- -i
2. Run and wait for the result
pmd_perf_autotest
There's option to choose rx/tx pair, default is vector.
set_rxtx_mode [vector|scalar|full|hybrid]
Note: To get acurate scalar fast, please choose 'vector' or 'hybrid' without INC_VEC=y in config
It supports to measure standalone rx or tx.
Usage Example:
Choose rx or tx standalone, default is both
set_rxtx_anchor [rxtx|rxonly|txonly]
It also supports to measure standalone RX burst cycles.
In this way, it won't repeat re-send received packets.
Now it measures two situations, poll before/after xmit(w or w/o desc. cache conflict)
Usage Example:
Set stream control mode, by default is continuous
set_rxtx_sc [continuous|poll_before_xmit|poll_after_xmit]
Test report: http://dpdk.org/ml/archives/dev/2014-October/007145.html
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Add support to allow packet burst generator to create packets
in different sizes.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Since commit a155d430119 ("support link bonding device initialization"),
rte_eal_pci_probe() is called in rte_eal_init().
pci_autotest called it to bind devices to the test_driver and test_driver2.
Therefore, the function is called twice and devices already allocated
will cause the test fail.
This patch solves that issue, unregistering all previous drivers before
calling rte_eal_pci_probe() for the first time, so DPDK does not try
to allocate data for the devices, binding them to their previous
drivers again.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
As a result of moving tailq's into local memory, some tailq data
is now reserved in rte_malloc heaps (because it needs to be
shared across DPDK processes). The first thing DPDK initializes
is a log mempool, and since it creates a tailq, it reserves
space in rte_malloc heap before allocating the mempool itself.
By default, rte_malloc allocates way more space than is necessary,
so under some conditions (namely, overall memory available is low)
this results in malloc heap eating up so much memory that log
mempool is not able to allocate its memzone.
This patch fixes the unit tests to account for that change.
Reported-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Link bonding broadcast mode requires refcnt parameter in the mbuf struct to
allow efficient transmission of duplicated mbufs on slave ports.
This patch disables broadcast mode when the complication option RTE_MBUF_REFCNT
is disabled to allow clean building of the bonding library.
A warning message notify user of disabling of broadcast mode.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The previous implementation of rte_kni_alloc() was allocating memzones with a
name composed of a fixed string and the interface name. When an application was
allocating and deallocating multiple interfaces with different names, memzones
were quickly exhausted, even though memzones from deallocated interfaces were
never used anymore (unless an interface with the same name was re-allocated).
As a result, the application was unable to allocate more KNI interfaces with
different names.
This patch implements the KNI memzone pool in order to prevent memzone
exhaustion when allocating/deallocating KNI interfaces. It adds a new API call,
rte_kni_init(max_kni_ifaces) that shall be called before any call to
rte_kni_alloc() if KNI is used. The memzones are pre-allocated with interface-
independent names so that they can be reused.
Signed-off-by: Marc Sune <marc.sune@bisdn.de>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The four-byte-key (fbk) autotest was allocating the keys to be used for
the test on the stack. When the number of entries in the table was
increased significantly, for example, to test larger hashes by increase the
value of ENTRIES, this array of keys was greater than that
allowed on the stack, and so caused problems, i.e. crashes and core dumps.
The solution is to have the keys dynamically allocated on the heap using
malloc. Now if ENTRIES is increased and we run out of memory we get an
error message instead of a crash.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
