Change the type of burst mode information from bit field to free string
data, so that each PMD can describe the Rx/Tx busrt functions flexibly.
Fixes: eb5902504a13 ("ethdev: add API for getting burst mode information")
Fixes: 6b6609f68ccd ("net/i40e: support Rx/Tx burst mode info")
Fixes: e9a10e6c2102 ("net/ice: support Rx/Tx burst mode info")
Fixes: 7fe108edcf53 ("app/testpmd: show Rx/Tx burst mode description")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch removes deprecated feature 'Flow Director' from hns3.ini
and hns3_vf.ini because the feature has been removed from the
feature list in the following commit:
Commit 030febb6642c ("doc: remove deprecated ethdev features")
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
A tag is a transient data which can be used during flow match. This can be
used to store match result from a previous table so that the same pattern
need not be matched again on the next table. Even if outer header is
decapsulated on the previous match, the match result can be kept.
Some device expose internal registers of its flow processing pipeline and
those registers are quite useful for stateful connection tracking as it
keeps status of flow matching. Multiple tags are supported by specifying
index.
Example testpmd commands are:
flow create 0 ingress pattern ... / end
actions set_tag index 2 value 0xaa00bb mask 0xffff00ff /
set_tag index 3 value 0x123456 mask 0xffffff /
vxlan_decap / jump group 1 / end
flow create 0 ingress pattern ... / end
actions set_tag index 2 value 0xcc00 mask 0xff00 /
set_tag index 3 value 0x123456 mask 0xffffff /
vxlan_decap / jump group 1 / end
flow create 0 ingress group 1
pattern tag index is 2 value spec 0xaa00bb value mask 0xffff00ff /
eth ... / end
actions ... jump group 2 / end
flow create 0 ingress group 1
pattern tag index is 2 value spec 0xcc00 value mask 0xff00 /
tag index is 3 value spec 0x123456 value mask 0xffffff /
eth ... / end
actions ... / end
flow create 0 ingress group 2
pattern tag index is 3 value spec 0x123456 value mask 0xffffff /
eth ... / end
actions ... / end
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The function rte_eth_dev_count() was marked as deprecated in DPDK 18.05
in commit d9a42a69febf ("ethdev: deprecate port count function").
It was planned to be removed after 19.11 LTS release,
but given we must not break ABI between 19.11 and 20.11,
it is removed now.
Note the ABI version is not dumped in this commit
because other changes already did.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
This commits adds the hairpin get capabilities function.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit introduce hairpin queue type.
The hairpin queue in build from Rx queue binded to Tx queue.
It is used to offload traffic coming from the wire and redirect it back
to the wire.
There are 3 new functions:
- rte_eth_dev_hairpin_capability_get
- rte_eth_rx_hairpin_queue_setup
- rte_eth_tx_hairpin_queue_setup
In order to use the queue, there is a need to create rte_flow
with queue / RSS action that targets one or more of the Rx queues.
Signed-off-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Adding support to parse higig2 header in RTE flow for octeontx2.
And added devargs to configure port for higig2.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding support to configure specific switch types like high2 and dsa
on a port. When this switch type is configured, it is expected that
all the traffic on that port should be of specific type only.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In our testing we have identified a critical FW bug. Performance
is degraded significantly for certain packet sizes with 8.40.25.0 FW.
This patch updates the FW to version 8.40.33.0. The updated FW has a
fix to performance issue.
The patch also adds initialization for FW overlay RAM as part of
hardware initialization which is required by the new FW.
Fixes: 3b307c55f2ac ("net/qede/base: update FW to 8.40.25.0")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Rx queue for LRO is created using DevX. Flows created on this queue
must use the DV flow engine.
This patch adds check of dv_flow_en=1 when configuring LRO support
on device spawn.
Documentation is updated accordingly.
Fixes: 175f1c21d033 ("net/mlx5: check conditions to enable LRO")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The rte_security lib has introduced replay_win_sz,
so it can be removed from the rte_ipsec lib.
The relevant tests, app are also update to reflect
the usages.
Note that esn and anti-replay fileds were earlier used
only for ipsec library, they were enabling the libipsec
by default. With this change esn and anti-replay setting
will not automatically enabled libipsec.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
At present the ipsec xfrom is missing the important step
to configure the anti replay window size.
The newly added field will also help in to enable or disable
the anti replay checking, if available in offload by means
of non-zero or zero value.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
IPSec Multi buffer library supports encryption on multiple segments.
When dealing with chained buffers (multiple segments), as long as
the operation is in-place, the destination buffer does not have to
be contiguous (unlike in the case of out-of-place operation).
Therefore, the limitation of not supporting in-place chained mbuf
can be removed.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Updated AESNI MB and AESNI GCM PMD documentation guides
with information about the latest Intel IPSec Multi-buffer
library supported.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add tests for offload fallback feature; add inbound config modificator
SGW_CFG_XPRM_IN (offload fallback setting can be set only for inbound
SAs). Tests are using cryptodev for outbound SA.
To test fragmentation with QAT set:
MULTI_SEG_TEST="--reassemble=4096 --cryptodev_mask=0x5555"
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Bernard Iremonger <bernard.iremonger@intel.com>
Due to fragment loss on highly saturated links and long fragment
lifetime, ipsec-secgw application quickly runs out of free reassembly
buckets. As a result new fragments are being dropped.
Introduce --frag-ttl option which allow user to lower default fragment
lifetime which solves problem of saturated reassembly buckets with high
bandwidth fragmented traffic.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Inline processing is limited to a specified subset of traffic. It is
often unable to handle more complicated situations, such as fragmented
traffic. When using inline processing such traffic is dropped.
Introduce fallback session for inline crypto processing allowing
handling packets that normally would be dropped. A fallback session is
configured by adding 'fallback' keyword with 'lookaside-none' parameter
to an SA configuration. Only 'inline-crypto-offload" as a primary
session and 'lookaside-none' as a fall-back session combination is
supported by this patch.
Fallback session feature is not available in the legacy mode.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Bernard Iremonger <bernard.iremonger@intel.com>
Ubuntu ships with a patched version of doxygen that enables
HAVE_DOT (disabled by default). Enabling this option causes the warning:
"""
warning: Included by graph for 'rte_common.h' not generated,
too many nodes. Consider increasing DOT_GRAPH_MAX_NODES
"""
This reproduces with doxygen version 1.8.13 and
dot - graphviz version 2.40.1 on Ubuntu 18.04.
This will force doxygen not to assume that dot (part of Graphviz)
is installed, and will result in dot not being used for visualization.
If someone still needs to generate the graphs, the following can
be considered:
- Increase DOT_GRAPH_MAX_NODES to a large value.
- Set HAVE_DOT for more powerful graphs.
- Set DOT_IMAGE_FORMAT=svg to generate svg images.
- Set INTERACTIVE_SVG=YES to allow zooming and panning.
See:
- http://changelogs.ubuntu.com/changelogs/pool/main/d/doxygen/doxygen_1.8.13-10/changelog
- http://www.doxygen.nl/manual/config.html#cfg_have_dot
- https://github.com/doxygen/doxygen/issues/7345
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The original patch used incorrect subnet range for testing.
Fixes: 37afe381bde4 ("examples/l3fwd: use reserved IP addresses")
Cc: stable@dpdk.org
Reported-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds an option to enable link time optimization. In addition
to LTO option itself (-flto) fat-lto-objects are being used. This is
because during the build pmdinfogen scans the generated ELF objects to
find this_pmd_name* symbol in symbol table. Without fat-lto-objects gcc
produces ELF only with extra symbols for internal use during linking.
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Every implementation of a particular version of given symbol needs to be
marked in its declaration as such (using `__vsym` macro). This patch
fixes this and also clarifies the documentation about that.
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch fixes documentation of versioning macros so that they are
aligned with their implementation (no underscore is added by macros).
Fixes: f1ef9794f9bd ("doc: add ABI guidelines")
Cc: stable@dpdk.org
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The rte_vfio_dma_map/unmap API's have been marked as deprecated in
release 19.05. Remove them.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch bump the supported SDK and MC firmware version
to the latest.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
dpaa and dpaa2 config have evolved to be same. The same binary
can now work across the platforms. So, there is no need to maintain
two different build configs.
The dpaa config shall work for both generation of dpaa platforms.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When populating a mempool, ensure that objects are not located across
several pages, except if user did not request IOVA-contiguous objects.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add FIB (Forwarding Information Base) library. This library
implements a dataplane structures and algorithms designed for
fast longest prefix match.
Internally it consists of two parts - RIB (control plane ops) and
implementation for the dataplane tasks.
Initial version provides two implementations for both IPv4 and IPv6:
dummy (uses RIB as a dataplane) and DIR24_8 (same as current LPM)
Due to proposed design it allows to extend FIB with new algorithms
in future (for example DXR, poptrie, etc).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Add RIB (Routing Information Base) library. This library
implements an IPv4 routing table optimized for control plane
operations. It implements a control plane struct containing routes
in a tree and provides fast add/del operations for routes.
Also it allows to perform fast subtree traversals
(i.e. retrieve existing subroutes for a given prefix).
This structure will be used as a control plane helper structure
for FIB implementation. Also it might be used standalone in other
different places such as bitmaps for example.
Internal implementation is level compressed binary trie.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Documentation includes separate pages of EAL command-line options for
Linux and for FreeBSD.
Links to these pages use the same text 'EAL parameters', so it is not
clear which link to use for which environment.
This patch adds the text '(Linux)' and '(FreeBSD)' where relevant, to
clearly identify the links.
Fixes: 3ee567cfec37 ("doc: document all EAL parameters in one place")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The ether header does not need to be packed since that makes no sense for
structures with only bytes in them, but it should be aligned to a two-byte
boundary to simplify access to it from code. Other packed structures that
use this also need to be updated to take account of the change, either by
removing packing - where it is clearly unneeded - or by explicitly giving
those structures 2-byte alignment also.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Added guide for IOAT sample app usage and code description.
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Any file with ABI versioned functions needs different macros for shared and
static builds, so we need to accommodate that. Rather than building
everything twice, we just flag to the build system which libraries need
that handling, by setting use_function_versioning in the meson.build files.
To ensure we don't get silent errors at build time due to this meson flag
being missed, we add an explicit error to the function versioning header
file if a known C macro is not defined. Since "make" builds always only
build one of shared or static libraries, this define can be always set, and
so is added to the global CFLAGS. For meson, the build flag - and therefore
the C define - is set for the three libraries that need the function
versioning: "distributor", "lpm" and "timer".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Andrzej Ostruszka <amo@semihalf.com>
Reviewed-by: Andrzej Ostruszka <amo@semihalf.com>
The compat.h header file provided macros for two purposes:
1. it provided the macros for marking functions as rte_experimental
2. it provided the macros for doing function versioning
Although these were in the same file, #1 is something that is for use by
public header files, which #2 is for internal use only. Therefore, we can
split these into two headers, keeping #1 in rte_compat.h and #2 in a new
file rte_function_versioning.h. For "make" builds, since internal objects
pick up the headers from the "include/" folder, we need to add the new
header to the installation list, but for "meson" builds it does not need to
be installed as it's not for public use.
The rework also serves to allow the use of the function versioning macros
to files that actually need them, so the use of experimental functions does
not need including of the versioning code.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Andrzej Ostruszka <amo@semihalf.com>
New accessor has been introduced to provide the hidden information.
This symbol can now be kept internal.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Now that all elements of the rte_config structure have (deinlined)
accessors, we can hide it.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Those functions have been deprecated since 17.11 and have 1:1
replacement.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Let's avoid exporting structures without an identified usecase.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Remove rte_malloc_virt2phy as announced previously.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Remove rte_cpu_check_supported as announced previously.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The internal structure of lcore_config does not need to be part of
visible API/ABI. Make it private to EAL.
Rearrange the structure so it takes less memory (and cache footprint).
Since we change the ABI, bump the library version.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This example can be removed because DPDK now has a range
of libraries, especially rte_eventdev, that did not exist
previously for load balancing, making this less relevant.
Also, modern NIC cards have greater ability to do load balancing,
e.g. using RSS, over a wider range of fields than earlier cards did.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Rather than providing a shim layer on top of netmap,
we should instead encourage users to create apps using
the DPDK APIs directly.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Original DPDK rings code had explicit support for a
single watermark per-ring, but more recent releases of
DPDK had a more general mechanism where each enqueue
or dequeue call could return the remaining elements/free-slots
in the ring.
Therefore, this example is not as relevant as before and can be removed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The main l3fwd app should work with both PF and VF devices, so remove the
VF-only l3fwd example.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The example app shows the use of TUN/TAP with DPDK, but DPDK has a built-in
TAP PMD, so this example is obsolete and so can be removed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The table of examples in the sample application guide is now removed,
as it was unnecessary and difficult to update when adding/removing
examples.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
In some scenarios, the raw_encap/raw_decap actions could be multiple in
one single flow (e,g. hirepin flow):
... actions raw_decap / raw_encap / raw_decap / raw_encap / ...
This requires the testpmd supports multiple raw_encap/raw_decap data
settings as well.
With the multiple raw_encap/raw_decap settings, the testpmd commands –
set raw_encap / set raw_decap will become:
set raw_encap <index> <item pattern>
set raw_decap <index> <item pattern>
And the actions – raw_encap/raw_decap also could optionally choose which
global raw_encap/raw_decap confs to be used by index:
... actions raw_decap index 1 / raw_encap index 2 / ...
If there is no `index` specified, the default index is 0:
set raw_encap <item pattern>
... actions raw_decap / raw_encap / ...
which will use raw_encap index 0.
In addition to the set raw_encap/raw_decap commands,
show <raw_encap/raw_decap> <index>
show <raw_encap/raw_decap> all
are also introduced into in order to check which index is set and to
what.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
This example is too old and SPDK will not maintain this example
anymore. Also SPDK has submitted a new vhost example vhost-blk.
We will keep on maintaining vhost-blk and It shows the packed
ring and live recovery support.
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
