The driver setting of "allow_experimental_apis" was not being used when
building the base code. To allow this we can manually put in a check
in the base code files for the setting and set the appropriate cflag
if it's needed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Ilya Maximets <i.maximets@samsung.com>
This feature is used to offload stripping of VLAN header from received
packets and update vlan_tci field in mbuf when
DEV_RX_OFFLOAD_VLAN_STRIP & ETH_VLAN_STRIP_MASK flag is set.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This feature is used to create a hole between HEADROOM
and actual data.Size of hole is specified in bytes as
module param to pmd
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
thunderx pmd driver passes dev_info.max_rx_pktlen as
9200 (via rte_eth_dev_info_get()) to application.
But, when application tries to set MTU as
(9200 - sizeof(ethernet_header_t)) the operation fails
because of missing CRC and VLAN additions.
This patch fixes the following for thunderx pmd driver:
- Sets NIC_HW_MAX_FRS to 9216 (instead of 9200)
- Sets NIC_HW_MAX_MTU to 9190 (NIC_HW_MAX_FRS - ETH_HLEN
- ETHER_CRC_LEN - 2*VLAN_HLEN)
- Sets dev_info->max_rx_pkt_len to NIC_HW_MAX_MTU +
ETH_HLEN (instead of 9200)
- Allows rte_eth_dev_set_mtu() to pass if application
(like VPP) calls rte_eth_dev_set_mtu() before
rte_eth_dev_start() by putting appropriate check for
dev->data->dev_started
Fixes: 65d9804edc ("net/thunderx: support MTU configuration")
Cc: stable@dpdk.org
Signed-off-by: Nitin Saxena <nitin.saxena@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
cq_limit field is added in cn88xx-pass2 and subsequent
versions. Reflect the change in the sq_config structure.
This change is backward compatible as the old pass versions
ignore this field.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Used rte_log2_u32() to replace integer log2() to
remove libm dependency.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Replace the incorrect reference to "Cavium Networks", "Cavium Ltd"
company name with correct the "Cavium, Inc" company name in
copyright headers.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Replaced usage of %a0 in inline assembly with [%x0]
Signed-off-by: Ashwin Sekhar T K <ashwin.sekhar@caviumnetworks.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The base code was using native GCC macros
for endian detection. Change to portable
rte_byteorder.h based endian detection.
Fixes: 262d43fe20 ("net/thunderx/base: add HW register definitions")
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
- bgx_link_status mbox definition was changed in Linux
commit 1cc702591bae ("net: thunderx: Add ethtool support")
- NIC_MBOX_MSG_RES_BIT related changes were never part of Linux PF driver
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
SIMPLEQ_* operations are not available in FreeBSD. Replacing
with equivalent STAILQ_* operations.
Fixes: f2546f8e51 ("net/thunderx/base: add functions to store qsets")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix portability
issues across different architectures.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
83xx NIC subsystem differs in new PCI subsystem_device_id and
NICVF_CAP_DISABLE_APAD capability.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Based on the packet type(IPv4 or IPv6), the nicvf HW aligns
L3 data to the 64bit memory address.
The alignment creates a hole in mbuf(between the
end of headroom and packet data start).
The new revision of the HW provides an option to disable
the L3 alignment feature and make mbuf layout looks
more like other NICs. For better application compatibility,
disabling l3 alignment feature on the hardware revisions it supports.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Changes:
- add new message sqs_alloc in mailbox
- add a queue container to hold secondary qsets.
- add nicvf_mbox_request_sqs
- handle new mailbox messages for secondary queue set support
- register secondary queue sets for further reuse
- register the number secondary queue sets in MSG_QS_CFG
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This interface (nicvf_bsvf) will be used for secondary queue set support.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
81xx NIC subsystem differs in new PCI subsystem_device_id and
NICVF_CAP_CQE_RX2 capability.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Certain thunderx SoC pass has additional optional word
in Rx descriptor to hold tunneling extension info.
Based on this capability, the location where packet pointer
address stored in Rx descriptor will vary.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
thunderx pmd driver needs to support multiple SoC
variants in ThunderX family.
Remove generic pass references from driver as each SoC
can have same pass number.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Allocate maximum supported hardware ring hardware descriptors
memory on the first rte_eth_dma_zone_reserve call in order to
get sufficient hardware ring buffer space on subsequent queue
setup request with different queue size.
Fixes: aa0d976e50 ("net/thunderx: add Rx queue setup and release")
Fixes: 3f3c6f9724 ("net/thunderx: add Tx queue setup and release")
Fixes: 7413feee66 ("net/thunderx: add device start/stop and close")
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Fix the following error with clang
error: unused function 'nicvf_mbox_msg_str'
The function nicvf_mbox_msg_str() may be unused, based on DEBUG
compilation option selected. Mark __attribute__((unused)) on
this function, to inform compiler that this function may be unused
Fixes: 966e225c23 ("net/thunderx/base: add mailbox for PF/VF communication")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
