This patch implements interrupt enable/disable functions for each
Rx queue. And we rely on flags of avail queue as the hint for virtio
device to interrupt virtio driver or not.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add handler in virtio_pci_ops to set queue/irq bind.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Under interrupt mode, rx_descriptor_done is used as an indicator
for applications to check if some number of packets are ready to
be received.
This patch enables this by checking used ring's local consumed idx
with shared (with backend) idx.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
We need to define a prototype for such wrapper, which makes thing
too complicated. Remove wrapper and call set_config_irq directly.
Suggested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The LSC flag is decided according to if VIRTIO_NET_F_STATUS feature
is negotiated. Copy the PCI info after the judgement will rewrite
the correct result.
Fixes: 198ab33677 ("net/virtio: move device initialization in a function")
CC: stable@dpdk.org
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
With vhost kernel, to enable multiqueue, we need backend device
in kernel support multiqueue feature. Specifically, with tap
as the backend, as linux/Documentation/networking/tuntap.txt shows,
we check if tap supports IFF_MULTI_QUEUE feature.
And for vhost kernel, each queue pair has a vhost fd, and with a tap
fd binding this vhost fd. All tap fds are set with the same tap
interface name.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
When used with vhost kernel backend, we can offload at both directions.
- From vhost kernel to virtio_user, the offload is enabled so that
DPDK app can trust the flow is checksum-correct; and if DPDK app
sends it through another port, the checksum needs to be
recalculated or offloaded. It also applies to TSO.
- From virtio_user to vhost_kernel, the offload is enabled so that
kernel can trust the flow is L4-checksum-correct, no need to verify
it; if kernel will consume it, DPDK app should make sure the
l3-checksum is correctly set.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch add support vhost kernel as the backend for virtio_user.
Three main hook functions are added:
- vhost_kernel_setup() to open char device, each vq pair needs one
vhostfd;
- vhost_kernel_ioctl() to communicate control messages with vhost
kernel module;
- vhost_kernel_enable_queue_pair() to open tap device and set it
as the backend of corresonding vhost fd (that is to say, vq pair).
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add a struct virtio_user_backend_ops to abstract three kinds of backend
operations:
- setup, create the unix socket connection;
- send_request, sync messages with backend;
- enable_qp, enable some queue pair.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
To support vhost kernel as the backend of net_virtio_user in coming
patches, we move vhost_user specific structs and macros into
vhost_user.c, and only keep common definitions in vhost.h.
Besides, remove VHOST_USER_MQ feature check.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
virtio_user is not properly reset when users call vtpci_reset(),
as it ignores VIRTIO_CONFIG_STATUS_RESET status in
virtio_user_set_status().
This might lead to initialization failure as it starts to re-init
the device before sending RESET messege to backend. Besides, previous
callfds and kickfds are not closed.
To fix it, we add support to disable virtqueues when it's set to
DRIVER OK status, and re-init fields in struct virtio_user_dev.
Fixes: e9efa4d938 ("net/virtio-user: add new virtual PCI driver")
Fixes: 37a7eb2ae8 ("net/virtio-user: add device emulation layer")
Cc: stable@dpdk.org
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Before the commit 86d59b2146 ("net/virtio: support LRO"), features
in virtio PMD, is decided and properly set at device initialization
and will not be changed. But afterward, features could be changed in
virtio_dev_configure(), and will be re-negotiated if it's changed.
In virtio-user, device features is obtained at driver probe phase
only once, but we did not store it. So the added feature bits in
re-negotiation will fail.
To fix it, we store it down, and will be used to feature negotiation
either at device initialization phase or device configure phase.
Fixes: e9efa4d938 ("net/virtio-user: add new virtual PCI driver")
Cc: stable@dpdk.org
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
hw->dev, a pointer to pci_dev, was actually not used, until the
refactor of decouping from PCI device. This would somehow break
the multiple process again, since "hw" is stored at shared memory,
while "pci_dev" is not: the primary and secondary process could
have different address for it, while just one value is allowed.
Thus we should not store it to "hw", instead, we could retrieve
it from the "eth_dev->device" field.
Fixes: ae34410a8a ("ethdev: move info filling of PCI into drivers")
Fixes: eac901ce29 ("ethdev: decouple from PCI device")
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Since commit 0e1b45a284 ("ethdev: decouple interrupt handling from
PCI device"), intr_handle is stored at eth_dev struct, that we could
use it directly. Thus there is no need to get it from hw.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The introduce of virtio 1.0 support brings yet another set of ops, badly,
it's not handled correctly, that it breaks the multiple process support.
The issue is the data/function pointer may vary from different processes,
and the old used to do one time set (for primary process only). That
said, the function pointer the secondary process saw is actually from the
primary process space. Accessing it could likely result to a crash.
Kudos to the last patches, we now be able to maintain those info that may
vary among different process locally, meaning every process could have its
own copy for each of them, with the correct value set. And this is what
this patch does:
- remap the PCI (IO port for legacy device and memory map for modern
device)
- set vtpci_ops correctly
After that, multiple process would work like a charm. (At least, it
passed my fuzzy test)
Fixes: b8f04520ad ("virtio: use PCI ioport API")
Fixes: d5bbeefca8 ("virtio: introduce PCI implementation structure")
Fixes: 6ba1f63b5a ("virtio: support specification 1.0")
Cc: stable@dpdk.org
Reported-by: Juho Snellman <jsnell@iki.fi>
Reported-by: Yaron Illouz <yaroni@radcom.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Like vtpci_ops, the rte_pci_ioport has to store in local memory. This
is basically for the rte_pci_device field is allocated from process
local memory, but not from shared memory.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
We used to store the vtpci_ops at virtio_hw structure. The struct,
however, is stored in shared memory. That means only one value is
allowed. For the multiple process model, however, the address of
vtpci_ops should be different among different processes.
Take virtio PMD as example, the vtpci_ops is set by the primary
process, based on its own process space. If we access that address
from the secondary process, that would be an illegal memory access,
A crash then might happen.
To make the multiple process model work, we need store the vtpci_ops
in local memory but not in a shared memory. This is what the patch
does: a local virtio_hw_internal array of size RTE_MAX_ETHPORTS is
allocated. This new structure is used to store all these kind of
info in a non-shared memory. Current, we have:
- vtpci_ops
- rte_pci_ioport
- virtio pci mapped memory, such as common_cfg.
The later two will be done in coming patches. Later patches would also
set them correctly for secondary process, so that the multiple process
model could work.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
If the primary enables the vector Rx/Tx path, the current code would
let the secondary always choose the non vector Rx/Tx path. This results
to a Rx/Tx method mismatch between primary and secondary process. Werid
errors then may happen, something like:
PMD: virtio_xmit_pkts() tx: virtqueue_enqueue error: -14
Fix it by choosing the correct Rx/Tx callbacks for the secondary process.
That is, use vector path if it's given.
Fixes: 8d8393fb18 ("virtio: pick simple Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Assume we have two virtio ports, 00:03.0 and 00:04.0. The first one is
managed by the kernel driver, while the later one is managed by DPDK.
Now we start the primary process. 00:03.0 will be skipped by DPDK virtio
PMD driver (since it's being used by the kernel). 00:04.0 would be
successfully initiated by DPDK virtio PMD (if nothing abnormal happens).
After that, we would get a port id 0, and all the related info needed
by virtio (virtio_hw) is stored at rte_eth_dev_data[0].
Then we start the secondary process. As usual, 00:03.0 will be firstly
probed. It firstly tries to get a local eth_dev structure for it (by
rte_eth_dev_allocate):
port_id = rte_eth_dev_find_free_port();
...
eth_dev = &rte_eth_devices[port_id];
eth_dev->data = &rte_eth_dev_data[port_id];
...
return eth_dev;
Since it's a first PCI device, port_id will be 0. eth_dev->data would
then point to rte_eth_dev_data[0]. And here things start going wrong,
as rte_eth_dev_data[0] actually stores the virtio_hw for 00:04.0.
That said, in the secondary process, DPDK will continue to drive PCI
device 00.03.0 (despite the fact it's been managed by kernel), with
the info from PCI device 00:04.0. Which is wrong.
The fix is to attach the port already registered by the primary process.
That is, iterate the rte_eth_dev_data[], and get the port id who's PCI
ID matches the current PCI device.
This would let us maintain same port ID for the same PCI device, keeping
the chance of referencing to wrong data minimal.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Currently select() is used to monitor file descriptors for vhostuser
ports. This limits the number of ports possible to create since the
fd number is used as index in the fd_set and we have seen fds > 1023.
This patch changes select() to poll(). This way we can keep an
packed (pollfd) array for the fds, e.g. as many fds as the size of
the array.
Also see:
http://dpdk.org/ml/archives/dev/2016-April/037024.html
Reported-by: Patrik Andersson <patrik.r.andersson@ericsson.com>
Signed-off-by: Jan Wickbom <jan.wickbom@ericsson.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
REPLY_ACK features provide a generic way for QEMU to ensure both
completion and success of a request.
As described in vhost-user spec in QEMU repository, QEMU sets
VHOST_USER_NEED_REPLY flag (bit 3) when expecting a reply_ack from
the backend. Backend must reply with 0 for success or non-zero
otherwise when flag is set.
Currently, only VHOST_USER_SET_MEM_TABLE request implements reply_ack,
in order to synchronize mapping updates.
This patch enables REPLY_ACK feature generally, but only checks error
code for VHOST_USER_SET_MEM_TABLE.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
when "TAILQ_INIT()" was added to the loop of "for (lcore_id = 0; ...)"
statement, the assignment to "lcore_ids" was removed out of the loop.
It changed the original initialization of "lcore_ids".
Fix it by introducing two braces.
Fixes: 45657a5c68 ("examples/vhost: use tailq to link vhost devices")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
When calculating 'nr_mbufs_per_core', 'MAX_PKT_BURST' was mutiplied
twice. Fix it by removing one of them.
Fixes: bdb19b771e ("examples/vhost: fix mbuf allocation failure")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
.dev_start()/.dev_stop() roughly corresponds to the local device's port
being ready. This is different from the remote client being connected
which is roughly link up or down. Emulate the device start/stop behavior
by separately tracking the start/stop state to determine if we should
allow packets to be queued to/from the remote client.
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
If you create a vhost server device, it doesn't create the actual datagram
socket until you call .dev_start(). If you call .dev_stop() is also
deletes those sockets. For QEMU clients, this is a problem since QEMU
doesn't know how to re-attach to datagram sockets that have gone away.
To fix this, register and unregister the datagram sockets during device
creation and removal.
Fixes: ee584e9710 ("vhost: add driver on top of the library")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
In function vhost_new_device(), current code dose not free 'dev'
in "i == MAX_VHOST_DEVICE" condition statements. It will lead to a
memory leak.
Fixes: 45ca9c6f7b ("vhost: get rid of linked list for devices")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Current virtio driver advertises VERSION_1 support,
but does not handle device's VERSION_1 support when
sending packets (it looks for ANY_LAYOUT feature,
which is absent).
This patch enables 'can_push' in tx path when VERSION_1
is advertised by the device.
This significantly improves small packets forwarding rate
towards devices advertising VERSION_1 feature.
Signed-off-by: Pierre Pfister <ppfister@cisco.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
When reg_size < page_size the function read in
rte_mem_virt2phy would not return, because
host_user_addr is invalid.
Fixes: e246896178 ("vhost: get guest/host physical address mappings")
Cc: stable@dpdk.org
Signed-off-by: Haifeng Lin <haifeng.lin@huawei.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch adds function rte_pktmbuf_linearize to let crypto PMD coalesce
chained mbuf before crypto operation and extend their capabilities to
support segmented mbufs when device cannot handle them natively.
Included unit tests for rte_pktmbuf_linearize functionality:
1) Creates banch of segmented mbufs with different size and number of
segments.
2) Fills noncontigouos mbuf with sequential values.
3) Uses rte_pktmbuf_linearize to coalesce segmented buffer into one
contiguous.
4) Verifies data in linearized buffer.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Below MACsec offload commands are added:
- set macsec offload <port_id> on encrypt on|off replay-protect on|off
- set macsec offload <port_id> off
- set macsec sc tx|rx <port_id> <mac> <pi>
- set macsec sa tx|rx <port_id> <idx> <an> <pn> <key>
Also update the testpmd user guide.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
MACsec (or LinkSec, 802.1AE) is a MAC level encryption/authentication
scheme defined in IEEE 802.1AE that uses symmetric cryptography.
This commit adds the MACsec offload support for ixgbe.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If these flags are advertised by a PMD, the NIC supports the MACsec
offload. The incoming MACsec traffics can be offloaded transparently
after the MACsec offload is configured correctly by the application.
And the application can set the PKT_TX_MACSEC flag in mbufs to enable
the MACsec offload for the packets to be transmitted.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
This commit adds a below event type:
- RTE_ETH_EVENT_MACSEC
This event will occur when the PN counter in a MACsec connection
reaches the exhaustion threshold.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Add a new Tx flag in mbuf, that can be set by applications to
enable the MACsec offload for a packet to be transmitted.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Change the parameters of functions from const char *valid[] to
const char * const valid[]. This additional const is needed to
allow us to fix some checkpatch warnings, as well as being good
programming practice.
For the checkpatch warnings, if we have a set of command line
args that we want to check defined as:
static const char *args[] = { "arg1", "arg2", NULL };
kvlist = rte_kvargs_parse(params, args);
checkpatch will complain:
WARNING:STATIC_CONST_CHAR_ARRAY: static const char *
array should probably be static const char * const
Adding the additional const to the definition of the args
will then trigger a compiler error in the absence of this
change to the kvargs library, as we lose the const in the
call to kvargs_parse.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
By introducing explicit -lrte_pmd_ixgbe link request in
testpmd Makefile,"-Wl,-lrte_pmd_ixgbe" provided twice, and linker
removes the duplication by keeping only first occurrence.
This moves "-Wl,-lrte_pmd_ixgbe" out of "-Wl,--whole-archive" flag
and makes symbol generation totally different than previous version
in case of static build.
This patch fixes the static build linking order by introducing
-lrte_pmd_ixgbe under the shared library config
(CONFIG_RTE_BUILD_SHARED_LIB).
Fixes: 425781ff5a ("app/testpmd: add ixgbe VF management")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The prefix in the commit title must be a valid component name and is
checked in separate checks. For capitalization, just check the part after
the colon. This is already done for most capitalization checks, just make
the remainder consistent with this.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Currently we will check mempool flags when we put/get objects from
mempool. However, this makes cache useless when mempool is SC|SP,
SC|MP, MC|SP cases.
This patch makes cache available in above cases and improves performance.
Signed-off-by: Wenfeng Liu <liuwf@arraynetworks.com.cn>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Instead of passing domain, bus, devid, func, just pass
an rte_pci_addr.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Attaching and detaching ethernet ports from an application
is not the same thing as physically removing a PCI device,
so clarify the flags indicating support. All PCI devices
are assumed to be physically removable, so no flag is
necessary in the PCI layer.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
If resources were mapped prior to probe, unmap them
if probe fails.
This does not handle the case where the kernel driver was
forcibly unbound prior to probe.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Leaving default pattern item mask values up for interpretation by PMDs is
an undefined behavior that applications might find difficult to use in the
wild. It also needlessly complicates PMD implementation.
This commit addresses this by defining consistent default masks for each
item type.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Contrary to the current description, mbuf RSS hash result storage does not
overlap with the returned MARK value (hash.fdir.lo vs. hash.fdir.hi), and
both may be combined.
Reflect this change by allowing testpmd to display both values
simultaneously.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Both actions share the PKT_RX_FDIR mbuf flag, as a result there is no way
to tell them apart. Moreover, the maximum allowed value for the MARK action
may not necessarily cover the entire 32-bit space.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Based on initial PMD implementations of the flow API, returning the error
structure which may be NULL is useless and always discarded.
Returning the error code instead appears to be much more convenient.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit addresses several obvious issues reported by Coverity
with array bounds checks in functions related to the flow API.
Coverity issue: 139596, 139597, 139598, 139599
Fixes: 938a184a18 ("app/testpmd: implement basic support for flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Coverity reports a forward null dereference from a for loop
that works with a variable previously tested for null that had no error
handling or condition to prevent it. Pretty obvious fix below.
Coverity issue: 139593
Fixes: 98b0fdb0ff ("pmdinfogen: add buildtools and pmdinfogen utility")
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Add common vector type definitions to all CPU architectures.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Rename tools/ into usertools/ to differentiate from buildtools/
and devtools/ while making clear these scripts are part of
DPDK runtime.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
The remaining scripts in the scripts/ directory are only useful
to developers. That's why devtools/ is a better name.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
