Make number of flows in flowgen configurable by setting parameter
--flowgen-flows=N.
Signed-off-by: Zhihong Wang <wangzhihong.wzh@bytedance.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch add support to test the PDCP short MAC
packets in crypto.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch add support to handle PDCP short MAC-I domain
along with standard control and data domains as it has to
be treaty as special case with PDCP protocol offload support.
ShortMAC-I is the 16 least significant bits of calculated MAC-I. Usually
when a RRC message is exchanged between UE and eNodeB it is integrity &
ciphered protected.
MAC-I = f(key, varShortMAC-I, count, bearer, direction).
Here varShortMAC-I is prepared by using (current cellId, pci of source cell
and C-RNTI of old cell). Other parameters like count, bearer and
direction set to all 1.
crypto-perf app is updated to take short MAC as input mode.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
rte_cryptodev_pmd.h is an interface between
driver and library and it is mentioned in the
file that application cannot use it directly.
Hence, removing the include.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Previously, the scheduler unit test only created and attached 1 or 2
AESNI-MB cryptodev PMDs as workers if less than 2 AESNI-MB PMDs had
already been initialized.
This commit changes this to always create and attach 2 new AESNI-MB
cryptodev PMDs, regardless of previously initialized AESNI-MB PMDs.
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Donot use outer metadata when neither outer ip checksum nor
outer udp checksum is enabled. PMD's will ignore the
outer_l2_len and outer_l3_len in cases where none of
the outer checksum is enabled and hence only l2_len and
l3_len will be used to calculate the offsets for L2 or L3
header.
Fixes: 3c32113a1aac ("app/testpmd: fix IPv6 tunnel checksum")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Use per-core variable for flow indexing to solve cache contention in
multi-core scenarios.
Signed-off-by: Zhihong Wang <wangzhihong.wzh@bytedance.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Call inc_rx_burst_stats for rx operation, and record fwd_dropped.
Signed-off-by: Zhihong Wang <wangzhihong.wzh@bytedance.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Use the rte_ipv4_cksum API to replace local ip_sum implementation.
Signed-off-by: Zhihong Wang <wangzhihong.wzh@bytedance.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
UDP protocol reserves 0 checksum value for special purposes.
Other protocols, like IPv4, TCP and SCTP must calculate checksum value
in software or offload checksum calculation to hardware.
If IPv4 TX checksum offload was off and header checksum was set to 0,
testpmd csum engine did not calculate checksum value for IPv4, TCP and
SCTP.
The patch always calculates IPv4, TCP and SCTP TX checksums if it is
not offloaded.
Bugzilla ID: 768
Fixes: b2a9e4a855d0 ("app/testpmd: fix Tx checksum calculation for tunnel")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When closing file descriptors post-fork, ignore "." and ".." directory
entries, so the test log doesn't have distracting errors like:
Error converting name fd 0 .:
Error converting name fd 0 ..:
Signed-off-by: John Levon <john.levon@nutanix.com>
meson test was not capturing the intended output from the child
process; force a flush to ensure it reaches the test log.
Signed-off-by: John Levon <john.levon@nutanix.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Currently, there is vendor which can support bigger crypto data size.
Increase the default mbuf data payload size to 4K as needed.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Covert rte_atomic usages to compiler atomic built-ins in
rcu_perf testcases.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Convert rte_atomic usages to compiler atomic built-ins for lock
sync in service_cores testcases.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Convert rte_atomic usages to compiler atomic built-ins for lcores
sync in mempool_perf testcases. Meanwhile, remove unnecessary
synchro init as it would be set to 0 when launching cores.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Remove the unused synchro variable as there is no lcores
sync in mempool function test.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Convert rte_atomic usages to compiler atomic built-ins for lcores
sync in mcslock testcases.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Convert rte_atomic usages to compiler atomic built-ins for lcores
sync in rwlock testcases.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Convert rte_atomic usages to compiler atomic built-ins for lcores
sync in spinlock testcases.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Convert rte_atomic usages to compiler atomic built-ins for lcores
sync in ticketlock testcases.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
This patch add support for dump the device registers from a running
application. It can help developers locate the problem.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
The purpose of this script is to help automate ACL library functional
testing using test-acl app.
Sample input files are also provided.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Allow comment (lines starting with '#') and empty lines in input
(rules, traces) files. These lines will be just skipped and shouldn't
affect the result anyhow.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
After removing rte_eth_devices from testpmd the vm_hotplug no longer
recovered after removal of a device, because the port was closed
before querying it.
Fixes: 0a0821bcf312 ("app/testpmd: remove most uses of internal ethdev array")
Signed-off-by: Paulis Gributs <paulis.gributs@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
csumonly engine calculates Tx checksum of a tunnelled packet
for outer headers only or separately for outer and inner headers.
The calculation method is determined by checksum configuration options.
If Tx checksum calculation is separated,
the inner headers are processed before outer headers.
Inner headers processing sets checksum values to 0 unconditionally.
If Tx configuration offloads inner checksums only, outer checksum
calculation in software will read 0 instead of real values
and produce wrong result.
The patch zeroes inner checksums only before software calculation.
Fixes: 6b520d54ebfe ("app/testpmd: use Tx preparation in checksum engine")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Running with stdout suppressed or redirected for further processing
is very confusing in the case of errors. Fix it by logging errors and
warnings to stderr.
Since lines with log messages are touched anyway concatenate split
format strings to make it easier to search using grep.
Fix indent of format string arguments.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch removes most uses of the global variable rte_eth_devices
from testpmd. This was done to avoid using the object directly which
applications should not do.
Most uses have been replaced with standard function calls, however
the use of it in the show_macs function could not be replaced as no
function call exists to get all mac addresses of a given port.
Signed-off-by: Paulis Gributs <paulis.gributs@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
MAC address of each port in global variable ports hasn't been updated
after resetting. It was the initial one after resetting VF MAC address.
This patch gets correct port MAC address when starting port.
Fixes: a5279d25616d ("app/testpmd: check status of getting MAC address")
Cc: stable@dpdk.org
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Command help string is missing 'reset' keyword,
although description has it. Adding it.
Fixes: 97f1e196799f ("app/testpmd: add port reset command")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
This patch adds checking if RAW API is supported at the start
of the test command "cryptodev_qat_raw_api_autotest".
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
In order to test the new mlx5 crypto PMD, the driver is added to the
crypto test application.
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The AES-XTS algorithm can supports wrapped key and data-unit.
The encryption/decryption can be done out of place and using multi
segments.
Add multi segment and out of place tests to the recently added AES-XTS
vectors, which support using data-unit and a wrapped key.
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The AES-XTS algorithm supports using a wrapped key.
In AES-XTS the data-unit defines the data block size to be
encrypted\decrypted.
Add AES-XTS vectors with a wrapped key.
Add a variable stating whether the key is wrapped or not.
Add the AES-XTS data-unit.
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Currently, private_data_offset for the sessionless is computed
wrongly which includes extra bytes added by
sizeof(struct rte_crypto_sym_xform) * 2. This causes buffer
overflow which leads to test application crash while freeing the
ops mempool. This patch provides fix for the same and also takes
care of increasing the length of ops to accommodate space for
rte_event_crypto_metadata while creating the crypto ops mempool.
Fixes: 3c2c535ecfc0 ("test: add event crypto adapter auto-test")
Cc: stable@dpdk.org
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Reported-by: Ciara Power <ciara.power@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
For acpi_cpufreq and cppc_cpufreq, both cpuinfo_cur_freq and
scaling_cur_freq exist. For pstate, only scaling_cur_freq exists.
And value in scaling_cur_freq and cpuinfo_cur_freq may not be the
same. For acpi_cpufreq and cppc_cpufreq, we should check
cpuinfo_cur_freq but not scaling_cur_freq. So here change the
check sequence to make sure it works for all cpufreq drivers.
Besides, add rounding for pstate driver.
Fixes: ff6dfb8e492f ("test/power: fix CPU frequency check")
Cc: stable@dpdk.org
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Acked-by: David Hunt <david.hunt@intel.com>
Add a new testpmd pattern field 'last_rsvd' that supports the
last 8-bits matching of VXLAN header.
The examples for the "last_rsvd" pattern field are as below:
1. ...pattern eth / ipv4 / udp / vxlan last_rsvd is 0x80 / end ...
This flow will exactly match the last 8-bits to be 0x80.
2. ...pattern eth / ipv4 / udp / vxlan last_rsvd spec 0x80
vxlan mask 0x80 / end ...
This flow will only match the MSB of the last 8-bits to be 1.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Raslan Darawsheh <rasland@nvidia.com>
The new flow item allows PMD to offload IPv4 IHL field for matching,
if hardware supports that operation.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Reviewed-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
For the newly attached ports (with "port attach" command) the
default offloads settings, configured from application command
line, were not applied, causing port start failure following
the attach.
For example, if scattering offload was configured in command
line and rxpkts was configured for multiple segments, the newly
attached port start was failed due to missing scattering offload
enable in the new port settings. The missing code to apply
the offloads to the new device and its queues is added.
The new local routine init_config_port_offloads() is introduced,
embracing the shared part of port offloads initialization code.
Fixes: c9cce42876f5 ("ethdev: remove deprecated attach/detach functions")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
On arm platform, the value in "/sys/.../cpuinfo_cur_freq" may not
be exactly the same as what was set when using CPPC cpufreq driver.
For other cpufreq driver, no need to round it currently, or else
this check will fail with turbo enabled. For example, with acpi_cpufreq,
cpuinfo_cur_freq can be 2401000 which is equal to freqs[0].It should
not be rounded to 2400000.
Fixes: 606a234c6d360 ("test/power: round CPU frequency to check")
Cc: stable@dpdk.org
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Acked-by: David Hunt <david.hunt@intel.com>
Currently in DPDK only acpi_cpufreq and pstate_cpufreq drivers are
supported, which are both not available on arm64 platforms. Add
support for cppc_cpufreq driver which works on most arm64 platforms.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Acked-by: David Hunt <david.hunt@intel.com>
Replaces the use of local ARRAY_SIZE macro, which is not used
anywhere else, with the formal RTE_DIM macro for better
consistency in crypto unit test.
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Fixed typo in the crypto unit test ESN function name by
replacing the word 'encryt' with the correct word 'encrypt'.
test_authenticated_encryt_with_esn is now called
test_authenticated_encrypt_with_esn.
Fixes: 699741912d71 ("test/crypto: add case for auth only trailer")
Cc: stable@dpdk.org
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Fixed typo in the testcase description for AES in the crypto
unit test suite by changing the word 'Scater' to 'Scatter'.
Fixes: c9c9c4ed8746 ("app/test: check scatter-gather for crypto drivers")
Cc: stable@dpdk.org
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Modifies the scheduler tests in the crypto unit test suite
to replace the usage of the word 'slave' with the more
appropriate word 'worker'.
The scheduler test functions were modified as follows:
test_scheduler_attach_slave_op is now called
test_scheduler_attach_worker_op,
test_scheduler_detach_slave_op is
test_scheduler_detach_worker_op.
Signed-off-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Use m only after it was checked not to be NULL.
Fixes: 202d375c60bc1 ("app/test: add cryptodev unit and performance tests")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add missing rte_mbuf size in mempool allocation for
out-of-place operation.
Fixes: bf9d6702eca9 ("app/crypto-perf: use single mempool")
Cc: stable@dpdk.org
Signed-off-by: Kai Ji <kai.ji@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
