Don't need to check dependencies if test apps will not be built anyway.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Each hash entry has a pointer to one uint32 memory location.
However, all the readers increment the same location causing
race conditions. Allocate memory for each thread so that each
thread will increment its own memory location.
Fixes: b87089b0bb19 ("test/rcu: add API and functional tests")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.
old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
No need for this macro here, take it from librte_net.
Fixes: 24ac604ef746 ("net: add rte prefix to IP defines")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Don't refer to lcore_config directly.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Prefer the existing apis rather than direct access lcore_config that is
going to disappear.
Fixes: b87089b0bb19 ("test/rcu: add API and functional tests")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Prefer the existing apis rather than direct access the configuration
structure.
test_hash_multi_add_lookup() currently starts n readers and N writers
using rte_eal_remote_launch().
It then waits for the N writers to complete with a custom
multi_writer_done[] array to synchronise over.
Jump on the occasion to use rte_eal_wait_lcore() so that the code is
more straightforward:
- we start n readers with rte_eal_remote_launch(),
- we start N writers with rte_eal_remote_launch(),
- we wait for N writers to join with rte_eal_wait_lcore(),
- we wait for n readers to join with rte_eal_wait_lcore(),
Fixes: c7eb0972e74b ("test/hash: add lock-free r/w concurrency")
Fixes: 3f9aab961ed3 ("test/hash: check lock-free extendable bucket")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Also rename arp_hrd, arp_pro, arp_hln, arp_pln and arp_op fields
to avoid conflict with the #defines in gnu libc.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is an error in function rxtx_port_config(), which may overwrite
offloads configuration get from function launch_args_parse() when run
testpmd app. So rxtx_port_config() should do "or" for port offloads.
Fixes: d44f8a485f5d ("app/testpmd: enable per queue configure")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Peng Yuan <yuan.peng@intel.com>
This patch adds a unit test for rte_hash_free_key_with_position().
Suggested-by: Linfan <zhongdahulinfan@163.com>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
The memory barrier test fails on IBM Power 9 systems. Add additional
barriers to accommodate the weakly ordered model used on Power CPUs.
Fixes: 93da5b59afc9 ("test: introduce memory barrier test case")
Cc: stable@dpdk.org
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Memory barrier failures can be intermittent. Increase the size of the
sum/val/iteration variables to allow tests that can run for days so that
sporadic errors can be identified.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Code tested calloc failures for pt & lpt variables
but not for the sum variable. Add a test for calloc
failure of sum.
Fixes: 93da5b59afc9 ("test: introduce memory barrier test case")
Cc: stable@dpdk.org
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Change "much" to "match" in a printf.
Fixes: 93da5b59afc9 ("test: introduce memory barrier test case")
Cc: stable@dpdk.org
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The eal_flags_autotest checks that no hugepage map files are left behind
after a process exits, which can only be the case if all allocations made
from DPDK heaps were freed back to the freelist, resulting in the
hugepage map files being unlinked automatically. Add a call to
rte_timer_subsystem_finalize() at application exit time to release
allocations now made by the timer library.
Fixes: c0749f7096c7 ("timer: allow management in shared memory")
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Currently some tests return TEST_SKIPPED/-1 when tests or params
are not supported for particular PMD because of which tests adds to
FAILED test counter in place of Skipped/Unsupported counter.
Since unsupported test is not a failure case,
replace return value TEST_SKIPPED/-1 with -ENOTSUP
- Return -ENOTSUP for unsupported tests
- add NULL check for rte_cryptodev_asym_capability_get()
- Typo correction
Signed-off-by: Ayuj Verma <ayverma@marvell.com>
Signed-off-by: Shally Verma <shallyv@marvell.com>
The last mbuf allocated in bulk is never used and never freed.
Fixes: 01b645dcff7f ("app/testpmd: move txonly prepare in separate function")
Fixes: 561ddcf8d099 ("app/testpmd: allocate txonly segments per bulk")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Rather than call nm on the test application binary for each test to
consider, call it once at the object init.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
This test has been removed by the commit 83945fbd7c49 ("test: remove
devargs unit tests") which left some trace in meson and reintroduced in
autotest by the second commit 9eabcb682493 ("test: update autotest
list").
Fixes: 83945fbd7c49 ("test: remove devargs unit tests")
Fixes: 9eabcb682493 ("test: update autotest list")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This reverts commit bdca79053b6aea504d02691d9319fa976062457f.
Not all PMDs support the fixed link speed set, and link speed can be set
even with auto negotiation enabled. Reverting the patch to not break
existing usage.
Fixes: bdca79053b6a ("app/testpmd: set fixed flag for exact link speed")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fix test_set_bonded_port_initialization_mac_assignment so that it works
after 're run' test_link_bonding.
Fixes: f2ef6f21ee2e ("bond: fix mac assignment to slaves")
Cc: stable@dpdk.org
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Acked-by: Chas Williams <chas3@att.com>
Fix the potential overflow in expression 1 << begin by using 1ULL.
Coverity issue: 279437, 279445
Fixes: c73a9071877a ("app/testpmd: add commands to test new offload API")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The value returned from rte_eth_dev_tx_offload_name() function is used
for string comparison before being checked for NULL. Move the NULL check
up to be done first.
Coverity issue: 279438
Fixes: c73a9071877a ("app/testpmd: add commands to test new offload API")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
Test all existing power environment configuration to verify if related
data is properly initialized and clean in set/unset scenarios.
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add option --multi, to enhance pdump application to allow capture
on unique cores for each --pdump option. If option --multi is ignored
the default capture occurs on single core for all --pdump options.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
PDUMP application is being limited to run on default first core.
The patch removes the restriction, allowing user to run on any of
selected cores in EAL args. If no args are passed, logic runs on
default master core.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
sprintf function is not secure as it doesn't check the length of string.
More secure function snprintf and strlcpy is used.
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
This commit adds an autotest which exercises new timer reset/stop APIs
in a secondary process. Timers are created, and sometimes stopped, in
the secondary process, and their expiration is checked for and handled
in the primary process.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
This patch changes what testpmd uses as IP addresses when
run in transmit only mode. The old code was using
192.168.0.1 -> 192.168.0.2
but these addresses are reserved for private Internet by RFC 1918.
The new code uses 192.18.0.1 and 192.18.0.2 which are on the
subnet reserved for performance testing by RFC 2544.
New command line option allows the user to pick any other src/dst
address desired.
Notice: this changes the default IP address for transmit only.
It may cause some user who has hardcoded network addresses to report
a regression.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Promote the adapter functions and rte_event_port_unlinks_in_progress()
as stable as it's been added for a while now and multiple drivers and
test application like test-eventdev has been tested using the adapter APIs.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The function rte_eal_cleanup() was introduced more than one year ago,
in DPDK 18.02. It is no longer experimental, allowing
pdump, proc-info and hotplug_mp apps to not need any experimental API.
The function rte_ctrl_thread_create() was introduced one year ago
in DPDK 18.05. It is no longer experimental, allowing
KNI PMD and TEP example to not need any experimental API.
The functions rte_socket_count() and rte_socket_id_by_idx() were
introduced one year ago in DPDK 18.05. They are no longer experimental.
The function rte_dev_is_probed() was introduced half a year ago
in DPDK 18.11. It is no longer experimental.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
As stated in the deprecation notice from December 2016,
"the legacy filter API, including rte_eth_dev_filter_supported(),
rte_eth_dev_filter_ctrl() as well as filter types MACVLAN, ETHERTYPE,
FLEXIBLE, SYN, NTUPLE, TUNNEL, FDIR, HASH and L2_TUNNEL, is superseded
by the generic flow API (rte_flow)".
After a long wait of more than two years, the legacy filter API
is marked as deprecated, while still tested with testpmd and
the tep_termination example.
The next step will be to announce a deadline for complete removal.
As preparation of the removal of rte_eth_ctrl.h,
RTE_ETH_FLOW_*, RTE_TUNNEL_TYPE_* and RTE_ETH_HASH_FUNCTION_* definitions
are moved to rte_ethdev.h and rte_flow.h.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
At port detach routine after calling the rte_dev_remove()
testpmd performs some cleanup, checking the statuses of
remaining ports and closes the appropriate ones. The port
scanning is based on the new sibling iterator which uses the
invalid (already closed) port for reference. This patch
replaces the foreach iterator and uses the device object for
reference. It is worth to note this cleanup is not needed
for some drivers (at least for mlx5 and probably for others)
and is preserved due to possible compatibility issues.
Fixes: 13302cd5bd63 ("app/testpmd: use port sibling iterator in device cleanup")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Setting exact link speed makes sense if auto-negotiation is
disabled. Fixed flag is required to disable auto-negotiation.
Fixes: 88fbedcd5e5a ("app/testpmd: move speed and duplex parsing in a function")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Build of test_compressdev.c fails on FreeBSD due to the missing
include of unistd.h, to provide the function usleep.
Fixes: b06aa643cac4 ("test/compress: add initial unit tests")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Fixed the compilation error:
app/test/test_compressdev.c:1949:11: note:
previous definition of 'i' was here
app/test/test_compressdev.c:1992:2: error:
'for' loop initial declarations are only allowed in C99 mode
app/test/test_compressdev.c:1992:2: note:
use option -std=c99 or -std=gnu99 to compile your code
app/test/test_compressdev.c:1996:19: warning:
assignment from incompatible pointer type [enabled by default]
Fixes: 355b02eedc65 ("test/compress: add max mbuf size test case")
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
