Add module EEPROM/EEPROM dump command
"show port <port_id> (module_eeprom|eeprom)"
Commands will dump the content of the EEPROM/module
EEPROM for the selected port.
Signed-off-by: David Liu <dliu@iol.unh.edu>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Make is no longer supported, RTE_SDK, RTE_TARGET and CONFIG options
are no longer in use.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Remove the part that checks if there is enough room in the stack, it's
always true as long as size of stack >= MAX_BULK*rte_lcore_count().
This check used an atomic cmpset, and read / write to a shared size
variable. These operations result in some form of synchronization
that might get in the way of the actual stack testing.
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Use rte_eal_wait_lcore to wait and get the return value for all cores.
This is used to propagate any error to the main core.
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Replace the arguments array by one argument.
All objects in the args array have the same values, so there is no need
to use an array, only one struct is enough.
The args object is a lot smaller, and the allocation can be replaced
with a global variable.
As a consequence of using a single argument, there is no need to use a
loop to launch the test on every core one by one. Replace it with
rte_eal_mp_remote_launch.
The allocation of obj_table isn't needed either, because MAX_BULK is
small. The allocation can instead be replaced with a static array.
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Replace use of RTE_MACHINE_CPUFLAG macros with regular compiler
macros, which are more complete than those provided by DPDK, and as such
it allows new instruction sets to be leveraged without having to do
extra work to set them up in DPDK.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Add more parameters into the macro TEST_RING_VERIFY and expand the scope
of application for it. Then replace all ring APIs check with
TEST_RING_VERIFY to facilitate debugging.
Furthermore, correct a spelling mistakes of the macro
TEST_RING_FULL_EMTPY_ITER.
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Do code clean up by moving repeated code inside 'test_ring_mem_cmp'
function to validate data and print information of enqueue/dequeue
elements if validation fails.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Validate the return value of single element enqueue/dequeue operation in
the test.
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add check in test_ring_basic_ex and test_ring_with_exact_size for single
element enqueue and dequeue operations to validate the dequeued objects.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When using memcmp function to check data, the third param should be the
size of all elements, rather than the number of the elements.
Fixes: a9fe152363 ("test/ring: add custom element size functional tests")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The ring capacity is (RING_SIZE - 1), thus only (RING_SIZE - 1) number of
elements can be enqueued into the ring.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When enqueue one element to ring in the performance test, a pointer
should be passed to rte_ring_[sp|mp]enqueue APIs, not the pointer
to a table of void *pointers.
Fixes: a9fe152363 ("test/ring: add custom element size functional tests")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add a field named rx_buf_size in rte_eth_rxq_info to indicate the buffer
size used in receiving packets for HW.
In this way, upper-layer users can get this information by calling
rte_eth_rx_queue_info_get.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add usage of rte_eth_link_to_str function to applications and docs.
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is new link_speed value introduced. It's INT_MAX value which
means that speed is unknown. To simplify processing of the value
in application, new function is added which convert link_speed to
string. Also dpdk examples have many duplicated code which format
entire link status structure to text.
This commit adds two functions:
* rte_eth_link_speed_to_str - format link_speed to string
* rte_eth_link_to_str - convert link status structure to string
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adding support to set RSS level from ethdev config.
level-default will requests the default behavior.
level-outer will requests RSS to be performed on the outermost packet
encapsulation level.
level-inner will request RSS to be performed on the specified inner
packet encapsulation level, from outermost to innermost.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The bitrate library in DPDK is actually in a "bitratestats" directory,
so that is used by meson for the macro and library name.
Therefore, we need to update references to RTE_LIBRTE_BITRATE to
RTE_LIBRTE_BITRATESTATS in testpmd to have it found. Rather than
supporting both defines, since make is being removed, we can just
replace all instances of the former define with the latter.
To ensure testpmd links ok when this is done, we also need to add
bitratestats to the list of library dependencies.
Fixes: 5b9656b157 ("lib: build with meson")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Wei Ling <weix.ling@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Sometime the user want to have fixed values of
encap/decap or header modify for all flows.
This will introduce the ability to choose from
fixed or dynamic values by setting the flag in
config.h
To use different value for each flow:
config.h: #define FIXED_VALUES 0
To use single value for all flows:
config.h: #define FIXED_VALUES 1
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Start support matching on icmpv4 and icmpv6.
Usage:
--icmpv4: add icmp item to match on.
--icmpv6: add icmpv6 item to match on.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Sometimes you need to check flow performance for
certain port and not all ports. Thus a portmask
option is needed.
Usage:
--portmask=N
Where N represent the hexadecimal bitmask of ports
used.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Instead of having single id value, use up to 256
values, thus we make sure that all flows will not
use same mark action.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
All value must be converted into intended endianness.
Fixes: bf3688f1e8 ("app/flow-perf: add insertion rate calculation")
Cc: stable@dpdk.org
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Introduce raw-encap and raw-decap actions.
The two actions are added in command line
options, and for the data to encap or decap
the user need to parse it within the command
line.
All values of raw-encap data is set to be fixed
values.
Usage example:
--raw-encap=ether,ipv4,udp,vxlan
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Currently, each call for add_rss_action will allocate
extra memory for rss_data, which will reflect bad results
on memory consumption for all flows, and will leads into
memory leak.
In this fix, it will check if it's allocated before
reallocating it.
Fixes: bf3688f1e8 ("app/flow-perf: add insertion rate calculation")
Cc: stable@dpdk.org
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Introduce flag action support to flow perf
application.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Introduce headers modify actions in the app.
All header modify actions will add different value
for each flow, to make sure each flow will create
and use it's own actions.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
The old design was using the bit mask to identify
items, action and attributes.
So it was all based on the order of the code itself,
to place the order of the actions, items & attributes
inside the flows. Such design will lead into many failures
when some PMD support order different than other PMD,
in the end the rules will fail to create. Also sometimes
the user needs to have one action before other actions
and vice versa, so using new design of arrays that
take user order into consideration make more sense.
After this patch, we start supporting inner items
and more than one instance of same action.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Actions have it's own macro which is FLOW_ACTION_MASK
Fixes: bf3688f1e8 ("app/flow-perf: add insertion rate calculation")
Cc: stable@dpdk.org
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Alexander Kozyrev <akozyrev@nvidia.com>
Add TM command to enable packet mode for all SP children
in non leaf node. This is a new command as
"add tm nonleaf node pktmode".
Also add support to shaper profile add command to take
packet mode parameter used to setup shaper in packet mode.
This adds an extra argument "packet_mode" to shaper profile add command
"add port tm node shaper profile" as last argument.
This patch also dumps new tm port/level/node capabilities
sched_wfq_packet_mode_supported, sched_wfq_byte_mode_supported,
shaper_private_packet_mode_supported, shaper_private_byte_mode_supported,
shaper_shared_packet_mode_supported, shaper_shared_byte_mode_supported.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
'_rte_eth_dev_callback_process()' & '_rte_eth_dev_reset()' internal APIs
has unconventional underscore ('_') prefix.
Although this is not documented most probably this is to mark them as
internal. Since we have '__rte_internal' flag to mark this, removing '_'
from API names.
For '_rte_eth_dev_reset()', there is already a public API named
'rte_eth_dev_reset()', so renaming '_rte_eth_dev_reset()' to
'rte_eth_dev_internal_reset'.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
This commit fixes a potential race condition in the tests
where the lcore running a service would increment a counter
that was already reset by the test-suite thread. The resulting
race-condition incremented value could cause CI failures, as
indicated by DPDK's CI.
This patch fixes the race-condition by making use of the
added rte_service_lcore_active() API, which indicates when
a service-core is no longer in the service-core polling loop.
The unit test makes use of the above function to detect when
all statistics increments are done in the service-core thread,
and then the unit test continues finalizing and checking state.
Fixes: f28f3594de ("service: add attribute API")
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Currently with the rawdev API there is no way to check that the structure
passed in via the dev_private pointer in the dev_info structure is of the
correct type - it's just checked that it is non-NULL. Adding in the length
of the expected structure provides a measure of typechecking, and can also
be used for ABI compatibility in future, since ABI changes involving
structs almost always involve a change in size.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The testpmd application forwards data in multiple threads.
In the txonly mode the Tx timestamps must be initialized
on per thread basis to provide phase shift for the packet
burst being sent. This per thread initialization was performed
on zero value of the variable in thread local storage and
happened only once after testpmd forwarding start. Executing
"start" and "stop" commands did not cause thread local variables
zeroing and wrong timestamp values were used.
Fixes: 4940344dab ("app/testpmd: add Tx scheduling command")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Following the new RegEx class.
There is a need to create a dedicated test application in order to
validate this class and PMD.
Unlike net device this application loads data from a file.
This commit introduces the new RegEx test app.
The basic app flow:
1. Configure the RegEx device to use one queue, and set the rule
database, using precompiled file.
2. Allocate mbufs based on the requested number of jobs, each job will
i get one mbuf.
3. Enqueue as much as possible jobs.
4. Dequeue jobs.
5. if the number of dequeue jobs < requested number of jobs job to step
Signed-off-by: Ori Kam <orika@mellanox.com>
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
This patch adds support for DOCSIS and PDCP security protocols to the
pmd-cyclecount mode of the crypto performance tool. Adding this support
involves freeing the correct session type (i.e. security or cryptodev
session) when the test ends, depending on the op_type specified.
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Set the source mbuf data and packet lengths correctly for DOCSIS
performance tests.
Fixes: d4a131a949 ("test/crypto-perf: support DOCSIS protocol")
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
test_delay_us_sleep registers sleep based delay for testing.
This changes the default delay function of testing environment.
It is not expected.
Restore default delay function after the test to fix the issue.
Fixes: a51639cc72 ("eal: add nanosleep based delay function")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Prepare for python2 removal in 20.11.
Signed-off-by: Louise Kilheeney <louise.kilheeney@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Use of the print function required for python3 compatibility.
Signed-off-by: Louise Kilheeney <louise.kilheeney@intel.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
When using --lcores option, there is a limit of CPU_SETSIZE.
Currently that allows 0..1023 on Linux.
Check it is caught when this limit is exceeded.
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
blockcipher cases are either returning TEST_SUCCESS
or TEST_FAILED as status, but the test may not be
supported by the PMD which is also a success case
for the PMD. Hence checking for status == TEST_FAILED
for setting the overall status as failed.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ankur Dwivedi <adwivedi@marvell.com>
