Remove MTU verification from ena_mtu_set() and ena_start(). It is done
by rte_ethdev already, so there is no reason to repeat it inside the ENA
driver.
Signed-off-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
Add support for RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE offload. It can be
enabled if all the mbufs for a given queue belong to the same mempool
and their reference count is equal to 1.
Signed-off-by: Dawid Gorecki <dgr@semihalf.com>
Reviewed-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
l3fwd-acl contains duplicate functions to l3fwd.
For this reason we merge l3fwd-acl code into l3fwd
with '--lookup acl' cmdline option to run ACL.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add missing em_mask_key() implementation and fix l3fwd_common.h
inclusion in FIB lookup functions to enable the l3fwd to be run on
RISC-V.
Sponsored-by: Frank Zhao <frank.zhao@starfivetech.com>
Sponsored-by: Sam Grove <sam.grove@sifive.com>
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Define the missing __NR_bpf syscall id to enable the tap PMD.
Sponsored-by: Frank Zhao <frank.zhao@starfivetech.com>
Sponsored-by: Sam Grove <sam.grove@sifive.com>
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Define the missing __NR_memfd_create syscall id to enable the memif PMD.
Sponsored-by: Frank Zhao <frank.zhao@starfivetech.com>
Sponsored-by: Sam Grove <sam.grove@sifive.com>
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Re-use vector processing stubs in ixgbe PMD defined for PPC for RISC-V.
This enables ixgbe PMD usage in scalar mode on this architecture.
The ixgbe PMD driver was validated with Intel X520-DA2 NIC and the
test-pmd application. Packet transfer checked using all UIO drivers
available for non-IOMMU platforms: uio_pci_generic, vfio-pci noiommu and
igb_uio.
Sponsored-by: Frank Zhao <frank.zhao@starfivetech.com>
Sponsored-by: Sam Grove <sam.grove@sifive.com>
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Add checks for all flag values defined in the RISC-V misa CSR register.
Sponsored-by: Frank Zhao <frank.zhao@starfivetech.com>
Sponsored-by: Sam Grove <sam.grove@sifive.com>
Signed-off-by: Michal Mazurek <maz@semihalf.com>
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Validate RISC-V compilation when test-meson-builds.sh is called. The
check will be only performed if appropriate toolchain is present on the
system (same as with other architectures).
Sponsored-by: Frank Zhao <frank.zhao@starfivetech.com>
Sponsored-by: Sam Grove <sam.grove@sifive.com>
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Add all necessary elements for DPDK to compile and run EAL on SiFive
Freedom U740 SoC which is based on SiFive U74-MC (ISA: rv64imafdc)
core complex.
This includes:
- EAL library implementation for rv64imafdc ISA.
- meson build structure for 'riscv' architecture. RTE_ARCH_RISCV define
is added for architecture identification.
- xmm_t structure operation stubs as there is no vector support in the
U74 core.
Compilation was tested on Ubuntu and Arch Linux using riscv64 toolchain.
Clang compilation currently not supported due to issues with missing
relocation relaxation.
Two rte_rdtsc() schemes are provided: stable low-resolution using rdtime
(default) and unstable high-resolution using rdcycle. User can override
the scheme by defining RTE_RISCV_RDTSC_USE_HPM=1 during compile time of
both DPDK and the application. The reasoning for this is as follows.
The RISC-V ISA mandates that clock read by rdtime has to be of constant
period and synchronized between all hardware threads within 1 tick
(chapter 10.1 in version 20191213 of RISC-V spec).
However this clock may not be of high-enough frequency for dataplane
uses. I.e. on HiFive Unmatched (FU740) it is 1MHz.
There is a high-resolution alternative in form of rdcycle which is
clocked at the core clock frequency. The drawbacks are that it may be
disabled during sleep (WFI), its frequency might change due to DVFS and
it is core-local and therefore cannot be used as a wall-clock. It can
however be used for micro-benchmarking user applications, similarly to
Aarch64's PMCCNTR PMU counter.
The platform is currently marked as linux-only because rte_cycles
implementation uses the timebase-frequency device-tree node read through
the proc file system. Such approach was chosen because Linux kernel
depends on the presence of this device-tree node.
The i40e PMD driver is disabled on RISC-V as the rv64gc ISA has no vector
operations.
The compilation of following modules has been disabled by this commit
and will be re-enabled in later commits as fixes are introduced:
net/ixgbe, net/memif, net/tap, example/l3fwd.
Sponsored-by: Frank Zhao <frank.zhao@starfivetech.com>
Sponsored-by: Sam Grove <sam.grove@sifive.com>
Signed-off-by: Michal Mazurek <maz@semihalf.com>
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Batch op data is initialized inside mempool alloc. But
in case of empty mempools, the alloc function is not
called and hence the initialization of batch op data is
also not done. So ensure the validity of batch op data
inside mempool free.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Controlling existing GPIO should be normally frowned upon because
we want to avoid situation where multiple contenders modify GPIO
state simultaneously.
Still there might be situations where this is actually needed.
Restarting killed application being an example here.
So relax current restrictions and respect user needs.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
When sending a command to an idxd device via PCI BAR, the response from
HW is checked to ensure it was successful. The response was incorrectly
being negated before being returned by the function, meaning error codes
cannot be checked against the HW specification.
This patch fixes the return values of the function by removing the
negation.
Fixes: 9449330a84 ("dma/idxd: create dmadev instances on PCI probe")
Fixes: 452c1916b0 ("dma/idxd: fix truncated error code in status check")
Cc: stable@dpdk.org
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Conor Walsh <conor.walsh@intel.com>
Move the "source_org" page to after overview, where it fits
better to explain the source-code layout of DPDK, before getting
into details of specific libraries such as EAL.
Also removes the older titles from the 3 documents which still had them.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Small improvements to the documentation based on Sphinx HTML doc output.
Fixes: 14b8f0bbe5 ("doc: add BPF library guide")
Fixes: b901d92836 ("bpf: support packet data load instructions")
Cc: stable@dpdk.org
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
Allow building generic arm64 target using config/arm/arm64_armv8_linux_*
config which works on both cn9k and cn10k by relaxing cache line size
requirements a bit.
While at it move cache line checks to common place.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Update and add maintainers for NXP devices and RAW device API.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
If the setup function returns TEST_SKIPPED, the logs would say the test
case is skipped while the summary count would consider it under failed
cases. Address this by counting such test cases under 'skipped'.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
To allow other projects to easily use DPDK as a subproject, add in the
necessary dependency definitions. Slightly different definitions are
necessary for static and shared builds, since for shared builds the
drivers should not be linked in, and the internal meson dependency
objects are more complete.
To use DPDK as a subproject fallback i.e. use installed DPDK if present,
otherwise the shipped one, the following meson statement can be used:
libdpdk = dependency('libdpdk', fallback: ['dpdk', 'dpdk_dep'])
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ben Magistro <koncept1@gmail.com>
Tested-by: Ben Magistro <koncept1@gmail.com>
At device probe, the fslmc bus driver calls rte_vfio_get_group_fd() to
get a fd associated to a vfio group. This function first checks if the
group is already opened, else it opens /dev/vfio/%u, and increases the
number of active groups in default_vfio_cfg (which references the
default vfio container).
When adding the first group to a vfio_cfg, the caller is supposed to
pick an IOMMU type and set up DMA mappings for container, as it's done
by pci bus, but it is not done here. Instead, a new container is created
and used.
This prevents the pci bus driver, which uses the default_vfio_cfg
container, to configure the container because
default_vfio_cfg->active_group > 1.
This patch fixes the issue by always creating a new container (and its
associated vfio_cfg) and binding the group to it.
Fixes: a69f793002 ("bus/fslmc: support multi VFIO group")
Cc: stable@dpdk.org
Signed-off-by: Romain Delhomel <romain.delhomel@6wind.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch replaces instances of zero-sized arrays i.e. those at the end
of structures with "[0]" with the more standard syntax of "[]".
Replacement was done using coccinelle script, with some revert and
cleanup of whitespace afterwards.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add script to replace [0] with [] when used at the end of a struct.
The script also includes an additional struct member to match against so
as to avoid issues with arrays with only a single zero-length element.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
PAC N6000 is the first OFS platform, its device id is added to ifpga
device support list.
Previous FPGA platform like Intel PAC N3000 and N5000, FME DFL (Device
Feature List) starts from BAR0 by default, port DFL location is indicated
in PORTn_OFFSET register in FME. In OFS implementation, FME DFL and port
DFL location can be defined individually in PCIe VSEC (Vendor Specific
Extended Capabilities). In this patch, DFL definition is searched in VSEC,
the legacy DFL is used only when DFL VSEC is not present.
In original DFL enumeration process, AFU is expected to locate in port DFL,
but this is not the case in OFS implementation. In this patch, enumeration
can search AFU in any PF/VF which has no FME and port.
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
There is an API rte_pmd_ifpga_cleanup provided by ifpga driver to
free the software resource used by ifpga card. The function call
of rte_pmd_ifpga_cleanup is list below.
rte_pmd_ifpga_cleanup()
ifpga_rawdev_cleanup()
rte_rawdev_pmd_release()
rte_rawdev_close()
ifpga_rawdev_close()
The interrupts are unregistered in ifpga_rawdev_destroy instead of
ifpga_rawdev_close function, so rte_pmd_ifpga_cleanup cannot free
interrupt resource as expected.
To fix such issue, interrupt unregistration is moved from
ifpga_rawdev_destroy to ifpga_rawdev_close function. The change of
function call of ifpga_rawdev_destroy is as below.
ifpga_rawdev_destroy()
ifpga_unregister_msix_irq() // removed
rte_rawdev_pmd_release()
rte_rawdev_close()
ifpga_rawdev_close()
Fixes: e0a1aafe2a ("raw/ifpga: introduce IRQ functions")
Cc: stable@dpdk.org
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Virtual devices created on ifpga raw device will not be removed
when ifpga device has closed. To avoid resource leak problem,
this patch introduces an ifpga virtual device remove function,
virtual devices will be destroyed after the ifpga raw device closed.
Fixes: ef1e8ede3d ("raw/ifpga: add Intel FPGA bus rawdev driver")
Cc: stable@dpdk.org
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
These APIs are introduced in DPDK 21.05 and have been tested in several
release, experimental tag can be formally removed.
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Add functions for setting and getting the priority of a thread.
Priorities on multiple platforms are similarly determined by a priority
value and a priority class/policy.
Currently in DPDK most threads operate at the OS-default priority level
but there are cases when increasing the priority is useful. For
example, high performance applications may require elevated priority
levels.
For these reasons, EAL will expose two priority levels which are named
suggestively "normal" and "realtime_critical" and are computed as
follows:
On Linux, the following mapping is created:
RTE_THREAD_PRIORITY_NORMAL corresponds to
* policy SCHED_OTHER
* priority value: (sched_get_priority_min(SCHED_OTHER) +
sched_get_priority_max(SCHED_OTHER))/2;
RTE_THREAD_PRIORITY_REALTIME_CRITICAL corresponds to
* policy SCHED_RR
* priority value: sched_get_priority_max(SCHED_RR);
On Windows, the following mapping is created:
RTE_THREAD_PRIORITY_NORMAL corresponds to
* class NORMAL_PRIORITY_CLASS
* priority THREAD_PRIORITY_NORMAL
RTE_THREAD_PRIORITY_REALTIME_CRITICAL corresponds to
* class REALTIME_PRIORITY_CLASS (when running with privileges)
* class HIGH_PRIORITY_CLASS (when running without privileges)
* priority THREAD_PRIORITY_TIME_CRITICAL
Note that on Linux the resulting priority value will be 0, in
accordance to the documentation that mention the value should be 0 for
SCHED_OTHER policy.
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
A sequence lock (seqlock) is a synchronization primitive which allows
for data-race free, low-overhead, high-frequency reads, suitable for
data structures shared across many cores and which are updated
relatively infrequently.
A seqlock permits multiple parallel readers. A spinlock is used to
serialize writers. In cases where there is only a single writer, or
writer-writer synchronization is done by some external means, the
"raw" sequence counter type (and accompanying rte_seqcount_*()
functions) may be used instead.
To avoid resource reclamation and other issues, the data protected by
a seqlock is best off being self-contained (i.e., no pointers [except
to constant data]).
One way to think about seqlocks is that they provide means to perform
atomic operations on data objects larger than what the native atomic
machine instructions allow for.
DPDK seqlocks (and the underlying sequence counters) are not
preemption safe on the writer side. A thread preemption affects
performance, not correctness.
A seqlock contains a sequence number, which can be thought of as the
generation of the data it protects.
A reader will
1. Load the sequence number (sn).
2. Load, in arbitrary order, the seqlock-protected data.
3. Load the sn again.
4. Check if the first and second sn are equal, and even numbered.
If they are not, discard the loaded data, and restart from 1.
The first three steps need to be ordered using suitable memory fences.
A writer will
1. Take the spinlock, to serialize writer access.
2. Load the sn.
3. Store the original sn + 1 as the new sn.
4. Perform load and stores to the seqlock-protected data.
5. Store the original sn + 2 as the new sn.
6. Release the spinlock.
Proper memory fencing is required to make sure the first sn store, the
data stores, and the second sn store appear to the reader in the
mentioned order.
The sn loads and stores must be atomic, but the data loads and stores
need not be.
The original seqlock design and implementation was done by Stephen
Hemminger. This is an independent implementation, using C11 atomics.
For more information on seqlocks, see
https://en.wikipedia.org/wiki/Seqlock
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
musl lacks __ppc_get_timebase() but has __builtin_ppc_get_timebase()
Signed-off-by: Duncan Bellamy <dunk@denkimushi.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
This patch fixes the following build failure seen on Ubuntu 16.04
with gcc 5.4.0 because of uninitialized variable:
[..]
examples/pipeline/cli.c:2853:9: error: 'session_id' may be used
uninitialized in this function [-Werror=maybe-uninitialized]
[..]
Fixes: 172254555f ("examples/pipeline: support packet mirroring")
Signed-off-by: Ali Alnubani <alialnu@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The device config script currently uses some defaults to configure
devices in a generic way.
With the addition of this option, users have more control over how
queues are configured.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Sunil Pai G <sunil.pai.g@intel.com>
The CQ (completion queue) descriptors were updated by hardware, and then
scanned by driver to retrieve hardware completion status.
This patch enhances robustness by following:
1. replace while (true) with a finite loop to avoid potential dead loop.
2. check the csq_head field in CQ descriptor to avoid status array
overflows.
Fixes: 2db4f0b823 ("dma/hisilicon: add data path")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
If no DMA request is completed, the ring_idx of the last completed
operation need returned by last_idx parameter. This patch adds
testcase for it.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Tested-by: Kevin Laatz <kevin.laatz@intel.com>
If no DMA request is completed, the ring_idx of the last completed
operation need returned by last_idx parameter. This patch fixes it.
Fixes: 2db4f0b823 ("dma/hisilicon: add data path")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
This patch adds force minimal copy size parameter
(-m/--force-min-copy-size), so when do copy by CPU or DMA, the real copy
size will be the maximum of mbuf's data_len and this parameter.
This parameter was designed to compare the performance between CPU copy
and DMA copy. User could send small packets with a high rate to drive
the performance test.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
The Tx drop statistic was designed to be collected by
rte_eth_dev_tx_buffer mechanism, but the application uses
rte_eth_tx_burst to send packets and this lead the Tx drop statistic
was not collected.
This patch removes rte_eth_dev_tx_buffer mechanism to fix the problem.
Fixes: 632bcd9b5d ("examples/ioat: print statistics")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
The MTU in dma App can be configured by 'max_frame_size' parameters which
have a default value(1518). It's not reasonable to use it directly as MTU.
This patch fix it.
Fixes: 1bb4a528c4 ("ethdev: fix max Rx packet length")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Telemetry commands are now registered through the dmadev library
for the gathering of DSA stats. The corresponding callback
functions for listing dmadevs and providing info and stats for a
specific dmadev are implemented in the dmadev library.
An example usage can be seen below:
Connecting to /var/run/dpdk/rte/dpdk_telemetry.v2
{"version": "DPDK 22.03.0-rc2", "pid": 2956551, "max_output_len": 16384}
Connected to application: "dpdk-dma"
--> /
{"/": ["/", "/dmadev/info", "/dmadev/list", "/dmadev/stats", ...]}
--> /dmadev/list
{"/dmadev/list": [0, 1]}
--> /dmadev/info,0
{"/dmadev/info": {"name": "0000:00:01.0", "nb_vchans": 1, "numa_node": 0,
"max_vchans": 1, "max_desc": 4096, "min_desc": 32, "max_sges": 0,
"capabilities": {"mem2mem": 1, "mem2dev": 0, "dev2mem": 0, ...}}}
--> /dmadev/stats,0,0
{"/dmadev/stats": {"submitted": 0, "completed": 0, "errors": 0}}
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Tested-by: Sunil Pai G <sunil.pai.g@intel.com>
Tested-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
Clarify that once an operation has completed, the output of that
operation is visible to all cores.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
A previous fix had #else instead of #endif.
The error message is:
kernel/linux/kni/kni_net.c: In function ‘kni_net_rx_normal’:
kernel/linux/kni/kni_net.c:448:2: error: #else after #else
Bugzilla ID: 1025
Fixes: c98600d4be ("kni: fix build with Linux 5.18")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
ESP item is not supported on Windows, yet it is expanded from the
expansion graph when trying to create default flow to RSS all packets.
Support ESP item match (without ability to match on SPI field on Windows).
Split ESP validation per OS.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The mlx5_action_construct_data structure memory is managed by ipool
named acts_ipool.
The size of one entry in this ipool is mistakenly defined as size of
rte_flow_hw structure.
This size is used to reset in the allocated part. When the size is
incorrect it resets memory that does not belong to it.
This patch defines the correct size.
Fixes: f13fab2392 ("net/mlx5: add flow jump action")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
While non-lcore list operations were supported, non-lcore index will
be converted to MLX5_LIST_NLCORE. In that case, no need to check the
lcore index be -1 or not anymore.
This commit removes the unused lcore check in list.
Fixes: 7e1cf89271 ("common/mlx5: support list non-lcore operations")
Cc: stable@dpdk.org
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Kernel iavf driver has sent patch to increase the completion
wait time to reduce the "Reset never finished" case.
Follow this action in DPDK iavf driver.
Kernel reference commit:
8e3e4b9da7e6 ("iavf: increase reset complete wait time")
Fixes: 22b123a36d ("net/avf: initialize PMD")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
