The rte_eth_dev_set_vlan_offload function will check vlan rx offload
capability, the i40e vf has vlan filter feature but
DEV_RX_OFFLOAD_VLAN_FILTER is not set into the capability, that will
cause setting fail. So need to add this capability in
i40e_vf_representor_dev_infos_get function.
Fixes: e0cb96204b71 ("net/i40e: add support for representor ports")
Cc: stable@dpdk.org
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some global variables can indeed be static, add static keyword to them.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The representor id is added in rte_eth_dev_data in order to be able
to match a port with its representor id in devargs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
The PCI mapping requires to know the PCI driver to use,
even before the probing is done. That's why the PCI driver is
referenced early inside the PCI device structure. See
commit 1d20a073fa5e ("bus/pci: reference driver structure before mapping")
However the rte_driver does not need to be referenced in rte_device
before the device probing is done.
By moving back this assignment at the end of the device probing,
it becomes possible to make clear the status of a rte_device.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
In former API, ETH_TXQ_FLAGS_NOMULTSEGS was merely a hint indicating
that application will never send multisegmented packets, allowing
pmd to choose different tx methods accordingly.
In new API, DEV_TX_OFFLOAD_MULTI_SEGS became an offload capability
that is advertised by pmds, some of them do not advertise it and
expect to never receive fragmented packets (octeontx, axgbe)
So an ethdev that supports multisegmented packets should properly
advertise it.
Problem was spotted and tested on e1000, should be also present in
i40e_vf representor.
Fixes: e0cb96204b71 ("net/i40e: add support for representor ports")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Cleanup remain dependency on old rxmode flags since we move to
new offload APIs.
Fixes: c3ac7c5b0b8a ("net/i40e: convert to new Rx offloads API")
Fixes: e0cb96204b71 ("net/i40e: add support for representor ports")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The resetting of stats on a VF involves the setting of an offset
that is subtracted from future calls, rather zeroing of counters.
However doing a stats reset on the port representor was also
adjusting the values forwarded to the VF, which had the effect of
corrupting the VF's counters. The fix is for the port representor
to maintain its own stats offset, so the port representor and VF
maintain independently-resettable counters.
Fixes: e0cb96204b71 ("net/i40e: add support for representor ports")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds Rx and Tx burst functions to the i40e Port
Representors, so that the implementation within this PMD
can be tested using applications such as testpmd which
require data-path functionality.
Fixes: e0cb96204b71 ("net/i40e: add support for representor ports")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Since we move to new offload APIs, txq_flags is no long needed.
This patch remove the dependence on that.
Fixes: 7497d3e2f777 ("net/i40e: convert to new Tx offloads API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Add support for virtual function representor ports to the i40e PF
driver. When SR-IOV virtual functions devices are enabled a
corresponding representor port for each VF can be enabled, in the
process in which the i40e PMD is running, by specifying the
representor devargs with the list of VF ports that representors
are to be created for.
An example of the devargs which would create VF representor for virtual
functions 0,2,4,5,6 and 7 is:
-w DBDF,representor=[0,2,4-7]
and to just specify a single representor on virtual function 3 (switch
port id):
-w DBDF,representor=3
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
