The patch adds the GENEVE rte flow option length support to
command line interpreter. The flow command with GENEVE
option items looks like:
flow create 0 ingress pattern eth / ipv4 / udp / geneve vni
is 100 optlen is 2 / end actions drop / end
The option length should be specified in 32-bit words, this
value specifies the all options length in the GENEVE header.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The patch adds the GENEVE option rte flow item support to
command line interpreter. The flow command with GENEVE
option items looks like:
flow create 0 ingress pattern eth / ipv4 / udp / geneve vni is 100 /
geneve-opt class is 99 length is 1 type is 0 data is 0x669988 /
end actions drop / end
The option length should be specified in 32-bit words, this
value specifies the length of the data pattern/mask arrays (should be
multiplied by sizeof(uint32_t) to be expressed in bytes. If match
on the length itself is not needed the mask should be set to zero, in
this case length is used to specify the pattern/mask array lengths only.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The Geneve tunneling protocol is designed to allow the
user to specify some data context on the packet.
The GENEVE TLV (Type-Length-Variable) Option
is the mean intended to present the user data.
In order to support GENEVE TLV Option the new rte_flow
item "rte_flow_item_geneve_opt" is added.
The new item contains the values and masks for the
following fields:
-option class
-option type
-length
-data
New item will be added to testpmd to support match and
raw encap/decap actions.
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition.
If the Ether overhead is larger than 18 when it supports VLAN tag,
that will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will normalize the boundary condition with 'RTE_ETHER_MTU'
and overhead even though current overhead is 18.
Fixes: 9f1c00266d82 ("net/liquidio: add API to set MTU")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition.
If the Ether overhead is larger than 18 when it supports VLAN tag,
that will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU',
that perhaps impacts the cases of the jumbo frame related.
Fixes: d4a27a3b092a ("nfp: add basic features")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition.
If the Ether overhead is larger than 18 when it supports VLAN tag,
that will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will normalize the boundary condition with 'RTE_ETHER_MTU'
and overhead even though current overhead is 18.
Fixes: 254bd849b132 ("net/hinic: set jumbo frame offload flag")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition.
If the Ether overhead is larger than 18 when it supports VLAN tag,
that will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will normalize the boundary condition with 'RTE_ETHER_MTU'
and overhead even though current overhead is 18.
Fixes: 5d5589b0c858 ("net/enetc: support MTU update and jumbo frames")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition.
If the Ether overhead is larger than 18 when it supports VLAN tag,
that will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will normalize the boundary condition with 'RTE_ETHER_MTU'
and overhead even though current overhead is 18.
Fixes: b58d8781fa1f ("net/axgbe: support setting MTU")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition.
If the Ether overhead is larger than 18 when it supports VLAN tag,
that will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will normalize the boundary condition with 'RTE_ETHER_MTU'
and overhead even though current overhead is 18.
Fixes: 4b2eff452d2e ("cxgbe: enable jumbo frames")
Fixes: 0ec33be4c857 ("cxgbe: allow to change mtu")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition.
If the Ether overhead is larger than 18 when it supports VLAN tag,
that will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will normalize the boundary condition with 'RTE_ETHER_MTU'
and overhead even though current overhead is 18.
Fixes: 59d0ecdbf0e1 ("ethdev: MTU accessors")
Fixes: 95a27b3ba5f5 ("net/ixgbe: enable jumbo frame for VF")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: 65d9804edc05 ("net/thunderx: support MTU configuration")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports VLAN tag.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU',
that perhaps impacts the cases of the jumbo frame related.
Fixes: ff6a1197c3b1 ("net/sfc: convert to new Rx offload API")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: 200645ac7909 ("net/qede: set MTU")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: 0e2efd02db58 ("net/octeontx2: add MTU set operation")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: 3151e6a687a3 ("net/octeontx: support MTU")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: 70d6b7f550f4 ("net/ipn3ke: add representor")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: 84dc7a95a2d3 ("net/ice: enable flow director engine")
Fixes: 1b009275e2c8 ("net/ice: add Rx queue init in DCF")
Fixes: ae2bdd0219cb ("net/ice: support MTU setting")
Fixes: 50370662b727 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: 3fd7a3719c66 ("net/avf: enable ops for MTU setting")
Fixes: 69dd4c3d0898 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: c1715402df8f ("i40evf: fix jumbo frame support")
Fixes: 43e5488c0ac6 ("net/i40e: support MTU configuration")
Fixes: a778a1fa2e4e ("i40e: set up and initialize flow director")
Fixes: c3ac7c5b0b8a ("net/i40e: convert to new Rx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports dual VLAN tags.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'HSN3_DEFAULT_FRAME_LEN',
that perhaps impacts the cases of the jumbo frame related.
Fixes: 1f5ca0b460cd ("net/hns3: support some device operations")
Fixes: a5475d61fa34 ("net/hns3: support VF")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Lijun Ou <oulijun@huawei.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports VLAN tag.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: ef990fb56e55 ("net/e1000: convert to new Rx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports VLAN tag.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: e16408499412 ("net/dpaa2: configure jumbo frames")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The jumbo frame uses the 'RTE_ETHER_MAX_LEN' as boundary condition,
but the Ether overhead is larger than 18 when it supports VLAN tag.
That will cause the jumbo flag rx offload is wrong when MTU size is
'RTE_ETHER_MTU'.
This fix will change the boundary condition with 'RTE_ETHER_MTU' and
overhead, that perhaps impacts the cases of the jumbo frame related.
Fixes: 25f854197abc ("net/dpaa: support jumbo frames")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When the max rx packet length is smaller than the sum of mtu size and
ether overhead size, it should be enlarged, otherwise the VLAN packets
will be dropped.
Removed the rx_offloads assignment for jumbo frame during command line
parsing, and set the correct jumbo frame flag if MTU size is larger than
the default value 'RTE_ETHER_MTU' within 'init_config()'.
Fixes: 384161e00627 ("app/testpmd: adjust on the fly VLAN configuration")
Fixes: 35b2d13fd6fd ("net: add rte prefix to ether defines")
Fixes: ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
Fixes: 150c9ac2df13 ("app/testpmd: update Rx offload after setting MTU")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Ethdev is using default Ethernet overhead to decide if provided
'max_rx_pkt_len' value is bigger than max (non jumbo) MTU value,
and limits it to MAX if it is.
Since the application/driver used Ethernet overhead is different than
the ethdev one, check result is wrong.
If the driver is using Ethernet overhead bigger than the default one,
the provided 'max_rx_pkt_len' is trimmed down, and in the driver when
correct Ethernet overhead is used to convert back, the resulting MTU is
less than the intended one, causing some packets to be dropped.
Like,
app -> max_rx_pkt_len = 1500/*mtu*/ + 22/*overhead*/ = 1522
ethdev -> 1522 > 1518/*MAX*/; max_rx_pkt_len = 1518
driver -> MTU = 1518 - 22 = 1496
Packets with size 1497-1500 are dropped although intention is to be able
to send/receive them.
The fix is to make ethdev use the correct Ethernet overhead for port,
instead of default one.
Fixes: 59d0ecdbf0e1 ("ethdev: MTU accessors")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add txgbe PMD new features in release notes,
update user guide in txgbe.rst for flow API and traffic manager.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The AVF can support to enable / disable CRC strip, so it needs to adjust
the statistics calculation for ibytes according to offload setting.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Until the new eCPRI PTYPE be added into the RTE lib, just mapping eCPRI
to the PTYPE of RTE_PTYPE_L4_UDP in iavf pmd.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Until the new eCPRI PTYPE be added into the RTE lib, just mapping eCPRI
to the PTYPE of RTE_PTYPE_L4_UDP in ice pmd.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
A field ID passed to the API may point to a gap in the array
of field descriptors. Turn down such invocations as improper.
Fixes: 370ed675a952 ("common/sfc_efx/base: support setting PPORT in match spec")
Cc: stable@dpdk.org
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
The helper exits once it encounters a field which hasn't its
capability status reported by the FW. Handle the corner case
when the two mask-value pairs match for the field, which, in
the absence of capability information, is sufficient to deem
the class unaffected by the field. Explain this in a comment.
Fixes: bb71f7e0a35a ("common/sfc_efx/base: add match specs class comparison API")
Cc: stable@dpdk.org
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
A particular FW version is aware of some set of match fields.
Depending on FW configuration and match specification type, a
known field may not necessarily be allowed to have a non-zero
mask. FW communicates such restrictions via field capabilities
MCDI. Newer FW may be aware of more fields. For such fields,
older FW simply does not report any capabilities.
A situation may occur when libefx is aware of a match field
which the FW is unaware of (eg., older FW), that is, FW does
not report capability status for this field. In this case,
libefx must consider such field as unsupported and demand
all-zeros mask for it when validating match specifications.
Currently, the helper in question simply exits and reports
that the specification is valid when it encounters a field
with no capability status available. This is clearly wrong.
Introduce the missing check to fix the problem.
Fixes: 34285fd0891d ("common/sfc_efx/base: add match spec validate API")
Cc: stable@dpdk.org
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
MPORT values derived by helper functions are little-endian.
At the same time, MCDIs which consume these values perform
one more host-order to little-endian conversion internally.
Fix the helper functions to return host-order MPORT values.
Fixes: 370ed675a952 ("common/sfc_efx/base: support setting PPORT in match spec")
Fixes: bb024542fffd ("common/sfc_efx/base: add API for adding action drop")
Fixes: 097058033f03 ("common/sfc_efx/base: add API to get mport of PF/VF")
Cc: stable@dpdk.org
Reported-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Request the driver for number of entries in the FEC caps
array and then dynamically allocate the array.
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add ethdev ops to query and configure link FEC.
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Rework and simplify link handling code. Remove redundant
variables in link configuration structure and directly
extract information from the 32-bit link capabilities.
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Remove legacy 16-bit link capabilities and always request for the
32-bit link capabilities from firmware.
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Start from index 0 when going through the FEC array. This will allow
"off" to get printed for RTE_ETH_FEC_NOFEC mode.
Fixes: b19da32e3151 ("app/testpmd: add FEC command")
Cc: stable@dpdk.org
Signed-off-by: Karra Satwik <kaara.satwik@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When calling rte_eth_promiscuous_enable(port_id) followed by
rte_eth_allmulticast_enable(port_id), the port is not in promisc mode
anymore. This patch ensures that promisc mode takes precedence over
allmulticast mode fixing the regression introduced by b10231aed1ed.
Fixes: b10231aed1ed ("net/qede: fix multicast drop in promiscuous mode")
Cc: stable@dpdk.org
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Refine the GTPU template to avoid incorrect header type be parsed.
Some indentation is adjusted.
Fixes: 38d632cbdc88 ("net/ice: refactor PF RSS")
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add new UDP tunnel port params for eCPRI configuration, the command
as below:
testpmd> port config 0 udp_tunnel_port add ecpri 6789
testpmd> port config 0 udp_tunnel_port rm ecpri 6789
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add type of RTE_TUNNEL_TYPE_ECPRI into the enum of ethdev tunnel type.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds the translation function which
sets the qfi, PDU type.
The next extension header which indicates the following
extension header type is set to 0x85 - a PDU session
container.
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
In this patch we add validation routine for
GTP PSC extension header.
The GTP PSC extension header must follow the
GTP item.
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This is a preparation step to support GTP extension header.
In this patch we add the matcher fields that will be
used to match on the GTP extension header.
Signed-off-by: Shiri Kuzin <shirik@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This patch add support for generating GTP PDU container
session option for the raw encap and raw decap sets.
The generated options is single 32-bit word with
minimal length specified as 4, no extra fields in the
option are supported. The option item must be preceded
with the GTP item itself, and GTP item flags must be
set accordingly:
- E flag must be set, we are going to provide extension
- S flag must be reset, because GTP item does not
provide the value for SQN field, we can't fill this one
- PN flag must be reset, no N-PDU value provided by
GTP item either
The raw set example:
set raw_encap 2 eth / ipv4 / udp /
gtp v_pt_rsv_flags is 0x34 / gtp_psc / end_set
Please, note - value 0x34 provides the required flag combination.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch introduces the GTP header individual flag bit fields
and the header optional word with N-PDU number, Sequence Number
and Next Extension Header type.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In current version, procedure of saving eth_dev in
hns3 PMD init will be called more than twice, one
for primary, the other for secondary. That will cause
segmentation fault in Multi-process as eth_dev will
be changed in secondary process, which is different
from one in primary process.
The initial problem was access to 'rte_eth_devices'
global variable, which is wrong. But current approach
can cause problem for the secondaries, moving 'eth_dev'
to process private can work but before making things
more complex.
This patch deserted the procedure of saving eth_dev in
hns3 PMD init. Instead, it creates an internal function
that gets "struct hns3_hw" as parameter and it can be
called internally without knowing 'eth_dev'and the
.dev_ops can be wrapper to this.
Fixes: 2390bf217f4d ("net/hns3: fix FEC state query")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Abnormal errors stats in Rx/Tx datapath are statistics
items in driver, and displayed in xstats. They should
be cleared by the rte_eth_xstats_reset api, instead of
the rte_eth_stats_reset.
Fixes: c4b7d6761d01 ("net/hns3: get Tx abnormal errors in xstats")
Fixes: 521ab3e93361 ("net/hns3: add simple Rx path")
Fixes: bba636698316 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
