Add xstats_get() and xstats_reset() functions to igb
driver, and the necessary strings to expose these
NIC statistics.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
simple rx/tx func is chose when merge-able rx is disabled and user
specifies single segment and no offload support.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Bulk free of mbufs when clean used ring.
Shift operation of idx could be saved if vq_free_cnt means
free slots rather than free descriptors.
TODO: rearrange vq data structure, pack the stats var together so that
we could use one vec instruction to update all of them.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
With fixed avail ring, we don't need to get desc idx from avail ring.
virtio driver only has to deal with desc ring.
This patch uses vector instruction to accelerate processing desc ring.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Add software RX ring in virtqueue.
Add fake_mbuf in virtqueue for wraparound processing.
Fill avail ring with blank mbufs in virtio_dev_vring_start
Add virtio_rxtx.h header file for RTE_VIRTIO_PMD_MAX_BURST.
Would move all rx/tx related declarations into this header file in future.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
In DPDK based switching environment, mostly vhost runs on a dedicated core
while virtio processing in guest VMs runs on different cores.
Take RX for example, with generic implementation, for each guest buffer,
a) virtio driver allocates a descriptor from free descriptor list
b) modify the entry of avail ring to point to allocated descriptor
c) after packet is received, free the descriptor
When vhost fetches the avail ring, it need to fetch the modified L1 cache from
virtio core, which is a heavy cost in current CPU implementation.
This idea of this optimization is:
allocate the fixed descriptor for each entry of avail ring, so avail ring will
always be the same during the run.
This removes L1M cache transfer from virtio core to vhost core for avail ring.
(Note we couldn't avoid the cache transfer for descriptors).
Besides, descriptor allocation and free operation is eliminated.
This also makes vector procesing possible to further accelerate the processing.
This is the layout for the avail ring(take 256 ring entries for example), with
each entry pointing to the descriptor with the same index.
avail
idx
+
|
+----+----+---+-------------+------+
| 0 | 1 | 2 | ... | 254 | 255 | avail ring
+-+--+-+--+-+-+---------+---+--+---+
| | | | | |
| | | | | |
v v v | v v
+-+--+-+--+-+-+---------+---+--+---+
| 0 | 1 | 2 | ... | 254 | 255 | desc ring
+----+----+---+-------------+------+
|
|
+----+----+---+-------------+------+
| 0 | 1 | 2 | | 254 | 255 | used ring
+----+----+---+-------------+------+
|
+
This is the ring layout for TX.
As we need one virtio header for each xmit packet, we have 128 slots available.
++
||
||
+-----+-----+-----+--------------+------+------+------+
| 0 | 1 | ... | 127 || 128 | 129 | ... | 255 | avail ring
+--+--+--+--+-----+---+------+---+--+---+------+--+---+
| | | || | | |
v v v || v v v
+--+--+--+--+-----+---+------+---+--+---+------+--+---+
| 128 | 129 | ... | 255 || 128 | 129 | ... | 255 | desc ring for virtio_net_hdr
+--+--+--+--+-----+---+------+---+--+---+------+--+---+
| | | || | | |
v v v || v v v
+--+--+--+--+-----+---+------+---+--+---+------+--+---+
| 0 | 1 | ... | 127 || 0 | 1 | ... | 127 | desc ring for tx dat
+-----+-----+-----+--------------+------+------+------+
||
||
++
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Vector RX function will process 4 packets at a time. When the RX
ring wrapps to the tail and the left descriptor size is not multiple
of 4, SW will overwrite memory that not belongs to it and cause crash.
The fix will allocate additional 4 HW/SW spaces at the tail to avoid
overwrite.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Add func fm10k_set_tx_function to decide the best TX func in
fm10k_dev_tx_init.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Vector TX use different way to manage TX queue, it's necessary
to use different functions to reset TX queue and release mbuf
in TX queue. So, introduce 2 function pointers to do such ops.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Since Vector RX use different variables to trace RX HW ring, it
leads to need different func to release mbuf properly.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
This patch add below functions:
1. Add function fm10k_rxq_rearm to re-allocate mbuf for used desc
in RX HW ring.
2. Add 2 functions, in which using SSE instructions to parse RX desc
to get pkt_type and ol_flags in mbuf.
3. Add func fm10k_recv_raw_pkts_vec to parse raw packets, in which
includes possible chained packets.
4. Add func fm10k_recv_pkts_vec to receive single mbuf packet.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Add new function fm10k_params_init to initialize all fm10k related
variables.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Add condition check in rx_queue_setup func. If number of RX desc
can't satisfy vPMD requirement, record it into a variable. Or
call fm10k_rxq_vec_setup to initialize Vector RX.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Add new file fm10k_rxtx_vec.c and add it into compiling.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
According to XL710 datasheet:
RX QLEN restrictions: When the PXE_MODE flag in the GLLAN_RCTL_0
register is cleared, the QLEN must be whole number of 32
descriptors.
TX QLEN restrictions: When the PXE_MODE flag in the GLLAN_RCTL_0
register is cleared, the QLEN must be whole number of 32
descriptors.
So make sure that for both RX and TX queues number of HW descriptors is
a multiple of 32.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds fills bonding port's stats with a sum of corresponding
values taken from bonded slaves, when stats are requested for bonding port.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This implementation allows to set and read RSS configuration for null
device, and is used to validate right values propagation over the slaves,
in test units for dynamic RSS configuration for bonding.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
This patch adds a possibility to configure more than one queue on null
device.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
This patch initializes eth_dev->link_intr_cbs queue used when null pmd is
added to the bonding.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Bonding device implements independent management of RSS settings. It
stores its own copies of settings i.e. RETA, RSS hash function and RSS
key. It’s required to ensure consistency.
1) RSS hash function set for bonding device is maximal set of RSS hash
functions supported by all bonded devices. That mean, to have RSS support
for bonding, all slaves should be RSS-capable.
2) RSS key is propagated over the slaves "as is".
3) RETA for bonding is an internal table managed by bonding API, and is
used as a pattern to set up slaves. Its size is GCD of all RETA sizes, so
it can be easily used as a pattern providing expected behavior, even if
slaves RETA sizes are different.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Add separate functions to configure VMDQ and RSS.
Update dglort map and logic ports accordingly.
Reset MAC/VLAN filter after VMDQ config was changed.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
The patch does below things for fm10k MAC/VLAN filter:
- Add separate functions for VMDQ and main VSI to change
MAC filter.
- Disable modification to VLAN filter in VMDQ mode.
- In device close phase, delete logic ports to remove all
MAC/VLAN filters belonging to those ports.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Add multi-queue checking in device configure function.
Currently, VMDQ and RSS are supported.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
This patch adds one new API to get dcb related info.
rte_eth_dev_get_dcb_info
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch enables DCB+RSS multi-queue mode, and also fix some coding
style.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch enables DCB feature on Intel XL710/X710 NICs. It includes:
Receive queue classification based on traffic class
Round Robin ETS schedule (rx and tx)
Priority flow control
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Different NIC has its specific constraint on the multi-queue
configuration, so move the checking from ethdev lib to drivers.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Add interrupts handler for port status notification.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Seen with GCC < 4.6:
error: unknown field ‘tcp_udp’ specified in initializer
error: extra brace group at end of initializer
Static initialization of anonymous structs/unions is a C11 feature
properly supported only since GCC 4.6.
Work around compilation errors with older versions by expanding
struct ibv_exp_flow_spec into struct hash_rxq_init.
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Normal flows do not currently provide IPv6 support.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Only a single flow per hash RX queue is needed in promiscuous mode.
Disable others to free up hardware resources.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
DPDK expects to have an RSS hash key per flow type (IPv4, IPv6, UDPv4,
etc.), to handle this the PMD must keep a table of hash keys to be able
to reconfigure the queues at each start/stop call.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
First implementation of rss_hash_update and rss_hash_conf_get, those
functions still lack in functionality but are usable to change the RSS
hash key. For now, the PMD does not handle an indirection table for
each kind of flow (IPv4, IPv6, etc.), the same RSS hash key is used
for all protocols. This situation explains why the rss_hash_conf_get
returns the RSS hash key for all DPDK supported protocols and why the
hash key is set for all of them too.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Promiscuous and allmulticast modes were historically enabled by adding
specific flows with types IBV_FLOW_ATTR_ALL_DEFAULT or
IBV_EXP_FLOW_ATTR_MC_DEFAULT to each hash RX queue, but this method is
deprecated.
- Promiscuous mode is now enabled by omitting destination MAC addresses from
basic flow specifications.
- Allmulticast mode is now enabled by using flow specifications that match
the broadcast bit in destination MAC addresses.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
All hash RX QPs currently use the same flow steering rule (L2 MAC filtering)
regardless of their type (TCP, UDP, IPv4, IPv6), which prevents them from
being dispatched properly. This is fixed by adding flow information to the
hash RX queue initialization data and generating specific flow steering
rules for each of them.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
