The return value of rte_eth_macaddr_get() was changed from void to int.
Update the usage of the functions according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
ethdev layer introduced checks for application requested RSS hash
functions and returns error for ones unsupported by hardware
This check breaks some sample applications which blindly configures
RSS hash functions without checking underlying hardware support.
Updated examples to mask out unsupported RSS has functions during device
configuration.
Prints a log if configuration values updated by this check.
Fixes: aa1a6d87f15d ("ethdev: force RSS offload rules again")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Meijuan Zhao <meijuanx.zhao@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application assume a valid port index is in the range [0..count[.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be valid
- old ports being detached (RTE_ETH_DEV_UNUSED) can be valid
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the function rte_eth_dev_is_valid_port.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Increase the default RX/TX ring sizes to 1024/1024 to
accommodate for NICs with higher throughput (25G, 40G etc)
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
All PCI functionality should be hidden from apps via the PCI bus driver,
the EAL and individual device drivers. Therefore remove the inclusion of
rte_pci.h from sample apps.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The rte_eth_dev_count() function will never return a value greater
than RTE_MAX_ETHPORTS, so that checking is useless.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, the example vmdq_dcb only works on Intel(R) 82599 NICs.
This patch extends this sample to make it work both on Intel(R) 82599
and X710/XL710 NICs by making the following changes:
1. add VMDQ base queue checking to avoid forwarding on PF queues.
2. assign each VMDQ pool to a MAC address.
3. add more arguments (nb-tcs, enable-rss) to change the default
setting
4. extend the max number of queues from 128 to 1024.
This patch also reworks the user guide for the vmdq_dcb sample.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Latest mbuf changes (priv_size addition and related fixes)
exposed small problem with testpmd and few other sample apps:
when mbuf size is exaclty 2KB or less, that causes
ixgbe PMD to select scattered RX even for configs with 'normal'
max packet length (max_rx_pkt_len == ETHER_MAX_LEN).
To overcome that problem and unify the code, new macro was created
to represent recommended minimal buffer length for mbuf.
When appropriate, samples are updated to use that macro.
Fixes: dfb03bbe2b ("app/testpmd: use standard functions to initialize
mbufs and mbuf pool")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When it's possible, use the new helper to create the mbuf pools.
Most of the patch is trivial, except for the following files that
have some specifics (indirect mbufs):
- ip_fragmentation
- ip_pipeline
- ipv4_multicast
- vhost
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
For apps that were using default rte_eth_rxconf and rte_eth_txconf
structures, these have been removed and now they are obtained by
calling rte_eth_dev_info_get, just before setting up RX/TX queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the ixgbe pmd driver to use the PMD_REGISTER_DRIVER macro.
This means that the test applications now have no reference to the ixgbe library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
