Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This Tx counter has never been used.
Fixes: 9658d17da27b ("virtio: maintain stats per queue")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Replace rte_intr_enable() with rte_intr_ack() API
for acking an interrupt in interrupt handlers and
rx_queue_intr_enable() callbacks of PMD's.
This is inline with original intent of this change in PMDs
to ack interrupts after handling is completed if
device is backed by UIO, IGB_UIO or VFIO(with INTx).
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Virtio requires pseudo-header checksum in TCP/UDP checksum to do
offload, but it was lost when Tx prepare is introduced. Also
rte_validate_tx_offload() should be used to validate Tx offloads.
Also it is incorrect to do virtio_tso_fix_cksum() after prepend
to mbuf without taking prepended size into account, since layer 2/3/4
lengths provide incorrect offsets after prepend.
Fixes: 4fb7e803eb1a ("ethdev: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Dilshod Urazov <dilshod.urazov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Set RTE_ETH_DEV_CLOSE_REMOVE upon probe so all the private
resources for the port can be freed by rte_eth_dev_close().
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We should unmap the device when we failed to initialize the device.
Fixes: 6ba1f63b5ab0 ("virtio: support specification 1.0")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
For legacy devices, we should also unmap the port IO
resource on device removal.
Fixes: b8f04520ad71 ("virtio: use PCI ioport API")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We should free queues when we failed to initialize the virtio device.
Fixes: 26b683b4f7d0 ("net/virtio: setup Rx queue interrupts")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When eth_virtio_dev_init() is cleaning up, it does not correctly set
the mac_addrs variable to NULL, which will lead to a double free.
Found during unit-test fixes.
Fixes: 43d18765c027 ("net/virtio: fix memory leak on failure")
Cc: stable@dpdk.org
Reported-by: Michael Santana <msantana@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
We are consistently passing 1 as the argument in the data path,
so there is no need to define avail/used flags as function-like
macros anymore. This patch changes the avail and used flags to
constants. And a frequently used combination is also introduced.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixes the multi-process support for virtio-user.
Currently virtio-user just provides some limited secondary
process supports. Only some basic operations can be done in
secondary process on virtio-user port, e.g. getting port stats.
Actions which will trigger the communication with vhost backend
can't be done in secondary process for now, as the fds are
not synced between processes. The processing of server mode
devargs is also moved into virtio_user_dev_init().
Fixes: cdb068f031c6 ("bus/vdev: scan by multi-process channel")
Fixes: ee27edbe0c10 ("drivers/net: share vdev data to secondary process")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add a helper for sending commands in split ring to make the
code consistent with the corresponding code in packed ring.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Drop the unused field tx_indir_pq from virtio_tx_region
structure.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Drop redundant suffix (_packed and _event) from the fields in
packed ring structure.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Put split ring and packed ring specific fields into separate
sub-structures, and also union them as they won't be available
at the same time.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Cache the AVAIL, USED and WRITE bits to avoid calculating
them as much as possible. Note that, the WRITE bit isn't
cached for control queue.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Typically, after enabling Rx interrupt, a check should be done
to make sure that there is no new incoming packets before going
to sleep. So a barrier is needed to make sure that any following
check won't happen before the interrupt is actually enabled.
Fixes: c056be239db5 ("net/virtio: add Rx interrupt enable/disable functions")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When IN_ORDER feature is negotiated, device may just write out a
single used descriptor for a batch of buffers:
"""
Some devices always use descriptors in the same order in which they
have been made available. These devices can offer the VIRTIO_F_IN_ORDER
feature. If negotiated, this knowledge allows devices to notify the
use of a batch of buffers to the driver by only writing out a single
used descriptor with the Buffer ID corresponding to the last descriptor
in the batch.
The device then skips forward in the ring according to the size of the
batch. The driver needs to look up the used Buffer ID and calculate the
batch size to be able to advance to where the next used descriptor will
be written by the device.
"""
But the Tx path of packed ring can't handle this. With this patch,
when IN_ORDER is negotiated, driver will manage the IDs linearly,
look up the used buffer ID and advance to the next used descriptor
that will be written by the device.
Fixes: 892dc798fa9c ("net/virtio: implement Tx path for packed queues")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This minor cleanup patch removes an unnecessary forward
declaration of virtio_intr_enable() in net/virtio PMD.
Fixes: fe19d49cb525 ("net/virtio: fix Rx interrupt with VFIO")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Port configuration fails because offload flags don't match the expected
value when max-pkt-len is set to a value that should enable receive port
offloading but doesn't.
The .dev_infos_get callback can be called before the configure callback.
At that time we don't know the maximum packet size yet because it is
only set up when ports are started. So in virtio_dev_info_get() just
always set the jumbo packet offload flag.
Check the maximum packet length at device configure time, because then we
have access to the max-pkt-len value provided by the user. If the
max-pkt-len exceeds the maximum MTU supported by the device we remove
the VIRTIO_NET_F_MTU flag from requested features.
Fixes: a4996bd89c42 ("ethdev: new Rx/Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixed below issues in the packed ring based control
vq support in virtio user:
1. The idx_hdr should be used_idx instead of the id in the desc;
2. We just need to write out a single used descriptor for each
descriptor list;
3. The avail/used bits should be initialized to 0;
Meanwhile, make the function name consistent with other parts.
Fixes: 48a4464029a7 ("net/virtio-user: support control VQ for packed")
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch mainly fixed below issues in the packed ring based
control vq support in virtio driver:
1. When parsing the used descriptors, we have to track the
number of descs that we need to skip;
2. vq->vq_free_cnt was decreased twice for a same desc;
Meanwhile, make the function name consistent with other parts.
Fixes: ec194c2f1895 ("net/virtio: support packed queue in send command")
Fixes: a4270ea4ff79 ("net/virtio: check head desc with correct wrap counter")
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In virtio_pq_send_command() we check for a used descriptor
and wait in an idle loop until it becomes used. We can't use
vq->used_wrap_counter here to check for the first descriptor
we made available because the ring could have wrapped. Let's use
the used_wrap_counter that matches the state of the head descriptor.
Fixes: ec194c2f1895 ("net/virtio: support packed queue in send command")
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
VIRTIO_F_ORDER_PLATFORM is required to use proper memory barriers
in case of HW vhost implementations like vDPA.
DMA barriers (rte_cio_*) are sufficent for that purpose.
Previously known as VIRTIO_F_IO_BARRIER.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds support for in-order path when meargeable buffers
feature hasn't been negotiated.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Use packed virtqueue format when reading and writing descriptors
to/from the ring.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This implements the transmit path for devices with
support for packed virtqueues.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When a guest is spanned on multiple NUMA nodes and
multiple Virtio devices are spanned onto these nodes,
we expect that their ring memory is allocated in the
right memory node.
Otherwise, vCPUs from node A may be polling Virtio rings
allocated on node B, which would increase QPI bandwidth
and impact performance.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
In case of running with not enough capabilities, i.e. running as
non-root user any application linked with DPDK prints the message
about IOPL call failure even if it was just called like
'./testpmd --help'. For example, this breaks most of the OVS unit
tests if it built with DPDK support.
Let's register the virtio driver unconditionally and print error
message while probing the device. Silent iopl() call left in the
constructor to have privileges as early as possible as it was before.
Fixes: 565b85dcd9f4 ("eal: set iopl only when needed")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
.dev_uninit calls .dev_stop and .dev_close. The work that is done in
those routines doesn't need repeated. Use started and opened to track
the adapter's status.
Fixes: c1f86306a026 ("virtio: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We need to check the status field in virtio net config structure
instead of the bits read from ISR register to know whether we need
to do guest announce.
Fixes: 7365504f77e3 ("net/virtio: support guest announce")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Register and unregister the virtio interrupt handler when the device is
started and stopped. This allows a virtio device to be hotplugged or
unplugged.
Fixes: c1f86306a026 ("virtio: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Brian Russell <brussell@brocade.com>
Signed-off-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
With the enabling for hotplug on multi-process,
rte_eth_dev_pci_generic_remove can be used to detach the device from
a secondary process also. But we need to take care of the uninit callback
parameter to make sure it handles the secondary case correctly.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Instead of checking the multiple Virtio features bits for
every packet, let's do the check once at configure time and
store it in virtio_hw struct.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
This patch improves the Tx offload features selection depending
on whether the application request for offloads.
When the application doesn't request for Tx offload features,
the corresponding features bits aren't negotiated.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
The simple Tx path does not comply with the Virtio specification.
Now that VIRTIO_F_IN_ORDER feature is supported by the Virtio PMD,
let's use this optimized path instead.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
