In the existing implementation, the blockcipher test cases are being run
and reported as one test case per type, even though multiple test cases
are hidden in each. For example, "test_AES_chain_all" runs 46 test cases.
Each blockcipher type should have a testsuite instead.
The blockcipher testsuite is dynamically built, depending on the
blockcipher type chosen. The testcase struct is modified to allow
running a testcase with data, which is used for data required when
running each blockcipher testcase.
The blockcipher testsuites are added dynamically to parent testsuites
as sub-testsuites where needed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
The current structure for unit testing only allows for running a
test suite with nested test cases. This means all test cases for an
autotest must be in one suite, which is not ideal.
For example, in some cases we may want to run multiple lists of test
cases that each require different setup, so should be in separate suites.
The unit test suite struct is modified to hold a pointer to a list of
sub-testsuite pointers, along with the list of testcases as before.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Some small changes were made to the unit test suite runner for
readability and to enable reuse of some of the function in a later patch.
On test suite setup skip/fail, the loop to count testcases as
skipped/failed has been moved to another function.
This will allow for recursion in a later patch when nested sub-testsuites
are used.
The unit test suite runner accessed the list of testcases in the suite
structure every time the testcase was used. This is now replaced by a
testcase variable which improves readability.
A macro has been introduced for readability, instead of using open
coded loops.
Rather than keep local variable status counts for testcases,
these are added to the test suite structure.
The summary output now prints the suite name, this will be useful later
when multiple nested sub-testsuites are being run.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
While having the ability to run a test based off the DPDK_TEST
environment variable is useful, it's sometimes more convenient to
specify the test name as a commandline parameter to a test binary.
This patch adds support for checking all parameters after the EAL ones, and
running all valid autotests requested - either from DPDK_TEST or on the
commandline. This also allows multiple tests to be run in a single
automated session, which is useful for working with components which have
multiple test suites.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Remove RTE_TEST_TRACE_FAILURE macro definition from app/test/test.h
as it might be already defined and cause build problems.
Also it is good to leave the decision of additional logs to the final
user of test.h and rte_test.h
Fixes: 5afc521eac ("eal: add test assert macros")
Cc: stable@dpdk.org
Signed-off-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This commit adds an autotest which exercises new timer reset/stop APIs
in a secondary process. Timers are created, and sometimes stopped, in
the secondary process, and their expiration is checked for and handled
in the primary process.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Use eal's RTE_INIT abstraction for defining constructors.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we can move it back to where it all started in early
versions of DPDK - the "app/" folder.
This move has a couple of advantages:
* This reduces clutter at the top level of the project, due to one less
folder.
* It eliminates the separate build task necessary for building the
autotests using make "make test-build" which means that developers are
less likely to miss something in their own compilation tests
* It re-aligns the final location of the test binary in the app folder when
building with make with it's location in the source tree.
For meson builds, the autotest app is different from the other apps in that
it needs a series of different test cases defined for it for use by "meson
test". Therefore, it does not get built as part of the main loop in the
app folder, but gets built separately at the end.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This is to logically group unit tests into their own folder,
separating them from "app" folder.
Hopefully this will make the unit test in DPDK more visible.
Following binaries moved to "test" folder:
cmdline-test
test-acl
test-pipeline
test <-- various DPDK unit tests
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Following discussions on the mailing list [1] and since nobody stood up to
implement the necessary cleanups, here is the ivshmem integration removal.
There is not much to say about this patch, a lot of code is being removed.
The default configuration file for packet_ordering example is replaced with
the "native" x86 file.
The only tricky part is in eal_memory with the memseg index stuff.
More cleanups can be done after this but will come in subsequent patchsets.
[1]: http://dpdk.org/ml/archives/dev/2016-June/040844.html
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The log history feature was deprecated in 16.07.
The remaining empty functions are removed in 16.11.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
The tests are registered with their command name by adding a structure
to a list. The structure of each test was declared in each test file
and passed to the register macro.
This rework generate the structure inside the register macro.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
In order to compare buffers with length and offset in bits,
new macros have been created, which use the previous compare function
to compare full bytes and then, compare first and last bytes of
each buffer separately.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Instead of using the previous RTE_APP_TEST_DEBUG macro,
to dump memory when it was enabled (with rte_hexdump),
a new TEST_HEXDUMP is defined, which will call rte_hexdump
if RTE_LOG_LEVEL is set to RTE_LOG_DEBUG.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
unit tests are run by using cryptodev_qat_autotest or
cryptodev_aesni_autotest from the test apps interactive console.
performance tests are run by using the cryptodev_qat_perftest or
cryptodev_aesni_mb_perftest command from the test apps interactive
console.
If you which to run the tests on a QAT device there must be one
bound to igb_uio kernel driver.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: John Griffin <john.griffin@intel.com>
Signed-off-by: Des O Dea <des.j.o.dea@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Build app/test will be failed for function only defined but not used.
test_prefetch.c:65: error: ‘testfn_prefetch_cmd’ defined but not used
Add attribute used in test function declaration can fix this.
static void __attribute__((used)) testfn_##t(void);
Fixes: 727909c592 ("app/test: introduce dynamic commands list")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
One of the test assertion macros was missing the "do" part of the
do-while. This issue was picked up by clang reporting an empty while
loop body for the closing while of the do-while pair.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The unit test can be used to measure cycles per packet in different rx/tx routines.
The NIC works in loopback mode. So it doesn't require test equipment to measure throughput.
As result, the unit test shows the average cycles per packet consuming.
When doing the test, make sure the link is UP.
Usage Example:
1. Run unit test app in interactive mode
app/test -c f -n 4 -- -i
2. Run and wait for the result
pmd_perf_autotest
There's option to choose rx/tx pair, default is vector.
set_rxtx_mode [vector|scalar|full|hybrid]
Note: To get acurate scalar fast, please choose 'vector' or 'hybrid' without INC_VEC=y in config
It supports to measure standalone rx or tx.
Usage Example:
Choose rx or tx standalone, default is both
set_rxtx_anchor [rxtx|rxonly|txonly]
It also supports to measure standalone RX burst cycles.
In this way, it won't repeat re-send received packets.
Now it measures two situations, poll before/after xmit(w or w/o desc. cache conflict)
Usage Example:
Set stream control mode, by default is continuous
set_rxtx_sc [continuous|poll_before_xmit|poll_after_xmit]
Test report: http://dpdk.org/ml/archives/dev/2014-October/007145.html
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Yong Liu <yong.liu@intel.com>
Remove all tests from the builtin commands list and use the dynamic commands
list register macro.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch adds a way to dynamically add a test without modifying commands.c.
Move all current tests in a builtin_commands[] list, next patch will convert
them to this new system.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
- Adding common test assertion macros for unit testing
- Structs for encapsulating unit tests / test suites data.
- test suite runner method
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Including:
- code to generate packet bursts for testing rx and tx
functionality of bonded device
- virtual/stubbed out ethdev for use as slave ethdev in testing
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Unit tests for Packet Framework libraries.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Add a set of unit tests and some basic performance test for the
distributor library. These tests cover all the major functionality of
the library on both distributor and worker sides.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit introduces a new API for storing device arguments given by
the user. It only adds the framework and the test. The modification of
EAL to use this new module is done in next commit.
The final goals:
- unify pci-blacklist, pci-whitelist, and virtual devices arguments
in one file
- allow to register a virtual device driver from a dpdk extension
provided as a shared library. For that we will require to remove
references to rte_pmd_ring and rte_pmd_pcap in argument parsing code
- clarify the API of eal_common_whitelist.c, and rework its code that is
often complex for no reason.
- support arguments for PCI devices and possibly future non-PCI devices
(other than virtual devices) without effort.
Test result:
echo 100 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages
echo 100 > /sys/devices/system/node/node1/hugepages/hugepages-2048kB/nr_hugepages
./app/test -c 0x15 -n 3 -m 64
RTE>>eal_flags_autotest
[...]
Test OK
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some features are not available if LIBRTE_CMDLINE is disabled:
- interactive commands
- cmdline tests
Remove also cmdline_parse includes which are not needed.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add a file app/test/test_kvargs.c that checks the rte_kvargs API.
The test passes:
RTE>>kvargs
== test valid case ==
== test invalid case ==
PMD: Error parsing device, invalid key <wrong-key>
Test OK
I also tested that rte_eth_pcap runs with the following arguments:
./app/testpmd -c 0x15 -n 3 --proc-type=primary --huge-dir=/mnt/huge \
--use-device="eth_pcap0;iface=ixgbe0" \
-- -i --port-topology=chained
./app/testpmd -c 0x15 -n 3 --proc-type=primary --huge-dir=/mnt/huge \
--use-device="eth_pcap0;rx_iface=ixgbe0;rx_iface=ixgbe1;tx_iface=ixgbe0" \
-- -i --port-topology=chained
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
These library changes provide a new Intel DPDK feature for communicating
with virtual machines using QEMU's IVSHMEM mechanism.
The feature works by providing a command line for QEMU to map several hugepages
into a single IVSHMEM device. For the guest to know what is inside any given IVSHMEM
device (and to distinguish between Intel(R) DPDK and non-Intel(R) DPDK IVSHMEM
devices), a metadata file is also mapped into the IVSHMEM segment. No work needs to
be done by the guest application to map IVSHMEM devices into memory; they are
automatically recognized by the Intel(R) DPDK Environment Abstraction Layer (EAL).
Changes in this patch:
* Changes to EAL to allow mapping of all hugepages in a memseg into a single file
* Changes to EAL to allow ivshmem devices to be transparently mapped in
the process running on the guest.
* New ivshmem library to create and manage metadata exported to guest VM's
* New ivshmem compilation targets
* Mempool and ring changes to allow export of structures to a VM and allow
a VM to attach to those structures.
* New autotests to unit tests this functionality.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
