checkpatches.sh current complains on a patch [1] adding
ALLOW_EXPERIMENTAL_API in an example while this check is for app, lib
and drivers directories:
Warning in examples/ethtool/ethtool-app/Makefile:
Using experimental build flag for in-tree compilation
The regexp on entering files concerned by this filter is incorrect.
In the [1] case, the file full name is matched against "app" rather than
"+++ b/app".
1: https://patchwork.dpdk.org/patch/83902/
Fixes: 7413e7f2aeb3 ("devtools: alert on new calls to exit from libs")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Once it has been determined that an example cannot be built, there is
little point in continuing to process the meson.build file for that
example, so we can use subdir_done() to return to the calling file.
This can potentially prevent problems where later statement in the file
may cause an error on systems where the app cannot be built, e.g. on
Windows or FreeBSD.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
When librt is not present on a system, processing the meson.build file
for this example application causes an error. Make the library
non-mandatory and just mark the example as unbuildable if it is
not present.
Fixes: 89f0711f9ddf ("examples: build some samples with meson")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
By installing the examples one-by-one in a loop in the examples
meson.build file we effectively flattened out the structure of the examples
folder and omitted some common and shared subfolders that were never
directly built. Instead, we can remove the loop and just have the whole
"examples" folder installed as-is in a single statement, preserving its
directory structure, and thereby fixing the build of a number of the
examples.
Fixes: 2daf565f91b5 ("examples: install as part of ninja install")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The drivers for OCTEON TX2 are not supported in 32-bit mode.
Suggested-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
To test the installation process of DPDK using "ninja install"
test-meson-builds.sh builds a subset of the examples using "make". To allow
more flexibility for people testing, allow the set of examples chosen for
this make test to be overridden using variable "DPDK_BUILD_TEST_EXAMPLES"
in the environment.
Since a number of example apps link against drivers directly even for
shared builds, we need to ensure that LD_LIBRARY_PATH points to the main
DPDK lib folder so any dependencies of those drivers can be found e.g. that
the PCI/vdev bus driver .so is found. [All drivers are symlinked from
drivers dir back to lib dir on install, so only one dir rather than two is
needed in the path.]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The x86-default environment was loaded after installing this target.
I did not see any problem with it, yet we should load corresponding
environment before installing a target.
Fixes: bd253daa7717 ("devtools: fix test of ninja install")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
The default verbosity of test-meson-builds.sh is to be quiet.
In order to better apply the verbosity policy, some file descriptors
are open to redirect to stdout or /dev/null accordingly.
The target variable and meson/ninja commands are printed in verbose modes.
The installation commands are printed only in very verbose mode.
The examples build commands are printed only in very verbose mode.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The variables DPDK_MESON_OPTIONS, PATH, PKG_CONFIG_PATH,
CPPFLAGS, CFLAGS and LDFLAGS can be customized in the config file
loaded by devtools/load-devel-config at each build.
The configuration can be adjusted per target thanks to the value set
in the DPDK_TARGET variable.
PKG_CONFIG_PATH is specific to each target, so it must be empty
before configuring each build from the file according to DPDK_TARGET.
Inheriting a default PKG_CONFIG_PATH for all targets does not make sense
and is prone to confusion.
DPDK_MESON_OPTIONS might take a global initial value from environment
to customize a build test from the shell. Example:
DPDK_MESON_OPTIONS="b_lto=true"
Some target-specific options can be added in the configuration file:
DPDK_MESON_OPTIONS="$DPDK_MESON_OPTIONS kernel_dir=$MYKERNEL"
Fixes: 272236741258 ("devtools: load target-specific compilation environment")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
This script inspects an ELF file (binary or shared library) and its
linked dependencies by following DT_NEEDED tags.
So far a simple librte_pmd prefix was used as a filter to only parse
DPDK drivers dependencies.
While the reason is not clear from the commitlog of the patch that
introduced this filter, it was probably added for performance reasons,
since going through all dependencies can be quite long.
Testing with a DPDK built before the driver name changes:
- running the script takes ~0.3s with the filter,
- running the script takes ~9s without the filter,
Now that we changed the driver library names, it becomes more difficult
to identify only DPDK drivers, but we can just filter on the librte_
prefix to identify DPDK libraries: the script later checks for the
PMD_INFO_STRING string in .rodata and it is enough to differentiate the
DPDK drivers from the other DPDK libraries.
Running the script with this patch takes ~0.5s.
A debug message was logged for each inspected file, it gives no useful
information and is removed.
Fixes: a20b2c01a7a1 ("build: standardize component names and defines")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Robin Jarry <robin.jarry@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
For users with 32-bit applications who wish to use DPDK we need to provide
instructions on creating a 32-bit build of DPDK with meson. Therefore add a
section with this information to the GSG.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
It's reasonably common for patches to have issues when built on 32-bits, so
to prevent this, we can add a 32-bit build (if supported) to the
"test-meson-builds.sh" script. The tricky bit is using a valid
PKG_CONFIG_LIBDIR, so for now we use two common possibilities for where that
should point to in order to get a successful build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The fix of max_rx_pkt_len for allowing VLAN packets in all cases
was breaking configuration of some drivers. Example with virtio:
Ethdev port_id=0 max_rx_pkt_len 11229 > max valid value 9728
Fail to configure port 0
Trying to fix the logic was revealing other issues in some drivers.
That's why it is decided to revert.
The workaround for the original issue would be
to set the MTU explicitly from the application
with rte_eth_dev_set_mtu().
See RFC: https://patches.dpdk.org/patch/83756/
Fixes: f6870a7ed6b3 ("app/testpmd: fix max Rx packet length for VLAN packet")
Cc: stable@dpdk.org
Reported-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The mbuf header files had some commenting style errors that affected the
API documentation.
Also, the RTE_ prefix was missing on a macro and a definition.
Note: This patch does not touch the offload and attachment flags that are
also missing the RTE_ prefix.
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
cmdline_numtype member names clash with Windows system identifiers.
Add RTE_ prefix to cmdline constants to avoid this and possible
future conflicts.
Suggested-by: Ranjit Menon <ranjit.menon@intel.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Jie Zhou <jizh@microsoft.com>
Tested-by: Jie Zhou <jizh@microsoft.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Avoid code duplication by combining single and multi threaded tests
Also, enable support for more than 2 writers
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Return error if Add/Delete fail in multiwriter perf test
Return error if single or multi writer test fails
Fixes: eff30b59cc2e ("test/lpm: add RCU performance tests")
Cc: stable@dpdk.org
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Fix incorrect calculations for LPM adds, LPM deletes,
and average cycles in RCU QSBR perf tests
Since, rcu qsbr tests run for 'RCU_ITERATIONS' and not
'ITERATIONS', replace 'ITERATIONS' with 'RCU_ITERATIONS'
for calculating adds, deletes, and cycles.
Also, for multi-writer perf test, each writer only writes
half of NUM_LDEPTH_ROUTE_ENTRIES.
For 2 writers, total adds (or deletes) should be
(RCU_ITERATIONS * NUM_LDEPTH_ROUTE_ENTRIES) instead of
(2 * RCU_ITERATIONS * NUM_LDEPTH_ROUTE_ENTRIES).
Since, for both the single and multi writer tests, total adds/deletes
is equal to (RCU_ITERATIONS * NUM_LDEPTH_ROUTE_ENTRIES),
this has been replaced with a macro 'TOTAL_WRITES' and furthermore,
'g_writes' has been removed since it is always a fixed value
equal to TOTAL_WRITES.
Fixes: eff30b59cc2e ("test/lpm: add RCU performance tests")
Cc: stable@dpdk.org
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
A "+" symbol was incorrectly placed at the beginning of a line,
this is now removed.
Fixes: 52af6ccb2b39 ("telemetry: add utility functions for creating JSON")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Currently, flow-perf measures the performance of
rule installation/deletion operations by breaking
down the entire number of operations into windows
of fixed size (i.e., 100000 operations per window).
Then, flow-perf measures the total time per window
and computes an average time across all windows.
This commit allows flow-perf users to configure
the number of rules per window instead of using
a fixed pre-compiled value. To do so, users must
pass --rules-batch=N, where N is the number of
rules per window (or batch).
For consistency reasons, flow_count variable is
now renamed to rules_count. This variable is the
total number of rules to be installed/deleted.
For example, if a user wants to measure how much
time it takes to install 1M rules in a certain NIC,
he/she can input:
--rules-count=1000000
This way flow-perf will break down 1M flow rules into
10 batches of 100k flow rules each (this is the default
batch size) and compute an average across the 10
measurements.
Now, if the user modifies the number of rules per
batch as follows:
--rules-count=1000000 --rules-batch=500000
then flow-perf will break down 1M flow rules into
2 batches of 500k flow rules each and compute the
average across the 2 measurements.
Finally, this commit also adds default variables
to the usage function instead of hardcoded values.
Signed-off-by: Georgios Katsikas <katsikas.gp@gmail.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Remove notice announcing an already-implemented change.
In 19.05, rte_power_set_env was changed to return -1 in cases where
the environment was already set up, and for the same release, a
deprecation notice was added.
This patch removes that notice.
The API change was tested by calling rte_power_set_env twice. The first
call succeeded, and the second call failed, as expected.
Fixes: 5a5f3178d4a8 ("power: return error when environment already set")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
The typo "withe" should have been "with the". This is now fixed.
Fixes: 89397a01ce4a ("kni: set default carrier state of interface")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The dynamic flag management is broken if rte_mbuf_dynflag_lookup()
is done in a secondary process because the local pointer to
the memzone is not ever initialized.
Fix it by using the same checks as dynfield_register().
I.e if shared memory zone has not been looked up already,
then discover it.
Fixes: 4958ca3a443a ("mbuf: support dynamic fields and flags")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch removes the dual keyword from dual license
definitions to avoid confusion. As the *dual* word is
not required to be added SPDX license.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The current DevX implementation of the relaxed ordering feature is
enabling relaxed ordering usage only if both relaxed ordering read AND
write are supported. In that case both relaxed ordering read and write
are activated.
This commit will optimize the usage of relaxed ordering by enabling it
when the read OR write features are supported. Each relaxed ordering
type will be activated according to its own capability bit.
This will align the DevX flow with the verbs implementation of
ibv_reg_mr when using the flag IBV_ACCESS_RELAXED_ORDERING
Fixes: 53ac93f71ad1 ("net/mlx5: create relaxed ordering memory regions")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
When PF command channel is error, the variables in the log has been
cleared, which is not printed yet.
Fixes: 214164a6bf7f ("net/hinic/base: remove unused function parameters")
Cc: stable@dpdk.org
Signed-off-by: Guoyang Zhou <zhouguoyang@huawei.com>
For device initialize, driver only supports four aeqs before,
and now driver can supports two or more aeqs from chip
config file.
Fixes: 611faa5f46cc ("fix various typos found by Lintian")
Cc: stable@dpdk.org
Signed-off-by: Guoyang Zhou <zhouguoyang@huawei.com>
The ethdev port id is 16 bits now. This patch fixes the data type
of the variable for 'pid', which changing from uint32_t to uint16_t.
RTE_MAX_ETHPORTS is the maximum number of ports, which customized by
the user. To avoid 16-bit unsigned integer overflow, the valid value
of RTE_MAX_ETHPORTS should be set from 0 to UINT16_MAX, and it is
safer to cut one more port from space.
So we use RTE_BUILD_BUG_ON() to ensure that RTE_MAX_ETHPORTS is less
to UINT16_MAX.
Fixes: 5b7ba31148a8 ("ethdev: add port ownership")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update release notes with feature of outer IP hash for GTPC and GTPU.
Fixes: 6cd2d6adc783 ("net/iavf: support outer IP hash for GTPC")
Fixes: 262100a34a38 ("net/iavf: support outer IP hash for no inner GTPU")
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add PROT field into IPv4 and IPv6 protocol headers for rss hash.
Fixes: 91f27b2e39ab ("net/iavf: refactor RSS")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Coverity flags that 'rx_conf' variable is used before
it's checked for NULL. This patch fixes this issue.
Coverity issue: 363570
Fixes: 4ff702b5dfa9 ("ethdev: introduce Rx buffer split")
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The rte_flow_item_eth and rte_flow_item_vlan items are refined.
The structs do not exactly represent the packet bits captured on the
wire anymore so set raw_encap/decap commands should only copy real
header instead of the whole struct.
Replace the rte_flow_item_* with the existing corresponding rte_*_hdr.
Fixes: 09315fc83861 ("ethdev: add VLAN attributes to ethernet and VLAN items")
Signed-off-by: Xiaoyu Min <jackmin@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Flow destructor tired to access flow related resources after the
flow object memory was already released and crashed dpdk process.
The patch moves flow memory release to the end of destructor.
Fixes: 4ec6360de37d ("net/mlx5: implement tunnel offload")
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The recent Rx code refactoring moved the incrementing
of the CQ completion index out of the rxq_cq_decompress_v()
function to the rxq_burst_v() function.
The advancing of CQ completion index was removed in SSE
version only causing Neon and Altivec Rx bursts to stall.
Remove the incrementation of CQ completion index for all
the architectures in order to fix the stall.
Fixes: 1ded26239aa0 ("net/mlx5: refactor vectorized Rx")
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
This patch fixes a couple of scenarios which were overlooked
by the patch which added VXLAN rte_flow offload support.
1. When a PMD application queries for flow counters, it could ask PMD
to reset the counters when the application is doing the counters
accumulation. In this case, PMD should not accumulate rather reset
the counter.
2. Some of the PMD applications may set the protocol field in the IPv4
spec but don't set the mask. So, consider the mask in the proto
value calculation.
4. The cached tunnel inner flow is not getting installed in the
context of tunnel outer flow create because of the wrong
error code check when tunnel outer flow is installed in the
hardware.
5. When a dpdk application offloads the same tunnel inner flow on
all the uplink ports, other than the first one the driver rejects
the rest of them. However, the first tunnel inner flow request
might not be of the correct physical port. This is fixed by
caching the tunnel inner flow entry for all the ports on which
the flow offload request has arrived on. The tunnel inner flows
which were cached on the irrelevant ports will eventually get
aged out as there won't be any traffic on these ports.
Fixes: 675e31d877b6 ("net/bnxt: support VXLAN decap offload")
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
In some instances link was not coming up if PAM4 signaling is enabled.
Added check to disable autoneg if FW indicates auto speeds are zero.
Use default auto speeds if PAM4 auto speeds is not set.
Added a fix for forced link setting.
Fixes: c23f9ded0391 ("net/bnxt: support 200G PAM4 link")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This attribute helps PMDs to tell actions supposed to work
on the so-called hardware e-switch level from regular ones.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
In a flow rule, attribute "transfer" means operation level
at which both traffic is matched and actions are conducted.
Add the very same attribute to shared action configuration.
If a driver needs to prepare HW resources in two different
ways, depending on the operation level, in order to set up
an action, then this new attribute will indicate the level.
Also, when handling a flow rule insertion, the driver will
be able to turn down a shared action if its level is unfit.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrey Vesnovaty <andreyv@nvidia.com>
When the max Rx packet length is smaller than the sum of MTU size and
ether overhead size, it should be enlarged, otherwise the VLAN packets
will be dropped.
Fixes: 35b2d13fd6fd ("net: add rte prefix to ether defines")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some header files have included by others. Also,
some header files have a header file self-contained
error will trigger building warning. As a result,
it is unnecessary and move it into the correct
location.
Beside, here also remove some unused lines.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
If hardware does not support QL (quantity limiter), the int_ql_max
is 0, software should confirm ql_value is less than int_ql_max
before write QL register. This patch add check of int_ql_max
value from firmware and delete the unused variable coalesce_mode.
Fixes: 27911a6e62e5 ("net/hns3: add Rx interrupts compatibility")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Scheduling rate of port-level in hns3 PF driver configured to
hardware is obtained from firmware, which determines the
bandwidth capability of the port. The rate in firmware is
generally configured with the maximum value for network engine
supporting multiple rates, such as 10G and 25G. It may cause
the following issues:
1) When a 10G optical module is used on the network engine, scheduling
rate of this port will also be configured to hardware with 25G.
However, the MAC rate of this port is 10G. In this case, it is
unreasonable that the port scheduling rate is different from the MAC
rate.
2) If default speed in firmware is not the maximum value, the 25G port
may not reach the capability of the port.
Therefore, we fix configurations of port-level scheduling rate
according to updating of MAC link speed.
Fixes: 59fad0f32135 ("net/hns3: support link update operation")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Kupeng920 support tso and checksum offload for VXLAN_GPE with
the next protocol id 3(i.e., Ethernet).
Kupeng930 support TSO and checksum offload for VXLAN_GPE with
the next protocol id 1,2,3(i.e., IPv4, IPv6 and Ethernet).
This patch add support for this tunnel type.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Currently, the header length of all the layers are fixed, It would
lead to a csum error when the header length changed.
This patch fixes above problem by using the header length in mbuf
instead of the fixed header length to perform the TX cksum offload.
Fixes: bba636698316 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
