To support QoS scheduler APIs, create a new C file for
the TM (Traffic Management) ops but without any function
implemented.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add the support of the Traffic Management API,
rte_tm_hierarchy_commit.
When calling this API, the driver tries to enable
the TM configuration on HW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To support QoS scheduler APIs, create a new C file for
the TM (Traffic Management) ops but without any function
implemented.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Used rte_log2_u32() to replace integer log2() to
remove libm dependency.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
NXP Copyright has been wrongly worded with '(c)' at various places.
This patch removes these extra characters. It also removes
"All rights reserved".
Only NXP copyright syntax is changed. Freescale copyright is not
modified.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Virtual device/driver probing done via name.
A new alternative method introduced to probe the device with providing
driver name in devargs as "driver=<driver_name>".
This patch removes alternative method and fixes virtual device usages
with proper device names.
Fixes: 87c3bf29c642 ("test: do not short-circuit null device creation")
Fixes: d39670086a63 ("eal: parse driver argument before probing drivers")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The current virtio supports Transmit Segmentation Offload, but
does not really support Large Receive Offload. The driver was confusing
the two offloads.
Fixes: 86d59b21468a ("net/virtio: support LRO")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The virtio driver is confused about the meaning of the ip_checksum
flag. In DPDK, ip_checksum means the hardware is capable of checking
the Layer 3 IP checksum. But KVM/QEMU does not do that. The flag
VIRTIO_NET_F_GUEST_CSUM controls whether the receive side does
Layer 4 (TCP/UDP) checksum offload.
Fix by erroring out any requests to do IP checksum.
Fixes: 96cb6711939e ("net/virtio: support Rx checksum offload")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Replace the incorrect reference to "Cavium Networks", "Cavium Ltd"
company name with correct the "Cavium, Inc" company name in
copyright headers.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Since "rte_eal_dev_init()" has been removed, the comment referred to
it should be modified simultaneously.
Fixes: 9721b4d543a3 ("eal: remove unused device init function")
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The rte_eth_dev.data pointer is set to a reference to a static table.
Attempting to rte_free() it leads to a panic. For example, the
following commands result in a panic if run in testpmd
testpmd> port attach virtio_user0,path=/dev/vhost-net,iface=test0
testpmd> port stop 2
testpmd> port close 2
testpmd> port detach 2
Fixes: ce2eabdd43ec ("net/virtio-user: add virtual device")
Cc: stable@dpdk.org
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
To make vectorized burst routines enabled, it is required to run on x86_64
architecture. If all the conditions are met, the vectorized burst functions
are enabled automatically. The decision is made individually on RX and TX.
There's no PMD option to make a selection.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The callbacks are global to a device but the selection is made every queue
configuration, which is redundant.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When searching LKEY, if search key is mempool pointer, the 2nd cacheline
has to be accessed and it even requires to check whether a buffer is
indirect per every search. Instead, using address for search key can reduce
cycles taken. And caching the last hit entry is beneficial as well.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When processing Tx completion, it is more efficient to free buffers in bulk
using rte_mempool_put_bulk() if buffers are from a same mempool.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
For Tx SW ring (txq->elts[]), indexes are kept and used in
txq->elts_head/tail. Because of this, one entry must always be left unused
and it also makes code complex. Changed to store counters instead of
indexes in order to make the code simpler and to reduce a few calculations.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Currently, if requested MTU is bigger than mbuf size and scattered
receive is not enabled, setting MTU to that value fails.
This patch allows setting this special MTU when device is stopped,
because scattered_rx will be re-configured during next port start
and driver may enable scattered receive according new MTU value.
After this patch, driver may select different receive function
automatically after MTU set, according MTU values selected.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch removes restrictions in bonded device library which prevent a
bonded device to be added to another bonded device with the limitation
that 802.3ad mode is not supported if one or more slaves is also a
bonded device,
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
This patch fixes the management of link properties in the bonded device.
In all mode except mode 4 a bonded device link will default to reporting
the link as full duplex and auto-neg. The link speed for a bond port is
calculated on it's active slaves and the particular mode it is running
in. The bonding link speed is reported based on the transmit link as in
some modes link speed between egress/ingress is not symmetrical.
- round-robin, balance, 802.3ad, TLB and ALB modes all report the link
speed as the sum of the speed of each active slave.
- active backup link speed is reported as the speed of the current
primary slave
- broadcast is reported as the minimum of value of the active slaves
link speeds.
In mode 4 (link aggregation 802.3ad) the properties of the first slave
added to the bonded device are slave and subsequent slaves are verified
to have the same properties.
Finally in the bond_ethdev_lsc_event_callback function the link
properties of the device are updated after any change to the number of
active slaves.
Fixes: 2efb58cbab6e ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Enable IPv6 support with rte_flow API.
Only supports signature Match.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Enable signature match for rte_flow API.
RTE_FLOW_ITEM_TYPE_FUZZY specify a signature match.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Code cleanup done for 2 purposes.
1. "index" variable is no more needed.
2. inline function makes it easier and safer to nest into a loop.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This commit adds support for the flow API RSS action with the following
limitations:
- Only supported when isolated mode is enabled.
- The number of queues specified by the action (rte_flow_action_rss.num)
must be a power of two.
- Each queue index can be specified at most once in the configuration
(rte_flow_action_rss.queue[]).
- Because a queue can be associated with a single RSS context, it cannot
be targeted by multiple RSS actions simultaneously.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
A special "parent" queue must be allocated in addition to a group of
standard Rx queues for RSS to work. This is done automatically outside of
isolated mode by the PMD when applications request several Rx queues.
Since each configured flow rule with the RSS action may target a different
set of queues, the PMD must have the ability to dynamically allocate
several parent queues, one per RSS group.
If isolated mode was requested the default RSS parent queue isn't created
in this case.
Refactor RSS parent queue allocations (currently limited to a single
parent) in preparation for flow API RSS action support.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The user must request isolated mode before device configuration.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Refactor vmxnet3_post_rx_bufs() to call vmxnet3_renew_desc()
to update the newly allocated mbufs. While here, relocate the
relevant comments to vmxnet3_renew_desc().
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In debug mode, all mbuf ol_flags are temporarily enabled while sitting
in the Rx queue to detect otherwise silent data corruption, however
some of them are special (indirect and control) and must be cleared
before returning mbufs to the pool to avoid crashing.
Fixes: 7fae69eeff13 ("mlx4: new poll mode driver")
CC: stable@dpdk.org
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
