Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Arrays agg_count and agg_bandwidth should be indexed by slave_id not by
aggregator port_id.
The new_agg_id should be chosen as slave_id from slaves table in
different selection modes.
Fixes: 6d72657ce3 ("net/bonding: add other aggregator modes")
Cc: stable@dpdk.org
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Acked-by: Chas Williams <chas3@att.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Port validation should be prior to getting device data
to avoid segment fault. This patch fixed the segment fault
caused by invalid port using.
Fixes: 6d72657ce3 ("net/bonding: add other aggregator modes")
Fixes: 112891cd27 ("net/bonding: add dedicated HW queues for LACP control")
Cc: stable@dpdk.org
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Acked-by: Chas Williams <chas3@att.com>
Some of the internal header files have 'rte_' prefix
and some don't.
Remove 'rte_' prefix from all internal header files.
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
The ether header does not need to be packed since that makes no sense for
structures with only bytes in them, but it should be aligned to a two-byte
boundary to simplify access to it from code. Other packed structures that
use this also need to be updated to take account of the change, either by
removing packing - where it is clearly unneeded - or by explicitly giving
those structures 2-byte alignment also.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
rte_eal_compare_pci_addr has been deprecated since v17.11.
Convert to rte_pci_addr_cmp.
Fixes: c848b518bb ("net/bonding: support bifurcated driver in eal")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
DPDK currently compiles with implicit-fallthrough=2 warning level. With gcc
-Wextra flag, the default level is 3, so some minor changes are needed to
support this in DPDK.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
slave aggregator_port_id is in [0, RTE_MAX_ETHPORTS-1] range.
If RTE_MAX_ETHPORTS is > 8, we can hit out of bound accesses on
agg_bandwidth[] and agg_count[] arrays.
Fixes: 6d72657ce3 ("net/bonding: add other aggregator modes")
Cc: stable@dpdk.org
Signed-off-by: Hui Zhao <zhaohui8@huawei.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Chas Williams <chas3@att.com>
mode_bond_id and mode_band_id are slave ids, stored on 16bits.
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Hui Zhao <zhaohui8@huawei.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Enabling/disabling of allmulticast mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable() return
value was changed from void to int, so this patch modify usage
of these functions across net/bonding
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The return value of rte_eth_link_get() and rte_eth_link_get_nowait()
was changed from void to int. Update the usage of the functions
according to the new return type.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change rte_eth_link_get() and rte_eth_link_get_nowait() return value
from void to int and return negative errno values in case of error
conditions.
Return value of link_update callback is ignored since the callback
returns not errors but whether link up status has changed or not.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Fix the issue that the link speed of the bond device was set to the
link speed of the first active slave in broadcast mode.
Set the link speed of the bond device to the minimum value across
all of the slaves in that case.
Fixes: deba8a2f8b ("net/bonding: fix link properties management")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Chas Williams <chas3@att.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across net/bonding according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
net/bonding according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Rather than the global promiscuous mode on all slaves, let's try to use
allmulti.
To do this, we apply the same mechanism than for promiscuous and drop in
rx_burst.
When adding a slave, we first try to use allmulti, else we try
promiscuous.
Because of this, we must be able to handle allmulti on the bonding
interface, so the associated dev_ops is added with checks on which mode
has been applied on each slave.
Rather than add a new flag in the bond private structure, we can remove
promiscuous_en since ethdev already maintains this information.
When starting the bond device, there is no promisc/allmulti re-apply
as, again, ethdev does this itself.
On reception, we must inspect if the packets are multicast or unicast
and take a decision to drop based on which mode has been enabled on the
bonding interface.
Note: in the future, if we define an API so that we can add/remove mc
addresses to a port (rather than the current global set_mc_addr_list
API), we can refine this to only register the LACP multicast mac
address.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Chas Williams <chas3@att.com>
By default, the 802.3ad code enables promisc mode on all slaves.
To avoid all packets going to the application (unless the application
asked for promiscuous mode), all frames are supposed to be filtered in
the rx burst handler.
However the incriminated commit broke this because non pure ethernet
frames (basically any unicast Ether()/IP() packet) are not filtered
anymore.
Fixes: 71b7b37ec9 ("net/bonding: use ptype flags for LACP Rx filtering")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Chas Williams <chas3@att.com>
Fast queue Rx burst function is missing checks on promisc and the
slave collecting state.
Define an inline wrapper to have a common base.
Fixes: 112891cd27 ("net/bonding: add dedicated HW queues for LACP control")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Chas Williams <chas3@att.com>
We'd better consolidate the fast queue and the normal tx burst functions
under a common inline wrapper for maintenance.
But looking closer at the bufs_slave_port_idxs[] mapping array in those
tx burst functions, its size is invalid since up to nb_bufs are handled
here.
A previous patch [1] fixed this issue for balance tx burst function
without mentioning it.
802.3ad and balance modes are functionally equivalent on transmit.
The only difference is on the slave id distribution.
Add an additional inline wrapper to consolidate even more and fix this
issue.
[1]: https://git.dpdk.org/dpdk/commit/?id=c5224f623431
Fixes: 09150784a7 ("net/bonding: burst mode hash calculation")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Chas Williams <chas3@att.com>
The generic RTE_LOGTYPE_PMD is a historical relic and should
not be used. Bonding driver was still using it in one place.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The cmdline library used to be the only way to parse a
mac address. Now there is rte_ether_unformat_addr.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The device private pointer (dev_private) is of type void *
therefore no cast is necessary in C.
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.
old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Also rename arp_hrd, arp_pro, arp_hln, arp_pln and arp_op fields
to avoid conflict with the #defines in gnu libc.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add validation to pointer constructed from the IPv4 header length
in order to prevent malformed packets from generating a potential
out of bounds memory read.
Fixes: 09150784a7 ("net/bonding: burst mode hash calculation")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Chas Williams <chas3@att.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Using the size of the source string is incorrect when printing using
snprintf. Instead pass in the buffer size to be used appropriately.
Fixes: 457ecf2953 ("bond: add debug info for mode 6")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Caught by code review, rxq and txq indexes are on 16bits.
Fixes: d1d1e664c6 ("bonding: free queue memory when closing")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Caught by code review, those variables are supposed to be on 16bits to
avoid endless loops in the (unlikely?) case where the application asks
for receiving more than 256 packets and the accumulated num_rx_total
count reaches 256:
uint16_t num_rx_total = 0;
uint8_t j, k;
j = num_rx_total;
num_rx_total += rte_eth_rx_burst();
for (k = j; k < 2 && k < num_rx_total; k++)
rte_prefetch0(rte_pktmbuf_mtod(bufs[k], void *));
while (j < num_rx_total) {
j++;
}
Fixes: 46fb436836 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Caught by code review, with port id conversion to 16bits, the slave id
have been extended to 16bits as well (both slave index and count).
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Following the port id conversion to 16bits, two references to bonding
port id have been missed.
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When monitor(port-mirroring) traffic from other LACP port-channel,
rx_machine_update may be receiving other LACP negotiation packets.
Thus bond mode 4 negotiation will fail.
Fixes: 112891cd27 ("net/bonding: add dedicated HW queues for LACP control")
Cc: stable@dpdk.org
Signed-off-by: Liang Zhang <zhangliang@bigo.sg>
Acked-by: Chas Williams <chas3@att.com>
test_alb_reply_from_client test fails due to incorrect active slave
array's index. This was due to invalid active slave count.
Count of internals->active_slave is not updated even when active slave
is deactivated.
Hence active slave count always keeps incrementing beyond the actual
active slaves.
Fix is to set the internals->active_slave to starting index 0 whenever
it exceeds the number of slaves in active slave list and also update
the active slave count during slave de-activation.
Fixes: e1110e9776 ("net/bonding: fix Rx slave fairness")
Cc: stable@dpdk.org
Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Chas Williams <chas3@att.com>
For active-backup, tlb, and alb mode,
bond_ethdev_promiscuous_{enable,disable} tries to set promisc mode on
the primary port, even when there are no slaves. It is harmless, as
rte_eth_promiscuous_{enable,disable} does nothing if the port number
is invalid. But, it does print a warning message. Here is an example
from testpmd.
testpmd> create bonded device 5 0
Created new bonded device net_bonding_testpmd_0 on (port 4).
Invalid port_id=33
testpmd> set promisc 4 off
Invalid port_id=33
33 in this case is RTE_MAX_ETHPORTS + 1, the invalid primary port
number used within the bonding driver. This warning message is
harmless but can be confusing to the user. So do not try to set
promisc on a primary port when we know it does not exist (i.e. no
slaves).
Fixes: 2efb58cbab ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Chas Williams <chas3@att.com>
Copying the link properties of the first slave added may copy an
invalid link status. The speed and duplex of the slave may not
be known at this time. Delay setting the properties until the
first slave reports as link up. Note that we are still ignoring
an error from link_properties_valid. For some bonding modes,
802.3ad, we should not activate the slave if it does not have
matching link properties.
Fixes: a45b288ef2 ("bond: support link status polling")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
The Tx burst routine always needs to check for pending LACPDUs
and send them if available. Do this first to prioritize the
control traffic. We can still early exit, before calculating
the distribution slaves, if there isn't any data packets.
Fixes: 09150784a7 ("net/bonding: burst mode hash calculation")
Cc: stable@dpdk.org
Reported-by: Hui Zhao <zhaohui8@huawei.com>
Signed-off-by: Chas Williams <chas3@att.com>
We can transmit if there is at least one distributing slave.
Fixes: 09150784a7 ("net/bonding: burst mode hash calculation")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
