When using RTE_PKTMBUF_HEADROOM as 0, dpaa driver throws compilation error
error "Annotation requirement is more than RTE_PKTMBUF_HEADROOM"
This patch change it into run-time check.
Bugzilla ID: 335
Fixes: beb2a7865dda ("bus/fslmc: define hardware annotation area size")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch resets frc and ctrl in sg tx fd to avoid corruption.
Fixes: 774e9ea91992 ("net/dpaa2: add support for multi seg buffers")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
LS1088 platform CENA operation are causing issues
at high load. CINH (cache inhibited) mode is working
fine with minor performance impact.
This patch enables CINH mode selectively on LS1088 platform
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
The lcore_config structure will be hidden in future release.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David Marchand <david.marchand@redhat.com>
- fle pool allocations should be done for each process.
- cryptodev->data is shared across muliple processes but
cryptodev itself is allocated for each process. So any
information which needs to be shared between processes,
should be kept in cryptodev->data.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Previously FSLMC bus only supported blacklisting of DPNI (eth),
DPSECI (crypto) devices. With this patch, devices like DPIO,
DPMCP, and other DP* can also be blacklisted/whitelisted.
This is a required condition for secondary processes where the
secondary needs to be passed a mutually exclusive list of
resources as compared the primary and all other secondaries.
This patch also moves the DPIO memory from malloc to hugepage so
that in future in case the DPIO list can be shared, it can be
accessed in secondaries.
Once this patch is done, multi-process cases can be executed by
whitelisting/blacklisting devices in each instance.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The I/O threads for DPAA2 take their reference for bpool ID, the
port ID and other info like qdid, from the rte_eth_dev. Further,
to get this data during I/O operation, a reference of the RTE
device is kept in the queue structure (dpaa2_queue).
In case of secondary processes, rte_eth_dev is not same as the
primary process. Thus, the reference goes invalid.
This patch changes the implementation to use the dev_private
rather than the rte_eth_dev as that is shared area across
all the processes.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Initial design was to have the buffer pool per process where a
global static array stores the bpids. But, in case of secondary
processes, this would not allow the I/O threads to translate the
bpid in Rx'd packets.
This patch moves the array to a global area (rte_malloc) and in
case of Rx thread not containing a valid reference to the array,
reference is build using the handle avaialble in the dpaa2_queue.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Add flag in portal init to adjust the qbman memory type,
to decide between legacy portal mode or newly introduced
memory backed portals.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Youri Querry <youri.querry_1@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Existing code is using the lcore id as the physical core
id. Add code to get the right physical id.
Also, dpaa2 can not support one lcore mapping to multiple cpus,
print err on such cases.
Fixes: ce9efbf5bb09 ("bus/fslmc: support dynamic logging")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
various field of FD structure was getting reset in scattered
fashion. This patch align them in single macro.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This new mode is available in LX2160 platform. The code
dynamically detect the underlying qbman version and choose
the mode at runtime.
Signed-off-by: Youri Querry <youri.querry_1@nxp.com>
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
With this patch, fslmc bus and ethernet devices on this bus
would start using the physical-virtual library interfaces.
This patch impacts mempool/dpaa2, event/dpaa2, net/dpaa2,
raw/dpaa2_cmdif and raw/dpaa2_qdma as they are dependent
on the bus/fslmc and thus impact linkage of libraries.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
fle is already in virtual addressing mode - no need to perform
address conversion for it.
Fixes: 8d1f3a5d751b ("crypto/dpaa2_sec: support crypto operation")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The DPCI devices have both Tx and Rx queues. Event devices use
DPCI Rx queues only, but CMDIF (AIOP) uses both Tx and Rx queues.
This patch enables Tx queues configuration too.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
With Hotplugging memory support, the order of memseg has been changed
from physically contiguous to virtual contiguous. FSLMC bus and dpaa2
drivers depend on PA to VA address conversion when in Physical
addressing mode.
This patch creates a list of blocks requested to be pinned to the
DPAA2 mempool. For searching physical addresses, it is expected that
it would belong to this list (from hardware pool) and hence it is
less expensive than memseg walks. Though, this has marginal impact on
performance vis-a-vis legacy mode with physically contiguous memsegs.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
op storage in fle is just for reference for post dq.
So, don't convert it to iova mode.
Fixes: 37f96eb01bce ("crypto/dpaa2_sec: support scatter gather")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
In case of Receive from Ethernet we add a new pull request (prefetch)
but do not fetch the results from that pull request until next
dequeue operation. This keeps the portal in busy mode.
This patch updates the portals bifurcation to have separate portals
to receive packets for Ethernet and all other devices to use a
common portal.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Before, we were aggregating multiple pages into one memseg, so the
number of memsegs was small. Now, each page gets its own memseg,
so the list of memsegs is huge. To accommodate the new memseg list
size and to keep the under-the-hood workings sane, the memseg list
is now not just a single list, but multiple lists. To be precise,
each hugepage size available on the system gets one or more memseg
lists, per socket.
In order to support dynamic memory allocation, we reserve all
memory in advance (unless we're in 32-bit legacy mode, in which
case we do not preallocate memory). As in, we do an anonymous
mmap() of the entire maximum size of memory per hugepage size, per
socket (which is limited to either RTE_MAX_MEMSEG_PER_TYPE pages or
RTE_MAX_MEM_MB_PER_TYPE megabytes worth of memory, whichever is the
smaller one), split over multiple lists (which are limited to
either RTE_MAX_MEMSEG_PER_LIST memsegs or RTE_MAX_MEM_MB_PER_LIST
megabytes per list, whichever is the smaller one). There is also
a global limit of CONFIG_RTE_MAX_MEM_MB megabytes, which is mainly
used for 32-bit targets to limit amounts of preallocated memory,
but can be used to place an upper limit on total amount of VA
memory that can be allocated by DPDK application.
So, for each hugepage size, we get (by default) up to 128G worth
of memory, per socket, split into chunks of up to 32G in size.
The address space is claimed at the start, in eal_common_memory.c.
The actual page allocation code is in eal_memalloc.c (Linux-only),
and largely consists of copied EAL memory init code.
Pages in the list are also indexed by address. That is, in order
to figure out where the page belongs, one can simply look at base
address for a memseg list. Similarly, figuring out IOVA address
of a memzone is a matter of finding the right memseg list, getting
offset and dividing by page size to get the appropriate memseg.
This commit also removes rte_eal_dump_physmem_layout() call,
according to deprecation notice [1], and removes that deprecation
notice as well.
On 32-bit targets due to limited VA space, DPDK will no longer
spread memory to different sockets like before. Instead, it will
(by default) allocate all of the memory on socket where master
lcore is. To override this behavior, --socket-mem must be used.
The rest of the changes are really ripple effects from the memseg
change - heap changes, compile fixes, and rewrites to support
fbarray-backed memseg lists. Due to earlier switch to _walk()
functions, most of the changes are simple fixes, however some
of the _walk() calls were switched to memseg list walk, where
it made sense to do so.
Additionally, we are also switching locks from flock() to fcntl().
Down the line, we will be introducing single-file segments option,
and we cannot use flock() locks to lock parts of the file. Therefore,
we will use fcntl() locks for legacy mem as well, in case someone is
unfortunate enough to accidentally start legacy mem primary process
alongside an already working non-legacy mem-based primary process.
[1] http://dpdk.org/dev/patchwork/patch/34002/
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch provides cleaner approach to store the DQRR entries,
which are yet to be consumed in case of atomic queues.
Also, this patch changes the storage of the DQRR entry index
into the mbuf->seqn instead of ev->opaque
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Adding support for DPDK packet parsing logic for LX2
platform to accommodate the new FRC format introduced in LX2.
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Setting correct frame size in dpaa2_dev_mtu_set
api call. Also correcting the correct max frame size
setting in hardware while dev_configure for jumbo frames
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
This patch expose the dpaa2 soc platform family type.
This is required to make some soc variant specific
decision during configuration and runtime.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add support for dynamic iova detection for DPAA2
devices and use of virtual address in such cases.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA and DPAA2 drivers were using memseg physaddr, which
has been deprecated.
Fixes: 7ba49d39f14c ("mem: rename segment address from physical to IOVA")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
For event dequeues for ethernet queues, a dpaa2_queue structure is
required to get the configuration for that ethernet queue. Based on
this configuration the rte_event is to be filled at the ingress side.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
enable the printing of objects during debuging.
use RTE_LOG to avoid function name printing for object name.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
