Move e1000 pmd to drivers/net directory
As part of move, rename "e1000" subdirectory, which contains the code
from the "base driver", to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move bonded ethdev pmd to drivers/net
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move af_packet pmd to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a new top-level "drivers" directory to which all PMDs will be moved
for easier maintenance of both lib folder and drivers themselves. This
new directory is a dependency of all the apps in the app folder, so
the makefiles for each app are updated.
To the new top-level directory add a "net" subdirectory to classify
more specifically our existing PMDs as ethernet drivers
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
[Thomas: fix dependencies and merge several patches]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In the Makefiles for the PMDs, the paths to the files are often
specified using the full path from $(RTE_SDK) variable. These paths can
be shortened, and make more flexible in case of a future path change by
specifying the paths using $(SRCDIR) instead.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Otherwise cache_flushthresh can be bigger than n, and
a consumer can starve others by keeping every element
either in use or in the cache.
Signed-off-by: Zoltan Kiss <zoltan.kiss@linaro.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When debug is enabled for 32 bits targets, it triggers some format
errors that are not visible in 64 bits. Fix them by using the proper
format from inttypes.h or the proper cast.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Do not compile these examples if the related dpdk option is not
enabled, as it's done for other examples. It allows to build
the examples directory with a reduced dpdk configuration.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Fix a cast issue:
examples/netmap_compat/lib/compat_netmap.c:827:10: error: cast to
pointer from integer of different size [-Werror=int-to-pointer-cast]
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Fix the following compilation error:
examples/bond/main.c:717:1: error: control reaches end of
non-void function [-Werror,-Wreturn-type]
The prompt() function does not return anything, so fix its prototype
to be void.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This error is detected:
examples/ip_pipeline/cmdline.c:272:15: error: address of array
'params->file_path' will always evaluate to 'true'
if (!params->file_path) {
~~~~~~~~~^~~~~~~~~
file_path is an array in a structure so it's unneeded to check it.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
When compiling with clang, it detects that a variable used for debug
is unused (debug_mask is never set):
lib/librte_pmd_i40e/i40e/i40e_nvm.c:708:20: error: unused variable
'i40e_nvm_update_state_str' [-Werror,-Wunused-variable]
STATIC const char *i40e_nvm_update_state_str[] = {
^
As we are not supposed to modify the base driver (except for update
synchronization from Intel), it was ignored with GCC thanks to the
option -Wno-unused-variable but clang was forgotten.
Fixes: 6b5aaf47d5 ("i40e/base: replace NVM debug logs")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Below compile error can be found on ICC 13.0.0, which is a warning
treated as error. Forcedly disabling the warning can fix it.
Error log:
lib/librte_pmd_i40e/i40e/i40e_nvm.c(1022): error #188: enumerated
type mixed with another type
hw->aq.asq_last_status = old_asq_status;
^
Fixes: 3b7271f395 ("i40e/base: catch NVM write semaphore timeout and retry")
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Tetsuya Mukawa <mukawa@igel.co.jp>
This patch adds the ability to process console input in the same thread
as packet processing by using poll() function.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When including only some of library headers some definitions
are missing and build fails.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Added new port type - IPv6 reassembly port.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Added new port type - IPv6 Fragmentation port
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
p->mtu field should be used instead.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Miscellaneous modifications are added as follows for future use.
- Admin queue command opcodes
- struct i40e_aqc_arp_proxy_data
- struct i40e_aq_set_phy_config
- struct i40e_aqc_nvm_config_data_immediate_field
- struct i40e_aqc_oem_param_change
- struct i40e_aqc_opc_oem_ocsd_initialize
- struct i40e_aqc_opc_oem_ocbb_initialize
In addition, sturcture and command length check at compile time
are added for each admin queue opcodes in order to report any
potential issues as early as possible.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Several structures as follows were modified for future use.
- struct i40e_link_status
- struct i40e_nvm_info
- struct i40e_veb_tc_stats
In addition, shadow RAM macros and enum were modified for future
use as well.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Make sure the sizeof() calls are taking the size of the actual
struct that we care about. By using the pointer variable, it will
always get the right struct size, even if the variable type
changes sometime in the future.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Four new interfaces are added for future use, as follows, together
with their relevant strucure and macro definitions.
- i40e_aq_read_nvm_config()
- i40e_aq_write_nvm_config()
- i40e_aq_set_lldp_mib()
- i40e_read_pba_string()
In addition, removed i40e_read_nvm_srrd() as needed.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Virtual channel operations of I40E_VIRTCHNL_OP_EVENT and
I40E_VIRTCHNL_OP_CONFIG_RSS are added for future use.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Add parsing and reporting of iSCSI capability for a given device
or function.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Add the 10G and 40G AOC phy types to the case statement in
get_media_type so that the correct information gets reported back
to the user.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
The FW for SW3E is incorrectly reporting a breakout cable as PHY
type 0x3 when it should be 0x16 (I40E_PHY_TYPE_10GBASE_SFPP_CU).
As this is supposed to be fixed in the next FW version
(FW versions >= 4.4), if we get this value back from FW and the
version is < 4.4, reassign it to I40E_PHY_TYPE_10GBASE_SFPP_CU.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
In NPAR mode the driver instance might be controlling the base
partition or one of the other "fake" PFs. There are some things
that can only be done by the base partition, aka partition_id 1.
This code does a bit of work to find how many partitions are there
in per port and what is the current partition_id. In addition,
FCOE is disabled by default, as it was pushed out from the firmware.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Getting the pf_id from the function number was a good place to
start, but when the PF was setup in pass-thru mode, the PCI
bus/device/function was virtualized and the number in the VM is
different from the number in the bare metal. This caused HW
configuration issues when the wrong pf_id was used to set up the
HMC and other structures. The PF_FUNC_RID register has the real
bus/device/function information as configured by the BIOS, so use
that for a better number.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
As it is requried to blink the LEDs only, it should ignore the
activity LEDs. Also a fix is added to clear the GPIO blink field
specifically.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
As i40e_update_link_info() is just a simple wrapper of AQ command
interface of i40e_aq_get_link_info(), the AQ command interface
should be used directly.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
A sparse complaint in i40e_debug_aq in a funky buffer write goes
away by straightening out the code out to something less convoluted.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
The timeout of ASQ command is enlarged from 100 ms to 250 ms to
wait longer time for the response. nvm_busy is not needed anymore.
Also nvm_release_on_done and nvmupd_state will be set during
adminq init.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
When sending driver version to FW, FLAG_SI is not needed as it is
done as part of i40e_fill_default_descriptor function call, and it
should be replaced by FLAG_BUF and FLAG_RD.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
The NVM image version has useful data but it is a per image version,
and every image can have a different one. While for the dev starter
version, all the images for release will have the same version. So
it would be better to use dev starter version number.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Since the FW build number is available in the AQ response, save it
off for future use.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
The data buffer for i40e_calc_nvm_checksum() is too big, so move
it off and allocate separately. In addition, use
i40e_read_nvm_buffer() to get the whole shadow RAM, together with
minor enhancements.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Only poll on the NVM semaphore if there's time left on a previous
reservation.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
The state transitions after an error were not managed well, so
these changes get us back to the INIT state or don't transit
out of the INIT state after most errors.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
To support better debug information printing, all DEBUGOUT() are
replaced by i40e_debug(). In addition, the NVM update state strings
are added in debug information.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Decoding the AQ return code is great except when the AQ send timed
out and there's no return code set. This changes the handy decoder
interface to help catch and properly report the condition as an
useful error number rather than returning a misleading '0'.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
In some circumstances, a multi-write transaction takes longer than
the default 3 minutes timeout on the write semaphore. If the write
failed with an EBUSY status, this is likely the problem. So here
it tries to reacquire the semaphore and then retry the write.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
To support different hardware, shadow RAM read should be done via
SRCTL register or AQ command, and shadow RAM write should be done
via AQ command only.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
To simplify the usage of invoking 'i40e_hmc_get_object_va', input
parameters of it were reworked. In addition, minor code style fixes
were added as well.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
As base driver provides 'i40e_aq_debug_read_register()', the same
functional interface of 'i40e_debug_read_register()' can be replaced.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Recent firmware versions support CEE DCBX, while old firmware
versions support IEEE DCBX only. So firmware version needs to be
checked during getting DCB configurations. To support CEE DCBX,
AQ commands of 'i40e_aq_get_cee_dcb_config' and
'i40e_aq_start_stop_dcbx' were implemented.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
This patch is useful for future expansion when new VF MAC types get
added. It also helps with cleaning up VF driver flow.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Macros of PF_DRIVER, VF_DRIVER and INTEGRATED_VF were defined to
support building both PF and VF driver together. PF_DRIVER needs
to be defined if a build is for PF only, while VF_DRIVER for VF
only. PF_DRIVER, VF_DRIVER and INTEGRATED_VF are all needed for
building both PF and VF driver together.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
To be consistent with the original base driver, the variable name
of 'err' should be renamed to 'perrno'.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Some macros of register definitions or relevant are added, modified
or deleted. In detail, they are as follows.
- I40E_PRTDCB_RUPTQ
- I40E_GLGEN_GPIO_CTL
- I40E_GLGEN_MDIO_CTRL
- I40E_GLGEN_RSTENA_EMP
- I40E_GLPCI_LATCT
- I40E_GLTPH_CTRL
- I40E_GLPRT_BPRCH
- I40E_GLPRT_TDPC
- I40E_GLSCD_QUANTA
Also reading the register of I40E_GLPRT_TDPC is deleted as its
definition is deleted.
Test report: http://www.dpdk.org/ml/archives/dev/2015-May/017384.html
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
