This patch enables building the e1000 driver for Windows.
I tested using two Windows VM on top of VMware Fusion,
creating two e1000 devices with device ID 0x10D3 (8274L),
verifying rx/tx works correctly using dpdk-testpmd.exe
rxonly and txonly mode.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Tested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Add support for PPP over L2TPv2 over UDP protocol RSS Hash based
on inner IP src/dst address and TCP/UDP src/dst port.
Patterns are listed below:
eth/ipv4(6)/udp/l2tpv2/ppp/ipv4(6)
eth/ipv4(6)/udp/l2tpv2/ppp/ipv4(6)/udp
eth/ipv4(6)/udp/l2tpv2/ppp/ipv4(6)/tcp
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added flow pattern items and header formats of L2TPv2 and PPP.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Implement API to validate meter policy for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
To keep flow format uniform with ice, this patch adds support for
this RSS rule:
flow create 0 ingress pattern eth / ipv6 / ipv6_frag_ext / end \
actions rss types ipv6-frag end queues end queues end / end
Fixes: ef4c16fd9148 ("net/i40e: refactor RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add support for item PORT_REPRESENTOR which should
be used instead of ambiguous item PORT_ID.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Action PORT_ID implementation assumes ingress only. Its semantics
suggests that support for equal action PORT_REPRESENTOR be added.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Semantics of the existing support for action PORT_ID suggests
that support for equal action REPRESENTED_PORT be implemented.
Helper functions keep port_id suffix since action
MLX5_FLOW_ACTION_PORT_ID is still used internally.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for actions PORT_REPRESENTOR and REPRESENTED_PORT
based on the existing support for action PORT_ID.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Add support for actions PORT_REPRESENTOR and REPRESENTED_PORT
based on the existing support for action PORT_ID.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for items PORT_REPRESENTOR and REPRESENTED_PORT
based on the existing support for item PORT_ID.
The use of item PORT_ID depends on the specified direction attribute.
Items PORT_REPRESENTOR and REPRESENTED_PORT, in turn, define traffic
direction themselves. The former matches traffic from the driver's
vNIC. The latter matches packets from either a v-port (network) or
a VF's vNIC (if the driver's port is a VF representor).
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to send matching traffic to the
entity represented by the given ethdev, at embedded switch level.
Such an entity can be a network (via a network port), a guest
machine (via a VF) or another ethdev in the same application.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to send matching traffic to
the given ethdev (to the application), at embedded switch level.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to match traffic entering the
embedded switch from the entity represented by the given ethdev.
Such an entity can be a network (via a network port), a guest
machine (via a VF) or another ethdev in the same application.
Must not be combined with direction attributes.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to match traffic
entering the embedded switch from the given ethdev.
Must not be combined with direction attributes.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
GROUP is an in-house term for so-called "tunnel_match" flows.
On parsing, they are detected by virtue of PMD-internal item
MARK. It associates a given flow with its tunnel context.
Such a flow is represented by a MAE action rule which is
chained with the corresponding JUMP rule's outer rule
by virtue of matching on its recirculation ID.
GROUP flows do narrower match than JUMP flows do and
decapsulate matching packets (full offload).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
JUMP is an in-house term for so-called "tunnel_set" flows. On parsing,
they are identified by virtue of actions MARK (PMD-internal) and JUMP.
The action MARK associates a given flow with its tunnel context.
Such a flow is represented by a MAE outer rule (OR) which has its
recirculation ID set. This ID is also associated with the tunnel
context. The OR is supposed to set this ID in 8 high bits of
Rx mark in matching packets. It also counts the packets.
Packets that hit the OR but miss in action rule (AR) table,
should go to MAE admin PF (that is, to DPDK) by default.
Support for the use of action COUNT in JUMP
flows will be introduced by later patches.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
A more fine-grain flow API action RTE_FLOW_ACTION_TYPE_SAMPLE should
be used instead of it.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for inline inbound and outbound IPSec for SA create,
destroy and other NIX / CPT LF configurations.
This patch also changes dpdk-devbind.py to list new inline
device as misc device.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support to fetch port and queue stats via xstats API. Also remove
queue stats from basic stats because they're now available via xstats
API for the VF.
Signed-off-by: Nikhil Vasoya <nikhil.vasoya@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
This patch enables building the ixgbe driver for Windows.
It also enables its dependencies on security and cryptodev.
I tested on AWS using ixgbe VF device, using dpdk-testpmd.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
TX redirection support by flow action RTE_FLOW_ACTION_TYPE_PHY_PORT
and RTE_FLOW_ACTION_TYPE_PORT_ID
This action is executed by HW to forward packets between ports.
If the ingress packets match the rule, the packets are switched
without software involved and perf is improved as well.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add ice support for new ethdev APIs to enable/disable and read/write/adjust
IEEE1588 PTP timestamps. Currently, only scalar path supports 1588 PTP,
vector path doesn't.
The example command for running ptpclient is as below:
./build/examples/dpdk-ptpclient -c 1 -n 3 -- -T 0 -p 0x1
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Use the dynamic mbuf to register timestamp field and flag.
The ice has the feature to dump Rx timestamp value into dynamic
mbuf field by flex descriptor. This feature is turned on by dev
config "enable-rx-timestamp". Currently, it's only supported
under scalar path.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The default VF driver for Intel 700 Series Ethernet Controller already
switch to iavf in DPDK 21.05. And i40evf is no need to maintain now,
so remove i40evf related code.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Allow user to specify his own hash key and hash ctrl if the
device is supporting that. HW interprets the key in reverse byte order,
so the PMD reorders the key before passing it to the ena_com layer.
Default key is being set in random matter each time the device is being
initialized.
Moreover, make minor adjustments for reta size setting in terms
of returning error values.
RSS code was moved to ena_rss.c file to improve readability.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
In order to support asynchronous Rx in the applications, the driver has
to configure the event file descriptors and configure the HW.
This patch configures appropriate data structures for the rte_ethdev
layer, adds .rx_queue_intr_enable and .rx_queue_intr_disable API
handlers, and configures IO queues to work in the interrupt mode, if it
was requested by the application.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Artur Rojek <ar@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
For now, a rule may have only one dedicated counter, shared counters
are not supported.
HW delivers (or "streams") counter readings using special packets.
The driver creates a dedicated Rx queue to receive such packets
and requests that HW start "streaming" the readings to it.
The counter queue is polled periodically, and the first available
service core is used for that. Hence, the user has to specify at least
one service core for counters to work. Such a core is shared by all
MAE-capable devices managed by sfc driver.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Add support for rte_flow_item_raw to parse custom L2 and L3
protocols.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for ngbe PMD.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
At this point, multiple different Ethernet drivers from multiple vendors
will support the PMD power management scheme. It would be useful to add
it to the NIC feature table to indicate support for it.
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add support to fetch the SFP EEPROM settings from the firmware.
For SFP+ modules we will display 0xA0 page for status and 0xA2 page
for other information. For QSFP modules we will show the 0xA0 page.
Also identify the module types for QSFP28, QSFP, QSFP+ apart
from the SFP modules and return an error for 10GBase-T PHY.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
1. Add templates to support Thor platform.
2. Flow counter manager is not enabled if no flow counters are
configured.
3. Mark database is not enabled if mark action is not supported.
4. Removed application to port default flow.
5. Add allocate and write for the global registry file.
6. Multiple default flow templates are combined to one.
7. Remove default loopback action record, this is required in order to
support multiple platforms.
8. Enable port table support in the generic table.
9. remove global template table in order to support multiple platforms.
10. Add support to get parent VNIC from port table database.
11. VF representor action mark is made optional since not all
configurations need representor support.
12. Add layer 4 ports to computational fields.
13. Update templates to support the above changes.
14. Add support for wildcard.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Conflict resolution feature allows rejection of flows based on
the previously added flows that conflict. For instance, a five
tuple flow is added and then you add a new flow with only 4 tuple
instead having same layer2 details then it will be rejected.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Patch adds multicast filter support for cn9k and cn10k platforms.
CGX DMAC filter table(32 entries) is divided among all LMACs
connected to it i.e. if CGX has 4 LMACs then each LMAC can have
up to 8 filters. If CGX has 1 LMAC then it can have up to 32
filters.
Above mentioned filter table is used to install unicast and multicast
DMAC address filters. Unicast filters are installed via
rte_eth_dev_mac_addr_add API while multicast filters are installed
via rte_eth_dev_set_mc_addr_list API.
So in total, supported MAC filters are equal to DMAC filters plus
mcast filters.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Adding initial version of rte_flow support for cnxk family device.
Supported rte_flow ops are flow_validate, flow_create, flow_destroy,
flow_flush, flow_query, flow_isolate.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
