This patch adds new phy types for 25G Active Optical Cables (AOC) and
Active Copper Cables (ACC) support.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Store information about FEC modes, that were requested. It will be used
in printing link status information function and this way there is no
need to call admin queue there.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
During NVMupdate, state machine gets into unrecoverable state because
i40e_clean_adminq_subtask can get scheduled after the admin queue
command but before other state variables are updated.
This patch adds locking around admin queue command and update of
state variables so that adminq_subtask will have accurate information
whenever it gets scheduled.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Modify the necessary files to be compatible with the new virtchnl.h file
instead of relying on i40e_virtchnl.h variant. This mostly changes
references to VIRTCHNL_ variables by removing prefix of I40E_.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
According to the standard, state machine of LACP should transmit lacpdu
when partner's state changes from slow to fast, rather than from fast
to slow.
Fixes: 46fb436836 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: Sha Zhang <zhangsha.zhang@huawei.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
When a port is using a bogus SFP, the PCI probing returns an error,
preventing to register a portid.
To give a better chance to the applications to retry after the SFP is
changed, move this check in eth_i40e_dev_configure(), so that only a
port reconfiguration is needed to retry.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Cleanup the DMA map logic for memsegs. Earlier, in case
DMA mapping reaching end of segment, it reports a spurious error.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Correct the while condition for cleanup in case of failure.
Fixes: a0d5c9caf0 ("bus/fslmc: add frame queue based dq storage")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
changing the NXP DPDK helper repository from helper to extras.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Configuring the MC FW to configure data alignment by default.
This help in improving performance for some of the platform variants.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
After adding a fdir rule for IPv6 with input set TC, IPv6 packets
with the specific TC can't be assigned the right queue.
The root cause is that TC is parsed wrongly, this patch fixes
TC parsing problem.
Fixes: 7d83c152a2 ("net/i40e: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Fm10k host driver can't manage PHY directly and provides a fake link
status by always reporting LINK_UP. We should initialize link status
in device start, otherwise application will get LINK_DOWN status
when LSC configured.
Fixes: 9ae6068c86 ("fm10k: add dev start/stop")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
In case on multi segment packet, the TSO segment size
was taken from the last segment. This may lead to incorrect
values in case not all segments are initialized with the field.
Fixing it by taking the value from the first segment.
Fixes: 3f13f8c23a ("net/mlx5: support hardware TSO")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The interrupt handler can sometimes be triggered for reasons other than a
link status event. An assertion failure happen when such events occur while
an asynchronous link status update is already scheduled.
Address this issue using the same approach as its mlx5 counterpart,
commit a9f2fbc42f ("net/mlx5: fix inconsistent link status")
Fixes: c4da6caa42 ("mlx4: handle link status interrupts")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
igb flex filter supports recognizing any arbitrary pattern within first
128 bytes of the packet.
But the macro E1000_FLEX_FILTERS_MASK_SIZE only covers first 64 bytes.
Fixes: 231d43909a ("igb: migrate flex filter to new API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
There is a bug in flex type filter parsing because of wrong local
variable index usage.
Bug cause filter to fail and wrong mask calculation.
Fixes: 7cd77faf71 ("net/igb: parse flow API flex filter")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
This commit addresses various issues that may lead to undefined behavior
when configuring Rx interrupts.
While failure to create a Rx queue completion channel in rxq_ctrl_setup()
prevents that queue from being created, existing queues still have theirs.
Since the error handler disables dev_conf.intr_conf.rxq as well, subsequent
calls to rxq_ctrl_setup() create Rx queues without interrupts. This leads
to a scenario where not all Rx queues support interrupts; missing checks on
the presence of completion channels may crash the application.
Considering that the PMD is not supposed to disable user-provided
configuration parameters (dev_conf.intr_conf.rxq), and that these can
change for subsequent rxq_ctrl_setup() calls anyway, properly supporting a
mixed mode where not all Rx queues have interrupts enabled is a better
approach.
To do so with a minimum set of changes, priv_intr_efd_enable() and
priv_create_intr_vec() are first refactored as a single
priv_rx_intr_vec_enable() function (same for their "disable" counterparts).
Since they had to be used together, there was no point in keeping them
separate.
Remaining changes:
- Always clean up before reconfiguring interrupts to avoid memory leaks.
- Always clean up when closing the device.
- Use malloc()/free() instead of their rte_*() counterparts since there is
no need to store the vector in huge pages-backed memory.
- Allow more Rx queues than the size of the event file descriptor array as
long as Rx interrupts are not requested on all of them.
- Properly clean up interrupt handle when disabling Rx interrupts (nb_efd
and intr_vec reset to 0).
- Check completion channel presence while toggling Rx interrupts on a given
queue.
Fixes: 3c7d44af25 ("net/mlx5: support user space Rx interrupt event")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
A negative return value is documented for that function in case of error.
Fixes: 3c7d44af25 ("net/mlx5: support user space Rx interrupt event")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Not exposing Rx interrupts callbacks when this feature is unsupported is
less intrusive than having two different versions for these functions.
Fixes: 3c7d44af25 ("net/mlx5: support user space Rx interrupt event")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
These functions do not belong to the data path. Their prototypes are also
misplaced.
Fixes: 3c7d44af25 ("net/mlx5: support user space Rx interrupt event")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit addresses various issues that may lead to undefined behavior
when configuring Rx interrupts.
While failure to create a Rx queue completion channel in rxq_setup()
prevents that queue from being created, existing queues still have theirs.
Since the error handler disables dev_conf.intr_conf.rxq as well, subsequent
calls to rxq_setup() create Rx queues without interrupts. This leads to a
scenario where not all Rx queues support interrupts; missing checks on the
presence of completion channels may crash the application.
Considering that the PMD is not supposed to disable user-provided
configuration parameters (dev_conf.intr_conf.rxq), and that these can
change for subsequent rxq_setup() calls anyway, properly supporting a mixed
mode where not all Rx queues have interrupts enabled is a better approach.
To do so with a minimum set of changes, priv_intr_efd_enable() and
priv_create_intr_vec() are first refactored as a single
priv_rx_intr_vec_enable() function (same for their "disable" counterparts).
Since they had to be used together, there was no point in keeping them
separate.
Remaining changes:
- Always clean up before reconfiguring interrupts to avoid memory leaks.
- Always clean up when closing the device.
- Use malloc()/free() instead of their rte_*() counterparts since there is
no need to store the vector in huge pages-backed memory.
- Allow more Rx queues than the size of the event file descriptor array as
long as Rx interrupts are not requested on all of them.
- Properly clean up interrupt handle when disabling Rx interrupts (nb_efd
and intr_vec reset to 0).
- Check completion channel presence while toggling Rx interrupts on a given
queue.
Fixes: 9f05a4b818 ("net/mlx4: support user space Rx interrupt event")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Moti Haimovsky <motih@mellanox.com>
Several Ethernet device structures are allocated on top of a common PCI
device for mlx4 adapters with multiple ports. These inherit a common
interrupt handle from their parent PCI device, which prevents Rx interrupts
from working properly on all ports as their configuration is overwritten.
Use a local interrupt handle to address this issue.
Fixes: 9f05a4b818 ("net/mlx4: support user space Rx interrupt event")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Moti Haimovsky <motih@mellanox.com>
This patch demonstrates how to get information about dynamic device
personalization (DDP) profile.
Command 'ddp get info (path_to_profile)' extracts and prints
information about the given profile.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
On mlx5 PMD Flow pattern without any specific vlan will match for vlan
packets as well.
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
With this patch, it is possible to enable or disable the isolate
feature anytime, even immediately after a probe while the tap has not
been configured yet. It will do its job as soon as the netdevice gets
created.
A specific implicit flow rule is created with the lowest priority (all
other flow rules will be evaluated before), at the end of the list. If
isolated mode is enabled, the associated action will be to drop the
packet. Otherwise, the action would be passthrough.
In case of a remote netdevice, implicit rules on it will be removed in
isolated mode, to ensure only actual flow rules redirect packets to the
tap.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Drop flows being created when the port is stop should not access to the
drop table hash queues as it is invalid.
Fixes: 028761059a ("net/mlx5: use an RSS drop queue")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Add release notes update to announce support of rte_flow on igb NIC.
And update NIC features document for this feature.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Macro for alignment is defined in the common library.
Use macro from the common library in own macro definition.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Hardware PTYPE in Rx desc will be parsed to fill mbuf's packet_type.
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The current drop action is implemented as a queue tail drop,
requiring to instantiate multiple WQs to maintain high drop rate.
This commit, implements the drop action in hardware classifier.
This enables to reduce the amount of contexts needed for the drop,
without affecting the drop rate.
Signed-off-by: Shachar Beiser <shacharbe@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Add parameter to print port statistics periodically
(disabled by default), if interactive mode is not enabled.
This is useful to allow the user to see port statistics
without having to get into the internal command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add parameter to start forwarding sending first
a burst of packets, which is useful when testing
a loopback connection.
This was already implemented as an internal command,
but adding it as a parameter is interesting, as it
allows the user to test a loopback connection without
entering in the internal command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
In some environments, the PCI domain can be larger than 16 bits.
For example, a PCI device passed through in Azure gets a synthetic domain
id which is internally generated based on GUID. The PCI standard does
not restrict domain to be 16 bits.
This change breaks ABI for API's that expose PCI address structure.
The printf format for PCI remains unchanged, so that on most
systems (with only 16 bit domain) the output format is unchanged
and is 4 characters wide. For example: 0000:00:01.0
Only on sysetms with higher bits will the domain take up more
space; example: 12000:00:01.0
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The function strtoul returns unsigned long and can be directly
assigned to a smaller type. Removing the casts allows easier
expansion of PCI domain.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
