After memory optimization, some action object handles are changed to
index to save the overhead. Assertion in debug mode will be helpful
for trouble shooting.
In the current implementation, only one port action is supported in
switchdev mode for one device flow. In debug mode, an assertion will
be used to check the if the port action is none, and it should
locate before the port action resource registration but not after
it. The action index in the handle should be 0 before registration.
Or else it will always cause a failure because the port action is
registered and the index is not 0.
Fixes: f3faf9ea1185 ("net/mlx5: convert port id action to indexed")
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Reviewed-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Currently, the shared counter search uses the wrong nested index which
is used by the pool index. The incorrect nested index using causes the
search go to incorrect counter pool is not existed.
Add the counter index to fix the incorrect nested use case.
Fixes: 4001d7ad26d4 ("net/mlx5: change Direct Verbs counter to indexed")
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The doorbell record is organized with page and bitmap. When some new
doorbell needs to be associated with a queue, the bit will be set
in the bitmap to indicate the corresponding doorbell occupied. A
counter is used to record the number of doorbell occupied to speed
up the searching.
If the number reaches the maximal value of a pre-defined number of a
page, a new page will be allocated. If not, then the bitmap will be
checked to find a free one.
The LSHIFT and OR (AND NOT) operations are used to update the bitmap
of a page. But 1 will be treated as a signed integer when compiling.
When the shift number is 31, the shifted value will be considered as
negative. Then a wrong extension will be done when setting it to a
64-bits variable. All the upper 32-bits will be set to 1 by such
extension.
Then a wrong offset value will be calculated because of this. The
next 64 bits will be also treated as the bitmap and get corrupted
through the bit set operation.
The immediate value 1 needs to be used as 64 bits width explicitly.
Fixes: 21cae8580fd0 ("net/mlx5: allocate door-bells via DevX")
Cc: stable@dpdk.org
Signed-off-by: Bing Zhao <bingz@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When create the Verbs flows with counter, randomly SEGSEV will also
comes. The reason is that the counter pool memory is not allocated
sufficiently and initialized correctly in Verbs case.
As the mlx5_flow_counter array member is moved out of the counter pool
struct, the counter pool memory layout currently contain implicitly
with mlx5_flow_counter, mlx5_age_param(if the pool is an age pool),
mlx5_flow_counter_ext(if the pool is a none batch pool). When allocate
the pool memory, the pool size should be calculated based on the pool
type accordingly.
Currently, for Verbs counter pool, both mlx5_flow_counter and
mlx5_flow_counter_ext need to be taken into account in the pool size.
And the pool type should also be initialized as CNT_POOL_TYPE_EXT.
This patch add the missing size and type for the Verbs counter pool.
Fixes: 8d93c830e450 ("net/mlx5: modify ext-counter memory allocation")
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
CVL kernel PF configures all reserved queues for VF, including
Rx queue RXDID. The number of reserved queues is the maximum
between Tx and Rx queues. If the number of the enabled Rx queues
is less than that of reserved queues, required RXDID will only
be set for those enabled, but default value (0) is set for others.
However, RXDID 0 (legacy 16byte descriptor) is not supported now,
PF will return error when configuring those disabled VF queues.
In this patch, required RXDID is set for all reserved Rx queues,
no matter enabled or not. In this way, PF will configure Rx
queues correctly without reporting error.
Fixes: b8b4c54ef9b0 ("net/iavf: support flexible Rx descriptor in normal path")
Signed-off-by: Ting Xu <ting.xu@intel.com>
Tested-by: Xiaoxiao Zeng <xiaoxiaox.zeng@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This patch fixes the issue that the queue region does not
take effect due to incorrectly setting the flow type.
Fixes: ecad87d22383 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Reviewed-by: Jeff Guo <jia.guo@intel.com>
Tested-by: Hailin Xu <hailinx.xu@intel.com>
Tested-by: Lunyuan Cui <lunyuanx.cui@intel.com>
This patch adds support for FDIR passthrough mode. When FDIR rule
hits, FDIR just forward this packet to the next stage filter.
Fixes: 55daca4e45fc ("net/ice/base: change function to static")
Signed-off-by: Simei Su <simei.su@intel.com>
Tested-by: Xiaoxiao Zeng <xiaoxiaox.zeng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix to allocate bnxt ulp context when TRUFLOW is enabled.
This patch reduces the size of struct bnxt.
Fixes: 313ac35ac701 ("net/bnxt: support ULP session manager init")
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are maintaining MAC address twice which is unnecessary.
This patch removes the copy which helps reduce size of bnxt structure.
Fixes: b7778e8a1c00 ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There is no need to maintain local copy.
This helps reduce the size of the bnxt structure.
Fixes: fcc0aa1edc10 ("net/bnxt: add RSS hash configuration")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Consolidate flow stat related structs for performance improvement.
The intention of this patch is to reduce the size struct bnxt which
had grown because of recent changes and was impacting performance.
Fixes: 02a95625fe9c ("net/bnxt: add flow stats in extended stats")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Log the command sequence number to aid debug in case of a
FW command timeout.
Fixes: 804e746c7b73 ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
This patch fixes deallocation of all fastpath resources unconditionally,
when re-configuring the device. When re-allocating resources PMD depends
on application to explicitly setup the Rx/Tx queue.
Deallocation of all the resources is only required if the Rx/Tx queue
configuration changes. For other scenarios like KNI MTU change we'd keep
existing configuration.
Fixes: 8de0c4201926 ("net/qede: fix odd number of queues usage in 100G mode")
Fixes: dd28bc8c6ef4 ("net/qede: fix VF port creation sequence")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Fix to assign dummy Rx/Tx handlers in dev_stop.
For MTU set, assignment of the appropriate Rx/Tx handlers will be
handled by dev_start/dev_stop.
Fixes: 81f8804992c9 ("net/qede: enhance Rx CPU utilization")
Fixes: 8de0c4201926 ("net/qede: fix odd number of queues usage in 100G mode")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Event notification should be disabled after virtqueue initialization and
enabled by calling rte_eth_dev_rx_intr_enable later. When virtio user
device reconnecting to vhost, virtqueue_disable_intr should be called to
disable event notification.
Fixes: 6ebbf4109f35 ("net/virtio-user: fix packed ring server mode")
Cc: stable@dpdk.org
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Runtime checks for vectorized datapath are organized into device
configuration function. Remove duplicated check in device init
function.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Before updating RSS indirection table, firstly determine whether
rq num in RETA table is legal, if it is invalid(such as exceeding
the maximum rxq num), driver will not update hw indirection
table and return fail.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
The patch modifies the comments of structures or functions, and adds
space for comments, removes extra empty lines and adjusts the
print level for VF branches in one sdk interface.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
When copy a mbuf to a new dst_mbuf, the pkt_len member of
dst_mbuf needs to be updated.
Fixes: 076221c8fe1d ("net/hinic: add Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Adds tx_queues and rx_queues non-null judgment before free tx or
rx resources, because some app may set tx_queues or rx_queues to
be null before call free resource interfaces, which may cause
a segfault.
Fixes: 64727024d2fd ("net/hinic: add device initialization")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
The VMXNet3 protocol has a start-of-packet (SOP) and end-of-packet (EOP)
marker. If there was a bug where mbuf arrived without SOP the code that
chains the mbuf would dereference a null pointer.
Also, record any mbuf's dropped in statistics.
Although did the initial code no longer have access to VMware.
Compile tested only!
Coverity issue: 124563
Fixes: 8ee787ce80a8 ("vmxnet3: remove asserts that confuse coverity")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yong Wang <yongwang@vmware.com>
Previous patch added support of VLAN item without VLAN ID value,
i.e. using wildcard VLAN item, to match VLAN with any VLAN ID.
The implication on VLAN actions was not taken into consideration.
VLAN actions (e.g. push vlan) use the VLAN ID value in the VLAN item,
and expect it to be valid.
This patch updates function flow_dev_get_vlan_info_from_items() to
check the VLAN item contents before trying to use it.
Fixes: 92818d839e8e ("net/mlx5: fix match on empty VLAN item in DV mode")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The design of counter container resize used double buffer algorithm in
order to synchronize between the query thread to the control thread.
When the control thread detected resize need, it created new bigger
buffer for the counter pools in a new container and change the container
index atomically.
In case the query thread had not detect the previous resize before a new
one need was detected by the control thread, the control thread returned
EAGAIN to the flow creation API used a COUNT action.
The rte_flow API doesn't allow unblocked commands and doesn't expect to
get EAGAIN error type.
So, when a lot of flows were created between 2 different periodic
queries, 2 different resizes might try to be created and caused EAGAIN
error.
This behavior may blame flow creations.
Change the synchronization way to use lock instead of double buffer
algorithm.
The critical section of this lock is very small, so flow insertion
rate should not be decreased.
Fixes: ebbac312e448 ("net/mlx5: resize a full counter container")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Move link state enable/disable to dev_start() and dev_stop()
respectively. This will ensure when devices are stopped,
link status will be appropriately shown as down.
Fixes: dd28bc8c6ef4 ("net/qede: fix VF port creation sequence")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
This patch fixes the issue that failed to create an RSS rule with type
L2-payload.
Fixes: feaae285b342 ("net/i40e: support hash configuration in RSS flow")
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Tested-by: Hailin Xu <hailinx.xu@intel.com>
Reviewed-by: Jeff Guo <jia.guo@intel.com>
When configure RSS rule, the etherdev rss hash function type should be
mapped to the corresponding virtchnl rss algorithm type.
Fixes: 7be10c3004be ("net/iavf: add RSS configuration for VF")
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When the driver is loaded on a 200G NIC, the port speed is not
displayed correctly. Parse the 200G speed before displaying it.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Relaxed ordering is a PCI optimization that enables reordering
reads/writes in order to improve performance.
Relaxed ordering was enabled for all processors causing
a degradation in performance in Haswell and Broadwell processors
that don't support this optimization.
In order to avoid that we check if the processor is Haswell
or Broadwell and if so we disable relaxed ordering.
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
In order to improve performance relaxed ordering was enabled
when creating count object using Devx.
Currently rte enables this optimization by default when using
Devx.
This causes an issue when using firmware that does not have this
capability causing a count object failure.
In order to fix this issue a check of firmware capabilities was
added before enabling relaxed ordering.
Fixes: 53ac93f71ad1 ("net/mlx5: create relaxed ordering memory regions")
Signed-off-by: Shiri Kuzin <shirik@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch fixes the issue that the flow which both source MAC mask
and destination MAC mask are all zeros can not be created.
Fixes: ea0c22fd8227 ("net/i40e: enable MAC address as flow director input set")
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Tested-by: Hailin Xu <hailinx.xu@intel.com>
Reviewed-by: Jeff Guo <jia.guo@intel.com>
The register autoneg can't be updated synchronously with flow control
mode setting in the state of port start, so NIC statistics error occurs.
AUTO_NEG Advt register should be updated by ixgbe_setup_fc() when
enabling flow control.
The patch fixes the issue.
Fixes: a524f550da6e ("net/ixgbe: fix flow control mode setting")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Reviewed-by: Wei Zhao <wei.zhao1@intel.com>
Currently, DevX API is used to create Rx objects (RQ, RQT, TIR) only
if LRO or hairpin features are enabled on this RQ.
This patch uses DevX API by default, if DevX is supported and can be
used. Otherwise, Verbs API is used.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Fix coverity defects of unused value.
Coverity issue: 357745, 357769
Fixes: b8b4c54ef9b0 ("net/iavf: support flexible Rx descriptor in normal path")
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Fix some out-of-bounds memory issues, they may lead to wrong results
or affect application stability.
Coverity issue: 357759, 357713
Fixes: bd3fcf0d0fa1 ("net/igc: support RSS")
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Reviewed-by: Jeff Guo <jia.guo@intel.com>
Update max packet length supported by Inline IPsec Rx to
NIX_MAX_FRS
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
The AVX512 packed ring datapath selection was only done
at build time, but it should also be checked at runtime
that the CPU supports it.
This patch add a CPU flags check so that non-vectorized
path is selected at runtime if AVX512 is not supported.
Also in meson build enable vectorization only for relevant file, not for
all driver.
Fixes: ccb10995c2ad ("net/virtio: add election for vectorized path")
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
If hardware mode for this card does not support nic,
the network features for this card will not be supported
and driver will be initialized failed.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch adds to MLX5 PMD the support of matching on
GTP header item v_pt_rsv_flags.
This item is contained in 1 byte of the format:
-------------------------------------------
| bit | 0 - 2 | 3 | 4 | 5 | 6 | 7 |
|-----------------------------------------|
| value | Version | PT | Res | E | S | PN |
-------------------------------------------
Matching is supported only for GTP flags E, S, PN.
Therefore values 0 to 7 are supported.
Mask must be set accordingly:
... gtp v_pt_rsv_flags is 1 v_pt_rsv_flags mask 0x07 ...
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Program received signal SIGSEGV, Segmentation fault.
0x00000000008ef7c4 in mlx5_tx_queue_release (dpdk_txq=0x17ce01680) at
drivers/net/mlx5/mlx5_txq.c:302
301 mlx5_txq_release(ETH_DEV(priv), i);
302 DRV_LOG(DEBUG, "port %u removing Tx queue %u from list",
303 PORT_ID(priv), txq->idx);
The problem is txq is freed inside the mlx5_txq_release() function
and no longer valid in the debug log right after this invocation.
Move the debug log before the mlx5_txq_release() function to fix this.
Fixes: a6d83b6a9209 ("net/mlx5: standardize on negative errno values")
Cc: stable@dpdk.org
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The function mlx4_drop_get() creates pointer to a struct mlx4_drop and
if needed allocates by rte_malloc.
If the allocation is failed the function goes to label “error”, and
there does dereference to a null pointer.
Skip resources cleaning when the memory allocation is failed.
Coverity issue: 146206
Coverity issue: 146146
Fixes: d3a7e09234e4 ("net/mlx4: allocate drop flow resources on demand")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The mlx5_flow_get_reg_id() function translates tag ID to register
from the registers that are supported and available for use. The
user does not know which register is available at a time and therefore
there is an array that represents mapping to the available registers.
Usually the free registers are continuous in the flow_mreg_c array but
sometimes the mtr_color_reg register is between them and it must be
skipped and the next register returned, in which case the function
returns the mapping of the next entity in the array.
When the function reads from the next entity in the array, it does not
check whether such an entity exists and in some situation invalid access
to memory occurs beyond the array boundaries.
So, when all the registers are valid from HW perspective and the meter
color register is not the default, the tag id 5 causes an out of bound
access.
Validate registers availability when meter color register is not the
default.
Coverity issue: 146355
Fixes: 792e749e92d5 ("net/mlx5: fix register usage in meter")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When creating flow rule with zero specs it will cause
matching all UDP packets like following:
eth / ipv4 / udp / vxlan / end
Such rule will match all udp packets.
This change the behavior to match the dv flow engine
which will automatically set the match on relative
outer UDP port if the user didn't specify any.
Fixes: 84c406e74524 ("net/mlx5: add flow translate function")
Cc: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
