Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across net/bonding according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() return
value was changed from void to int, so this patch modify usage
of these functions across net/failsafe according to new return type.
Try to keep promiscuous mode consistent across all active
devices in the case of failure.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Change rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable()
return value from void to int and return negative errno values
in case of error conditions.
Modify usage of these functions across the ethdev according
to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Update ptype translation logic with ICMP6
in both outer and inner layers.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Extract and use layer type LB..LE for non-tunnel ptype and
LF..LH as tunnel ptype translation.
Fixes: 6e892eabce ("net/octeontx2: support packet type")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch fixes configuration for port Tx vlan insertion feature.
As per latest Tx KEX profile, pf_func should be at
KW[0](47:32) and not KW[1](63:48).
Fixes: 168c59cfe4 ("net/octeontx2: add flow MCAM utility functions")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The function `rte_eth_dev_get_supported_ptypes` expects the underlying
ethernet device to return array of supported ptypes. The ethernet device
needs to set `RTE_PTYPE_UNKNOWN` as the last element which signifies
thats its the end of the ptype array.
Else the function `rte_eth_dev_get_supported_ptypes` might overflow.
Fixes: 6e892eabce ("net/octeontx2: support packet type")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
CNF95XX SoC part is not available for general availability.
Update the documentation to reflect the status.
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
We need to close the old slave request fd if any first
before taking the new one.
Fixes: 275c3f9447 ("vhost: support slave requests channel")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds an operation callback which gets called every time
the library is waking up the guest trough an eventfd_write() call.
This can be used by 3rd party application, like OVS, to track the
number of times interrupts where generated. This might be of
interest to find out system-call were called in the fast path.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Added the file virtio_rxtx_simple_altivec.c which implements Altivec
code for the virtio vectorized RX functions. Updated the various build
files.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds the feature that supports loading DDP package
according to the device serial number. Prior to loading the
default DDP package (ice.pkg), the driver will check for the
presence of a device-specific DDP package with the name containing
64-bit PCIe Device Serial Number (ice-xxxxxxxxxxxxxxxx.pkg)
during initialization. Users can use "lspci -vs" to get the device
serial number.
The pkg search path are /lib/firmware/updates/intel/ice/ddp/
and /lib/firmware/intel/ice/ddp/. If the package exists,
the driver will download it to the device instead of the default
one. The loaded package type (OS default and COMMS) will be
stored in ice_adapter->active_pkg_type. The package version is
stored in ice_hw->active_pkg_ver.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When looking for an existing recipes, never choose an inverse
recipe as these are used for anti-spoofing. Choosing inverse
recipes for source MAC address rules was causing errors while
adding the rule.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Correctly update profile to recipe bitmap array after adding and
associating recipes. This fixes an issue where determining unused
recipe result index slots was incorrect.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add Geneve offset for tunneled packets to allow dummy packets to be
properly created.
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add these two ptype(MAC_PPPOD_PAY and MAC_PPPOE_PAY) in outer mac
bitmap, so it can hash for outer mac.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Removing Rx flex descriptor metadata and flag programming from the code,
these registers cannot be written to as they are read only.
The programming for all fields per RxDID is now handled differently.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add AQC get link topology handle support. This is needed to determine
Direct Attach (DA) or backplane media type for PHY types that support
either. Get link topology handle cage node type request can be used to
determine if a cage is present or not. If a cage is present for PHY
types that supports both DA and backplane media type, then the media
type is DA, else the media type is backplane.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Shorten the delay for SQ responses, but increase the number of loops.
Max delay time is unchanged, but some operations complete much more
quickly.
In the process, add a new define to make the delay count and delay time
more explicit, and simplify the code so it's the same for both switch
and NIC mode. Add comments to make things more explicit.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Use BIT_ULL() instead of ICE_FLOW_HASH_FLD() which does the same bit shift
operation.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Added register definitions for GL_MDCK_TX_TDPU and GL_MDET_TX_TDPU.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Correct abbreviation issues found by running abbrevcheck.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
We are already in the branch "if (fm_list->vsi_count == 1)"
no need to exit and re-enter.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
We don't need to find a dummy packet when removing a rule so remove
the call to get the dummy packet. This also obviates some variables
so remove them also.
Also reduce the scope of rule_buf_sz.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This patch updates UDP tunneled training packets with an appropriate
UDP dest port. For the correct profile to be chosen, an open tunnel
port must be included in the training packet.
Added GENEVE tunnel labels in the test package in order to test GENEVE
tunnel rule creation.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Remove grouping rules to maximize the number of words placed into
a recipe line. This will allow more recipes to be added by reducing
the number of result indices required.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Currently ice_clear_vsi_promisc() detects if the VLAN ID sent is not 0
and sets the recipe_id to ICE_SW_LKUP_PROMISC_VLAN in that case and
ICE_SW_LKUP_PROMISC if the VLAN_ID is 0. However this doesn't allow VLAN
0 promiscuous rules to be removed, but they can be added. Fix this by
checking if the promisc_mask contains ICE_PROMISC_VLAN_RX or
ICE_PROMISC_VLAN_TX. This change was made to match what is being done
for ice_set_vsi_promisc().
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Removed setting Read flag in the Get Allocated Resource Descriptors AQ
command (0x020A). The read flag is not required for this command and
causes the FW to return an error.
Fixes: d781ccbdd1 ("net/ice/base: add functions to get allocated resources")
Cc: stable@dpdk.org
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
There is no reason to do this conditional check before the assignment so
simply remove it.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Added RSS support for PPPoE with inner TCP and UDP.
Added RSS support for GTPU with IPv4 and IPv6.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
RSS configurations calls currently support only non-tunneled packets,
which uses outer-first IPs. Adding another call to configure RSS for
tunneled packets which will enable hashing on inner-last IP. RSS hash
will only be done on the innermost IP.
- Update RSS configuration calls to take packet segment count as input
argument
- Update flow profile ID to include identifier for encapsulated packet
[0:31] : Packet match fields
[32:62]: Protocol header header
[63]: Encapsulation flag, 0 if non-tunneled, 1 if tunneled
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Before this patch, only outer IP with inner UDP port can appear in
RSS hash, because the extraction sequence uses outer IP protocol
ID with Inner UDP protocol ID. ICE_PROT_UDP_OF always extracts the
TUNNELED UDP port values (i.e., 4789 for VXLAN). ICE_PROT_UDP_IL_OR_S
will extract NON-TUNNELED UDP port or inner UDP port.
Fixes: aa1cd410fa ("net/ice/base: add flow module")
Cc: stable@dpdk.org
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This patch is an optimization to decrease the number of TCAM entries
used in the profile blocks, especially for RSS. To be most effective
this will also require a package change in order to decrease the number
of PTYPE groups necessary to program RSS, FD and ACL rules.
Change required package version to 1.3.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add ice_get_open_tunnel_port routine, which can be used to find
an open tunnel port for creating switch and flow director training
packets.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The patch move ice_ilog2 and ice_is_pow2 to ice_type.h, also add help
macro ROUND_UP and IS_ETHER_ADDR_EQUAL.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
When updating switch database with chained recipes from
firmware, where a null pointer derefence was occurring due to looking
into a sub-recipe entry which is not filled in.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Change UDP tunnel training packets for the switch to work for both
Geneve and VXLAN cases.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Modify ice_add_adv_rule to return an error when an invalid match
criteria is requested by the caller. This happens when the protocol
and offset pair is not supported by the package.
This change required a fix for the offset in the VXLAN GPE header,
and also found an issue with NVGRE where the package does not seem
to extract the correct offsets.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Change recipe to profile association logic to determine the profile type
to determine if a profile is compatible with the rule being added.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
For certain PTP clock adjustments, there is a use case for locking the
sideband queue at a higher level and performing an atomic series of
operations while the sideband queue is locked. To accommodate this use
case, split ice_sw_send_cmd() into a version that takes the lock and a
version that does not.
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
This function is needed by the driver to move PSM leaf nodes to a new
parent.
Additionally, add struct ice_aqc_move_txqs to struct ice_aq_desc so
driver code can access it.
Signed-off-by: Ben Shelton <benjamin.h.shelton@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The driver detects and warns about FW rollback mode before getting the NVM
version (through ice_init_nvm) which results in "0.00 0x0 0.0.0" being
printed. Fix this by calling ice_init_nvm earlier.
This could have been fixed by moving ice_print_rollback_msg as well, but
it made more sense to move ice_init_nvm closer to the flow that gets the
FW version information (i.e. control queue init flow).
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
To download the DDP file to the device, a PF first has to grab the
global configuration lock. When a PF can't grab this lock, set
hw->pkg_dwnld_status to ICE_AQ_RC_EEXIST.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add more opcode and macros:
1. Add opcode for the NVM Update EMPR command.
2. Add opcode for NVM save factory settings
3. Add opcode for NVM Write/Write Activate calls
4. Add loopback reporting to get link response macros
5. Add link event defines macros
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Currently the VLAN ice_flg64_bits are off by 1. Fix this by
setting the ICE_FLG_EVLAN_x8100 flag to 14, which also updates
ICE_FLG_EVLAN_x9100 to 15 and ICE_FLG_VLAN_x8100 to 16.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add 16-byte Flex RX descriptor structure definition.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Improve code orgnization, move declaration of ice_cfg_tc_nod_bw_alloc and
ice_cfg_rl_burst_size from ice_common.h to ice_nvm.h.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
