Picking a company stock ticker for a PMD name might not be a best approach
in a long run since name is too generic.
This patch addresses that and renames mrvl to mvsam.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Disable octeontx for gcc 4.8.5 as compiler is emitting "internal
compiler error" for aarch64.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
DPAA2 QDMA driver uses MC DPDMAI object. This driver enables
the user (app) to perform data DMA without involving CPU in
the DMA process
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The IFCVF vDPA (vhost data path acceleration) driver provides support for
the Intel FPGA 100G VF (IFCVF). IFCVF's datapath is virtio ring compatible,
it works as a HW vhost backend which can send/receive packets to/from
virtio directly by DMA.
Different VF devices serve different virtio frontends which are in
different VMs, so each VF needs to have its own DMA address translation
service. During the driver probe a new container is created, with this
container vDPA driver can program DMA remapping table with the VM's memory
region information.
Key vDPA driver ops implemented:
- ifcvf_dev_config:
Enable VF data path with virtio information provided by vhost lib,
including IOMMU programming to enable VF DMA to VM's memory, VFIO
interrupt setup to route HW interrupt to virtio driver, create notify
relay thread to translate virtio driver's kick to a MMIO write onto HW,
HW queues configuration.
- ifcvf_dev_close:
Revoke all the setup in ifcvf_dev_config.
Live migration feature is supported by IFCVF and this driver enables
it. For the dirty page logging, VF helps to log for packet buffer write,
driver helps to make the used ring as dirty when device stops.
Because vDPA driver needs to set up MSI-X vector to interrupt the
guest, only vfio-pci is supported currently.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The manager provides a way to allocate physically and virtually
contiguous set of objects.
Signed-off-by: Artem V. Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
On FreeBSD, make defconfig generates the config as
"defconfig_x86_64-bsdapp-", which does not resolve to any known
config file.
On FreeBSD, we get amd64 out of "uname -m", which was not handled by
the list of checks, but which now resolves to x86_64-native.
Then we run '$CC --version', and use grep -o with the list of known
compilers, and set to either gcc, icc or clang. Grep's '-o' option
returns the matched word rather than the whole line, making the
result easier to use.
The remaining code in the patch then takes ${compiler}, the "uname -m"
output and assembles them all together into a valid freebsd config name,
i.e. "defconfig_x86_64-native-bsdapp-clang".
Fixes: bce6c42c4a ("mk: add sensible default target with defconfig")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Tested-by: Anatoly Burakov <anatoly.burakov@intel.com>
The virtio crypto device is a virtual cryptography device
as well as a kind of virtual hardware accelerator for
virtual machines. The linux kernel virtio-crypto driver
has been merged, and this patch introduces virtio crypto
PMD to achieve better performance.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Fan Zhang <roy.fan.zhang@intel.com>
Adds support for the v0.49 of the IPsec Multi-buffer lib,
which now gets compiled and installed as a shared object.
Therefore, there is no need to pass the AESNI_MULTI_BUFFER_LIB_PATH
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adds support for the v0.49 of the IPsec Multi-buffer lib,
which now gets compiled and installed as a shared object.
Therefore, there is no need to pass the AESNI_MULTI_BUFFER_LIB_PATH
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The introduction of the event timer adapter library adds a dependency
on the rte_timer library from the rte_eventdev library. Update the
order so that the timer library comes after the eventdev library in the
linker command when statically linking applications.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Replace the BSD license header with the SPDX tag for files
with only an RehiveTech copyright on them.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Move commonly used functions across mempool, event and net devices to a
common folder in drivers.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The strncpy function is error prone for doing "safe" string copies, so
we generally try to use "snprintf" instead in the code. The function
"strlcpy" is a better alternative, since it better conveys the
intention of the programmer, and doesn't suffer from the non-null
terminating behaviour of it's n'ed brethern.
The downside of this function is that it is not available by default
on linux, though standard in the BSD's. It is available on most
distros by installing "libbsd" package.
This patch therefore provides the following in rte_string_fns.h to ensure
that strlcpy is available there:
* for BSD, include string.h as normal
* if RTE_USE_LIBBSD is set, include <bsd/string.h>
* if not set, fallback to snprintf for strlcpy
Using make build system, the RTE_USE_LIBBSD is a hard-coded value to "n",
but when using meson, it's automatically set based on what is available
on the platform.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The name "mrvl" for Marvell PMD driver for PPv2 Marvell PPv2
(Packet Processor v2) 1/10 Gbps adapter is too generic and causes
problem for adding new PMD drivers for other Marvell devices.
Changed to "mvpp2" for specific Marvell PPv2 PMD.
This patch doesn't introduce any change except renaming.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some kernel modules may need some header files to be "installed"
in the build directory.
When running multiple threads of make, kernel modules can try to
be compiled before the lib headers are ready:
make -j3
kernel/linux/kni/kni_misc.c:19:37: fatal error:
exec-env/rte_kni_common.h: No such file or directory
This error appeared recently after moving kernel modules in their
own directory.
Fixes: acaa9ee991 ("move kernel modules directories")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch fixes the build dependency of various
dpaaX components, when the dpaa or fslmc bus is disabled,
or VFIO is disabled.
Fixes: 1ee9569576 ("config: enable dpaaX drivers for generic ARMv8")
Cc: stable@dpdk.org
Reported-by: Yongseok Koh <yskoh@mellanox.com>
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Vertical spacing is lower before an item title than after.
So the items with paragraphs are not well separated.
A custom CSS is added to override the rtd theme.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
Code commit for 'make -f' support, breaks the build in cases where
entries in $(MAKEFILE_LIST) are absolute paths. This commit uses
notdir and firstword to ensure that only the local filename is used.
Fixes: 3a5c339d51 ("mk: support renamed Makefile in external project")
Cc: stable@dpdk.org
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
When mlx5 is not compiled directly as an independent shared object (e.g.
CONFIG_RTE_BUILD_SHARED_LIB not enabled for performance reasons), DPDK
applications inherit its dependencies on libibverbs and libmlx5 through
rte.app.mk.
This is an issue both when DPDK is delivered as a binary package (Linux
distributions) and for end users because rdma-core then propagates as a
mandatory dependency for everything.
Application writers relying on binary DPDK packages are not necessarily
aware of this fact and may end up delivering packages with broken
dependencies.
This patch therefore introduces an intermediate internal plug-in
hard-linked with rdma-core (to preserve symbol versioning) loaded by the
PMD through dlopen(), so that a missing rdma-core does not cause unresolved
symbols, allowing applications to start normally.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When mlx4 is not compiled directly as an independent shared object (e.g.
CONFIG_RTE_BUILD_SHARED_LIB not enabled for performance reasons), DPDK
applications inherit its dependencies on libibverbs and libmlx4 through
rte.app.mk.
This is an issue both when DPDK is delivered as a binary package (Linux
distributions) and for end users because rdma-core then propagates as a
mandatory dependency for everything.
Application writers relying on binary DPDK packages are not necessarily
aware of this fact and may end up delivering packages with broken
dependencies.
This patch therefore introduces an intermediate internal plug-in
hard-linked with rdma-core (to preserve symbol versioning) loaded by the
PMD through dlopen(), so that a missing rdma-core does not cause unresolved
symbols, allowing applications to start normally.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Skeleton rawdevice driver, on the lines of eventdev skeleton, is for
showcasing the rawdev library. This driver implements some of the
operations of the library based on which a test module can be
developed.
Design of skeleton involves a virtual device which is plugged into
VDEV bus on initialization.
Also, enable compilation of rawdev skeleton driver.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Each device in DPDK has a type associated with it - ethernet, crypto,
event etc. This patch introduces 'rawdevice' which is a generic
type of device, not currently handled out-of-the-box by DPDK.
A device which can be scanned on an installed bus (pci, fslmc, ...)
or instantiated through devargs, can be interfaced using
standardized APIs just like other standardized devices.
This library introduces an API set which can be plugged on the
northbound side to the application layer, and on the southbound side
to the driver layer.
The APIs of rawdev library exposes some generic operations which can
enable configuration and I/O with the raw devices. Using opaque
data (pointer) as API arguments, library allows a high flexibility
for application and driver implementation.
This patch introduces basic device operations like start, stop, reset,
queue and info support.
Subsequent patches would introduce other operations like buffer
enqueue/dequeue and firmware support.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The build system made a recursive call to "make" after
creating the build directory. This recursive call used
the hard-coded filename "Makefile", which prevented
builds from working if the file was renamed and make
called using "make -f". Taking the filename from
MAKEFILES_LIST make variable fixes this.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
Add checks during build to ensure that all symbols in the EXPERIMENTAL
version map section have __experimental tags on their definitions, and
enable the warnings needed to announce their use. Also add an
ALLOW_EXPERIMENTAL_APIS define to allow individual libraries and files
to declare the acceptability of experimental api usage
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch lays the groundwork for this driver (draft documentation,
copyright notices, code base skeleton and build system hooks). While it can
be successfully compiled and invoked, it's an empty shell at this stage.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
OPDL ring is the core infrastructure of OPDL PMD. OPDL ring library
provide the core data structure and core helper function set. The Ring
implements a single ring multi-port/stage pipelined packet distribution
mechanism. This mechanism has the following characteristics:
• No multiple queue cost, therefore, latency is significant reduced.
• Fixed dependencies between queue/ports is more suitable for complex.
fixed pipelines of stateless packet processing (static pipeline).
• Has decentralized distribution (no scheduling core).
• Packets remain in order (no reorder core(s)).
* Update build system to enable compilation.
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: Peter Mccarthy <peter.mccarthy@intel.com>
Reviewed-by: Seán Harte <seanbh@gmail.com>
- bbdev 'turbo_sw' is the software accelerated version of 3GPP L1
Turbo coding operation using the optimized Intel FlexRAN SDK libraries.
- 'turbo_sw' pmd is disabled by default
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
- 'bbdev_null' is a basic pmd that performs a minimalistic
bbdev operation
- useful for bbdev smoke testing and in measuring the overhead
introduced by the bbdev library
- 'bbdev_null' pmd is enabled by default
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
- wireless baseband device (bbdev) library files
- bbdev is tagged as EXPERIMENTAL
- Makefiles and configuration macros definition
- bbdev library is enabled by default
- release notes of the initial version
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace the BSD license header with the SPDX tag for Makefiles
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Move the vdev bus from lib/librte_eal to drivers/bus.
As the crypto vdev helper function refers to data structure
in rte_vdev.h, so we move those helper function into drivers/bus
too.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Revert the patchset run-time Linking support including the following
3 commits:
Fixes: 84cc318424 ("eal/x86: select optimized memcpy at run-time")
Fixes: c7fbc80fe6 ("test: select memcpy alignment unit at run-time")
Fixes: 5f180ae329 ("efd: move AVX2 lookup in its own compilation unit")
The patchset would cause perf drop in vhost/virtio loopback performance
test. Because the run-time dispatch must cost at least a function call
comparing to the compile-time dispatch. And the reference cpu cycles value
is small. And in the test, when using 128-256 bytes packet, it would cause
16%-20% perf drop with mergeble path. When using 256 bytes packet, it would
cause 13% perf drop with vector path.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The following APIs's are implemented in the
librte_flow_classify library:
rte_flow_classifier_create
rte_flow_classifier_free
rte_flow_classifier_query
rte_flow_classify_table_create
rte_flow_classify_table_entry_add
rte_flow_classify_table_entry_delete
The following librte_table API's are used:
f_create to create a table.
f_add to add a rule to the table.
f_del to delete a rule from the table.
f_free to free a table
f_lookup to match packets with the rules.
The library supports counting of IPv4 five tupple packets only,
ie IPv4 UDP, TCP and SCTP packets.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
This patch dynamically selects functions of memcpy at run-time based
on CPU flags that current machine supports. This patch uses function
pointers which are bind to the relative functions at constrctor time.
In addition, AVX512 instructions set would be compiled only if users
config it enabled and the compiler supports it.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch dissociates single-queue indirection tables and hash QP objects
from Rx queue structures to relinquish their control to users through the
RSS flow rule action, while simultaneously allowing multiple queues to be
associated with RSS contexts.
Flow rules share identical RSS contexts (hashed fields, hash key, target
queues) to save on memory and other resources. The trade-off is some added
complexity due to reference counters management on RSS contexts.
The QUEUE action is re-implemented on top of an automatically-generated
single-queue RSS context.
The following hardware limitations apply to RSS contexts:
- The number of queues in a group must be a power of two.
- Queue indices must be consecutive, for instance the [0 1 2 3] set is
allowed, however [3 2 1 0], [0 2 1 3] and [0 0 1 1 2 3 3 3] are not.
- The first queue of a group must be aligned to a multiple of the context
size, e.g. if queues [0 1 2 3 4] are defined globally, allowed group
combinations are [0 1] and [2 3]; groups [1 2] and [3 4] are not
supported.
- RSS hash key, while configurable per context, must be exactly 40 bytes
long.
- The only supported hash algorithm is Toeplitz.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
A race condition can happen during parallel builds, where a header
might be installed in RTE_OUT/include before CFLAGS is recursively
expanded. This causes GCC to sometimes pick the header path as
SRCDIR/... and sometimes as RTE_OUT/include/... making the build
unreproducible, as the full path is used for the expansion of
__FILE__ and in the DWARF directory listing.
Installing all symlinks before all builds solves the problem. It is
still suboptimal, as the (fixed) path recorded in the DWARF dir
listing will include the user-configurable build output directory,
and thus will result in a different binary between different users
despite all other conditions being equal, but it is a simpler
approach that will anyway be obsolete once the build system is
switched to Meson.
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
In order to achieve reproducible builds, always use the same
order when listing object files to build dependencies lists.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
The result of find might not be stable depending on external
conditions.
Pipe it through LC_ALL=C sort to ensure reproducible results when
generating examples.dox.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
The output of wildcard might not be stable and depend on the
filesystem and other factors.
This means the content libdpdk.so linker script might change between
builds from the same sources.
Run the list through sort to ensure reproducibility.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Add mrvl net pmd driver skeleton providing base for the further
development. Besides the basic functionality QoS configuration is
introduced as well.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
MRVL net pmd needs rte_cfgfile to parse QoS configuration file thus
librte_pmd_mrvl.a contains undefined symbols from librte_cfgfile.a.
As a result linking applications under app/ directory will fail
because librte_cfgfile.a comes before librte_pmd_mrvl.a during
the linking stage.
Linking the whole librte_cfgfile.a solves the issue.
Signed-off-by: Jacek Siuda <jck@semihalf.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Generic Segmentation Offload (GSO) is a SW technique to split large
packets into small ones. Akin to TSO, GSO enables applications to
operate on large packets, thus reducing per-packet processing overhead.
To enable more flexibility to applications, DPDK GSO is implemented
as a standalone library. Applications explicitly use the GSO library
to segment packets. To segment a packet requires two steps. The first
is to set proper flags to mbuf->ol_flags, where the flags are the same
as that of TSO. The second is to call the segmentation API,
rte_gso_segment(). This patch introduces the GSO API framework to DPDK.
rte_gso_segment() splits an input packet into small ones in each
invocation. The GSO library refers to these small packets generated
by rte_gso_segment() as GSO segments. Each of the newly-created GSO
segments is organized as a two-segment MBUF, where the first segment is a
standard MBUF, which stores a copy of packet header, and the second is an
indirect MBUF which points to a section of data in the input packet.
rte_gso_segment() reduces the refcnt of the input packet by 1. Therefore,
when all GSO segments are freed, the input packet is freed automatically.
Additionally, since each GSO segment has multiple MBUFs (i.e. 2 MBUFs),
the driver of the interface which the GSO segments are sent to should
support to transmit multi-segment packets.
The GSO framework clears the PKT_TX_TCP_SEG flag for both the input
packet, and all produced GSO segments in the event of success, since
segmentation in hardware is no longer required at that point.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Membership library is an extension and generalization of a traditional
filter (for example Bloom Filter and cuckoo filter) structure.
In general, the Membership library is a data structure that provides a
"set-summary" and responds to set-membership queries of whether a
certain element belongs to a set(s). A membership test for an element
will return the set this element belongs to or not-found if the
element is never inserted into the set-summary.
The results of the membership test are not 100% accurate. Certain
false positive or false negative probability could exist. However,
comparing to a "full-blown" complete list of elements, a "set-summary"
is memory efficient and fast on lookup.
This patch adds the main API definition.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The -march=atom flag is for older atom CPUs and don't support SSE4 which
is the minimum requirement for DPDK. And in fact, the current atom CPUs
support SSE4. So this patch removes atom as a target for DPDK builds and
adds a silvermont replacement instead.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This removes the dependency on specific Mellanox OFED libraries by
using the upstream rdma-core and linux upstream community code.
Both rdma-core upstream and Mellanox OFED are Linux user-space packages:
1. Rdma-core is Linux upstream user-space package.(Generic)
2. Mellanox OFED is Mellanox's Linux user-space package.(Proprietary)
The difference between the two are the APIs towards the kernel.
Support for x86-32 is removed due to issues in rdma-core library.
ICC compilation will be supported as soon as the following patch is
integrated in rdma-core:
https://marc.info/?l=linux-rdma&m=150643474705690&w=2
Signed-off-by: Shachar Beiser <shacharbe@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Users can now use 'make defconfig' to generate a configuration using
the most appropriate defaults for the current machine.
<arch-machine-execenv-toolchain>
arch taken from uname -m
machine defaults to native
execenv is taken from uname, Linux=linuxapp, otherwise bsdapp
toolchain is taken from $CC -v to see which compiler to use
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
When using the compiler to link libraries, include EXTRA_CFLAGS. This is
needed when cross-compiling to pass --sysroot, for example. GCC
cross-compilers built with Yocto don't use the --with-sysroot option,
making it necessary to pass the --sysroot command-line option.
This is the same solution as in commit e8fbb6d9cf ("mk: use extra cflags
when linking with compiler"), but applied to libs instead of apps.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Introduce the fail-safe poll mode driver initialization and enable its
build infrastructure.
This PMD allows for applications to benefit from true hot-plugging
support without having to implement it.
It intercepts and manages Ethernet device removal events issued by
slave PMDs and re-initializes them transparently when brought back.
It also allows defining a contingency to the removal of a device, by
designating a fail-over device that will take on transmitting operations
if the preferred device is removed.
Applications only see a fail-safe instance, without caring for
underlying activity ensuring their continued operations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Used rte_log2_u32() to replace integer log2() to
remove libm dependency.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
NXP Copyright has been wrongly worded with '(c)' at various places.
This patch removes these extra characters. It also removes
"All rights reserved".
Only NXP copyright syntax is changed. Freescale copyright is not
modified.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Generic Receive Offload (GRO) is a widely used SW-based offloading
technique to reduce per-packet processing overhead. It gains
performance by reassembling small packets into large ones. This
patchset is to support GRO in DPDK. To support GRO, this patch
implements a GRO API framework.
To enable more flexibility to applications, DPDK GRO is implemented as
a user library. Applications explicitly use the GRO library to merge
small packets into large ones. DPDK GRO provides two reassembly modes.
One is called lightweight mode, the other is called heavyweight mode.
If applications want to merge packets in a simple way and the number
of packets is relatively small, they can use the lightweight mode.
If applications need more fine-grained controls, they can choose the
heavyweight mode.
rte_gro_reassemble_burst is the main reassembly API which is used in
lightweight mode and processes N packets at a time. For applications,
performing GRO in lightweight mode is simple. They just need to invoke
rte_gro_reassemble_burst. Applications can get GROed packets as soon as
rte_gro_reassemble_burst returns.
rte_gro_reassemble is the main reassembly API which is used in
heavyweight mode and tries to merge N inputted packets with the packets
in GRO reassembly tables. For applications, performing GRO in heavyweight
mode is relatively complicated. Before performing GRO, applications need
to create a GRO context object, which keeps reassembly tables of
desired GRO types, by rte_gro_ctx_create. Then applications can use
rte_gro_reassemble to merge packets. The GROed packets are in the
reassembly tables of the GRO context object. If applications want to get
them, applications need to manually flush them by flush API.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Replace the incorrect reference to "Cavium Networks", "Cavium Ltd"
company name with correct the "Cavium, Inc" company name in
copyright headers.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Since Intel Multi Buffer library for IPSec has been updated to
support Scatter Gather List, the AESNI GCM PMD can link
to this library, instead of the ISA-L library.
This move eases the maintenance of the driver, as it will
use the same library as the AESNI MB PMD.
It also adds support for 192-bit keys.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
armv8-a has optional CRYPTO extension which adds the
AES, PMULL, SHA1 and SHA2 capabilities. -march=armv8-a+crypto
enables code generation for the ARMv8-A architecture together
with the optional CRYPTO extensions.
Added the following flags to detect the corresponding
capability at compile time.
* RTE_MACHINE_CPUFLAG_AES
* RTE_MACHINE_CPUFLAG_PMULL
* RTE_MACHINE_CPUFLAG_SHA1
* RTE_MACHINE_CPUFLAG_SHA2
At run-time, the following flags can be used to detect the
capabilities.
* RTE_CPUFLAG_AES
* RTE_CPUFLAG_PMULL
* RTE_CPUFLAG_SHA1
* RTE_CPUFLAG_SHA2
Signed-off-by: Ashwin Sekhar T K <ashwin.sekhar@caviumnetworks.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
Increase the default baseline from "core2" architecture to "corei7". This
means that all builds will have SSE4.2 support included, and we can remove
special case manipulation of CFLAGS for the same. Naturally, this does mean
that some machines that previously could run DPDK now can't do so, but
hardware with SSE4.2 has been around for almost a decade now, so this
should not be a major problem.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
At some places, the log2() function is used despite this function
works on float. This introduces a dependency to the math lib but
most of the time it is not required because we want an integer log2.
Add a new helper to do this job and fix nfp driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Currently EAL allocates hugepages one by one not paying attention
from which NUMA node allocation was done.
Such behaviour leads to allocation failure if number of available
hugepages for application limited by cgroups or hugetlbfs and
memory requested not only from the first socket.
Example:
# 90 x 1GB hugepages availavle in a system
cgcreate -g hugetlb:/test
# Limit to 32GB of hugepages
cgset -r hugetlb.1GB.limit_in_bytes=34359738368 test
# Request 4GB from each of 2 sockets
cgexec -g hugetlb:test testpmd --socket-mem=4096,4096 ...
EAL: SIGBUS: Cannot mmap more hugepages of size 1024 MB
EAL: 32 not 90 hugepages of size 1024 MB allocated
EAL: Not enough memory available on socket 1!
Requested: 4096MB, available: 0MB
PANIC in rte_eal_init():
Cannot init memory
This happens beacause all allocated pages are
on socket 0.
Fix this issue by setting mempolicy MPOL_PREFERRED for each hugepage
to one of requested nodes using following schema:
1) Allocate essential hugepages:
1.1) Allocate as many hugepages from numa N to
only fit requested memory for this numa.
1.2) repeat 1.1 for all numa nodes.
2) Try to map all remaining free hugepages in a round-robin
fashion.
3) Sort pages and choose the most suitable.
In this case all essential memory will be allocated and all remaining
pages will be fairly distributed between all requested nodes.
New config option RTE_EAL_NUMA_AWARE_HUGEPAGES introduced and
enabled by default for linuxapp except armv7 and dpaa2.
Enabling of this option adds libnuma as a dependency for EAL.
Fixes: 77988fc08d ("mem: fix allocating all free hugepages")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The --exclude parameter must be passed before the input directory to
tar, otherwise it's silently ignored and the .doctrees directory is
installed by make install-doc.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Depending on the environment, make might echo the command being ran.
In mk/rte.sdkdoc.mk make is used to print the DPDK version to be
piped to doxygen. This causes the following to be written:
<div id="projectname">DPDK
 <span id="projectnumber">/usr/bin/make-f/build/dpdk-jYjqnr/
dpdk-16.11.2/mk/rte.sdkconfig.mkshowversion</span>
</div>
Use -s (--silent) to prevent echoing.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
DPAA2 devices now support cortex-a72. They no longer support a57.
Also fp and simd is no more required to be stated explicitly for
standard a72 core.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
There are two new warnings in GCC 7 that cause problems in the DPDK
compile.
1. GCC now warns if you have a switch fall-through without a suitable
comment indicating that it was intentional. The compiler supports a number
of levels of warning which are triggered depending on the type of message
used, with level 3 being the default. To accept a wider range of possible
fall-through messages, we adjust this down to level 2.
2. GCC also warns about an snprintf where there may be truncation and the
return value is not checked. Given that we often use snprintf in DPDK in
place of strncpy, and in many cases where truncation is not a problem, we
can just disable this particular warning.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Making AVX and AVX512 configurable is useful for performance and power
testing.
The similar kernel patch at https://patchwork.kernel.org/patch/9618883/.
AVX512 support like in rte_memcpy has been in DPDK since 16.04, but it's
still unproven in rich use cases in hardware. Therefore it's marked as
experimental for now, will enable it after enough field test and possible
optimization.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Reviewed-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
In case the output directory (O=) is undefined or a relative directory lets
turn it into an absolute path before passing it on. Otherwise the output
directory is created relative to the subdir, e.g. pktgen/app/build/... and
pktgen/lib/lua/src/build/...
Signed-off-by: Jan Blunck <jblunck@infradead.org>
When using the compiler to link applications, include EXTRA_CFLAGS. This
is needed, for example, when cross-compiling, to pass --sysroot.
GCC cross-compilers built with Yocto don't use the --with-sysroot option,
making it necessary to pass --sysroot command-line option.
Signed-off-by: John Jacques <john.jacques@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
This script generates cscope, gtags, and tags index files based on
EAL environment(architecture and OS(linux/bsd)).
Selection of the architecture and OS environment is based on dpdk
configuration target(T=).If EAL environment(T=) is not specified,
the script generates tag files based on available source code.
Usage: make tags|cscope|gtags|etags [T=config]
example usage:
make cscope
make tags T=x86_64-native-linuxapp-gcc
make gtags T=arm64-armv8a-linuxapp-gcc
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
Enable Arkville on supported configurations
Add overview documentation
Minimum driver support for valid compile
Arkville PMD is not supported on ARM or PowerPC at this time
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Signed-off-by: John Miller <john.miller@atomicrules.com>
From the discussion in [1], it was observed that application should
have a default pool already linked even in case of shared builds.
Ring is especially important because packet mbuf creation API refer to
ring_mp_mc as default handler.
Documentation for this is pending.
[1] http://dpdk.org/ml/archives/dev/2017-April/063819.html
Fixes: 9a8e9b57f5 ("mempool: move ring handler as a driver")
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
clang 4 gives "taking address of packed member may result in an
unaligned pointer value" warnings in a few locations [1].
Disabled "-Waddress-of-packed-member" warning for clang >= 4
[1] build errors:
.../lib/librte_eal/common/eal_common_memzone.c:275:25:
error: taking address of packed member 'mlock' of class or structure
'rte_mem_config' may result in an unaligned pointer value
[-Werror,-Waddress-of-packed-member]
rte_rwlock_write_lock(&mcfg->mlock);
^~~~~~~~~~~
.../lib/librte_ip_frag/rte_ipv4_reassembly.c:139:31:
error: taking address of packed member 'src_addr' of class or structure
'ipv4_hdr' may result in an unaligned pointer value
[-Werror,-Waddress-of-packed-member]
psd = (unaligned_uint64_t *)&ip_hdr->src_addr;
^~~~~~~~~~~~~~~~
.../lib/librte_vhost/vhost_user.c:1037:34:
error: taking address of packed member 'payload' of class or structure
'VhostUserMsg' may result in an unaligned pointer value
[-Werror,-Waddress-of-packed-member]
vhost_user_set_vring_num(dev, &msg.payload.state);
^~~~~~~~~~~~~~~~~
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Disable for gcc < 4.7 and icc <= 14.0
PMD uses some compiler builtins and new compiler options. Tested with
gcc 4.5.1 and following were not supported:
option:
-Ofast
macros:
_Static_assert
__ORDER_LITTLE_ENDIAN__
__ORDER_BIG_ENDIAN__
__BYTE_ORDER__
__atomic_fetch_add
__ATOMIC_ACQUIRE
__atomic_load_n
__ATOMIC_RELAXED
__atomic_store_n
__ATOMIC_RELEASE
It is not easy to fix all in PMD, disabling PMD for older compilers.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
I get the following error when linking the test application:
build/lib/librte_pmd_thunderx_nicvf.a(nicvf_hw.o):
In function `nicvf_qsize_regbit':
drivers/net/thunderx/base/nicvf_hw.c:451: undefined reference to `log2'
build/lib/librte_pmd_thunderx_nicvf.a(nicvf_hw.o):
In function `nicvf_rss_reta_update':
drivers/net/thunderx/base/nicvf_hw.c:804: undefined reference to `log2'
build/lib/librte_pmd_thunderx_nicvf.a(nicvf_hw.o):
In function `nicvf_rss_reta_query':
drivers/net/thunderx/base/nicvf_hw.c:825: undefined reference to `log2'
While I don't know why it does not happen for a default build, the error
can be explained. The link command line is:
gcc -o test ... *.o ... -Wl,-lm ... -Wl,-lrte_pmd_thunderx_nicvf ...
rte_pmd_thunderx_nicvf needs the math library, and it should be
added after. This is not the case because the test application also
adds the math library.
The makefile already filters the libraries, but it keeps the first
occurrence of the lib. Instead, the last one should be kept.
Fixes: edf4d331dc ("mk: eliminate duplicates from libraries list")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
On my system, the version of the compiler is not properly retrieved,
resulting in strange logs when building the dpdk:
/bin/sh: line 0: test: too many arguments
This happens when mk/toolchain/clang/rte.toolchain-compat.mk is included
from a directory that use gcc to build (ex: kernel modules). In that
case, the CLANG_VERSION variable contains spaces that breaks some shell
calls to the test program.
The error is because the output of "gcc -v" on my system contains 2 lines
that matches the "version" string:
Configured with: ../src/configure -v \
--with-pkgversion='Debian 6.3.0-6' [...]
gcc version 6.3.0 20170205 (Debian 6.3.0-6)
This may be specific to Debian. Fix it by specializing the grep.
Fixes: 2ef6eea891 ("mk: add clang toolchain")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The file examples.dox was not re-generated when a file
is added or removed from examples/.
It is now removed on clean operation.
The ordering of operations (clean before generation) is also
better defined.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
