Prints in ecore_get_dev_info showed only chip revision,
and did that as number instead of letter.
I.e., BB A0 --> BB0, BB B0 --> BB1, AH A0 --> AH0, AH A1 --> AH0.
Correct the printing scheme into
{AH, BB} {A, B}{0, 1}
Fixes: ec94dbc573 ("qede: add base driver")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix Timer(TM) block Internal Lookup Table(or ILT for logical to
physical address translation) initialization for SRIOV's coexistence
with other protocols.
Fixes: ec94dbc573 ("qede: add base driver")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Remove the forcing of the driver's default resource allocation.
Fixes: 77f7222124 ("net/qede: add PCI ids for new chip variant")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Set pointers to NULL after freeing the allocations. Change OSAL_FREE
macro to take care of this and cleanup relevant code.
Fixes: 26ae839d06 ("qede: add DCBX support")
Fixes: ec94dbc573 ("qede: add base driver")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
dcbx-update-flag is incorrectly converted to boolean before assigining
it to ramrod data, fix this typecasting. Also, added more debug
messages in the dcbx code paths.
Fixes: 26ae839d06 ("qede: add DCBX support")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Split control and datapath to make datapath substitutable and
possibly reusable with alternative control path.
libefx-based Tx datapath is bound to libefx control path, but
it should be possible to use other datapaths with alternative
control path(s).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If Rx refill threshold guarantees that refill happens for one or
more bulks, less checks may be done on refill.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Split control and datapath to make datapath substitutable and
possibly reusable with alternative control path.
libefx-based Rx datapath is bound to libefx control path, but
other datapaths should be possible to use with alternative
control path(s).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Rx queue flags should keep the information required on datapath.
It is a preparation to split control and data paths.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Use different sets of libefx EvQ callbacks for management,
transmit and receive event queue. It makes event handling
more robust against unexpected events.
Also it is required for alternative datapath support.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Adding support for the next items: eth, vlan, ipv4, udp, tcp and for the
next actions: queue, drop
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Make priv_lock/priv_unlock functions and some other structs/defines visible
from different source files by placing them into mlx4.h header.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
If LSC interrupts are enabled, the application expects the link_update
ops to be executed by the PMD itself.
No link status change event is received upon probing, therefore the link
status update must be forced.
Fixes: c4da6caa42 ("mlx4: handle link status interrupts")
Cc: stable@dpdk.org
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
SIMPLEQ_* operations are not available in FreeBSD. Replacing
with equivalent STAILQ_* operations.
Fixes: f2546f8e51 ("net/thunderx/base: add functions to store qsets")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
ConnectX-5 supports enhanced version of multi-packet send (MPS). An MPS Tx
descriptor can carry multiple packets either by including pointers of
packets or by inlining packets. Inlining packet data can be helpful to
better utilize PCIe bandwidth. In addition, Enhanced MPS supports hybrid
mode - mixing inlined packets and pointers in a descriptor. This feature is
enabled by default if supported by HW.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Some libefx-based drivers might need this functionality to
indicate DPCPU FW IDs as part of FW version info to assist
experienced users.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
When setting up the VSIs, MAC filter is used for
receiving MAC broadcast packets.
We should follow it to implement the broadcast
promiscuous mode setting.
Fixes: 61fff9b4c6 ("net/i40e: set VF broadcast mode from PF")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If the user reconfigures the queue size, then the previously allocated
memzone may potentially be too small. Release the memzone when a queue
is released and allocate a new one each time a queue is setup.
While here convert to rte_eth_dma_zone_reserve() which does basically
the same things as the private function.
Fixes: dfaff37fc4 ("vmxnet3: import new vmxnet3 poll mode driver implementation")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Acked-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shrikrishna Khare <skhare@vmware.com>
A tap netdevice does not support flow control; ensure nothing but
RTE_FC_NONE mode can be set.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
A tap netdevice actually receives every packet, without any filtering
whatsoever. There is no need for any multicast address registration
to receive multicast packets.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The MTU is assigned to the tap netdevice according to the argument, but
packet transmission and reception just write/read on an fd with the
default limit being the socket buffer size.
As a new rte_eth_dev_data is allocated during tap device init, ensure it
is set again dev->data->mtu.
Once the actual netdevice is created via tun_alloc(), make sure to apply
the desired MTU to the netdevice.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
As soon as the netdevice is created, update pmd->mac_addr with its
actual MAC address.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Create a socket for ioctl at tap device creation instead of opening it
and closing it every call to tap_link_set_flags().
Use a common tap_ioctl() function that can be extended for various uses
(such as MTU change, MAC address change, ...).
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is no reason not to support ARP on a tap netdevice. Remove
IFF_NOARP flags.
Focus on IFF_UP when a link status change is required.
Fixes: f457b472b1 ("net/tap: add link up and down operations")
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
The patch is to add support for MCDI proxy which comes in
useful, particularly, while running over VF: few commands
will normally fail with EPERM, but in some cases the host
driver (i.e. running over the corresponding PF, typically,
within a hypervisor) may set itself as a proxy to conduct
authorization for the commands coming from VFs; these are
forwarded to the corresponding access control application
which may decline or approve authorization by replying to
the requests; all in all, the guest driver has to process
the replies forwarded back by the firmware MC in order to
give up gracefully (by setting return code which could be
understood by 'libefx') or re-issue the original commands
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
If Rx mode is unacceptable, in particular, when promiscuous
or all-multicast filters are not allowed while running over
PCI function which is not a member of appropriate privilege
groups, the driver has to cope with the failures gracefully
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
If periodic DMA statistics feature is absent (particularly,
while running over VF), the PMD must provide an ability to
cope with it using explicit update requests which are kept
restrained according to 'stats_update_period_ms' parameter
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
The patch is to make MAC statistics update interval tunable
by means of 'stats_update_period_ms' kvarg parameter making
it possible to use values different from 1000 ms in case of
SFN8xxx boards provided that firmware version is 6.2.1.1033
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
In function ena_com_set_hash_ctrl(), the return value is assigned to
"ret" variable, but it is not returned. Fix it by adding the return.
Fixes: 99ecfbf845 ("ena: import communication layer")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Jan Medala <jan@semihalf.com>
It's not queue identifier but a descriptor identifier.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This commit adds a signal-based trigger to the Rx burst function in order
to avoid unnecessary system calls while Rx queues are empty.
Triggered Rx bursts put less pressure on the kernel, free up CPU resources
for applications and result in a noticeable performance improvement when
sharing CPU threads with other PMDs.
Measuring the traffic forwarding rate between two physical devices in
testpmd (IO mode, single thread, 64B packets) before and after adding two
tap PMD instances (4 ports total) that do not process any traffic and
comparing results yields:
Without Rx trigger:
-15% (--burst=32)
-62% (--burst=1)
With Rx trigger:
-0.3% (--burst=32)
-6% (--burst=1)
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
