CONFIG_* variables were used by make-based build system which is
removed.
Fixes: 3cc6ecfdfe ("build: remove makefiles")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add a function to calculate the length of an IPv4 header as suggested
on the mailing list [1]. Call where appropriate.
[1] https://mails.dpdk.org/archives/dev/2020-October/184471.html
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Michael Pfeiffer <michael.pfeiffer@tu-ilmenau.de>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add a check for the return value of the sscanf call in
parse_internal_args(), returning an error if we don't get the expected
result.
Coverity issue: 362049
Fixes: 96cb195211 ("net/ring: use EAL APIs in PMD specific API")
Cc: stable@dpdk.org
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
AF_XDP PMDs who wish to share a UMEM must have a unique context
(ctx) ie. netdev,qid tuple. For instance, the following will not
work since both PMDs' contexts are identical.
--vdev net_af_xdp0,iface=ens786f1,start_queue=0,shared_umem=1
--vdev net_af_xdp1,iface=ens786f1,start_queue=0,shared_umem=1
Supporting this scenario would require locks, which would impact
the performance of the more typical cases - xsks with different
netdev,qid tuples.
Fixes: 74b46340e2 ("net/af_xdp: support shared UMEM")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
During a hotplug attempt, failsafe will try to bring a subdevice that
just appeared to its internal state. On error, the subdevice is marked
for removal and will be cleaned up.
However failsafe_dev_remove() only remove active devices. Devices that
failed during probe will be stuck in DEV_PARSED state repeatedly.
Consider all devices when doing a removal round, but limit burst control
and stats saving to active devices.
Fixes: 598fb8aec6 ("net/failsafe: support device removal")
Cc: stable@dpdk.org
Signed-off-by: Gaetan Rivet <grive@u256.net>
This patch adds checking whether the related Tx or Rx queue has been
setup in the queue-related API functions to avoid illegal address
access.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch extract checking rx_queue_id or tx_queue_id into two separate
common functions named eth_dev_validate_rx_queue and
eth_dev_validate_tx_queue.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Following ethdev update in the previous patch of this series, this
patch adds CLI support to query information related to AGE action.
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Existing API supports AGE action to monitor the aging of a flow.
This patch implements RFC [1], introducing the response format for query
of an AGE action.
Application will be able to query the AGE action state.
The response will be returned in the format implemented here.
[1] https://mails.dpdk.org/archives/dev/2020-September/180061.html
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Current implementation for PF RSS config wrap function has some
potential bugs about GTPU, e.g., same input set for GTPU inner and
non-TUN have different hash values, which should be same. Thus, we
use extra pre and post processing to re-config GTPU rules.
Fixes: 185fe122f4 ("net/ice: fix GTPU down/uplink and extension conflict")
Cc: stable@dpdk.org
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Use sample action with ratio is 1 for mirroring flow, add
supports to set the different port or encap action for mirrored
packets.
The example of test-pmd command:
1. set sample_actions 1 port_id id 1 / end
flow create 0 ... pattern eth / end actions
sample ratio 1 index 1 / port_id id 2...
The flow will result in all the matched ingress packets will be sent to
port 2, and also mirrored the packets and sent to port 1.
2. set raw_encap 0 eth src.../ ipv4.../...
set raw_encap 1 eth src.../ ipv4.../...
set sample_actions 2 raw_encap index 0 / port_id id 0 / end
flow create 0 ... pattern eth / end actions
sample ratio 1 index 2 / raw_encap index 1 / port_id id 0...
The flow will result in all the matched egress packets will be
encapsulated and sent to wire, and also mirrored the packets and with
the different encapsulated data and sent to wire.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add a new testpmd command 'set sample_actions' that supports the
multiple sample actions list configuration by using the index:
set sample_actions <index> <actions list>
The examples for the sample flow use case and result as below:
1. set sample_actions 0 mark id 0x8 / queue index 2 / end
.. pattern eth / end actions sample ratio 2 index 0 / jump group 2 ...
This flow will result in all the matched ingress packets will be
jumped to next flow table, and the each second packet will be
marked and sent to queue 2 of the control application.
2. ...pattern eth / end actions sample ratio 2 / port_id id 2 ...
The flow will result in all the matched ingress packets will be
duplicated and sent to the representor peer (VF or wire) on DPDK port 2,
and the each second packet will also be sent to E-Switch manager vport.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
When using full offload, all traffic will be handled by the HW, and
forwarded to the requested VF or wire and the control application does
not see this traffic anymore. So there's a need for an action that
enables the control application some forwarded traffic visibility.
The solution introduces a new action that will sample the incoming
traffic and send a duplicated traffic with the specified ratio to the
application, while the original packet will continue to the target
destination.
The packets sampled equals is '1/ratio', the ratio value set to 1
means that the packets will be completely mirrored. The sample packet
can be assigned with different set of actions from the original packet.
In order to support the sample packet in rte_flow, new rte_flow action
definition RTE_FLOW_ACTION_TYPE_SAMPLE and structure rte_flow_action_sample
will be introduced.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
If the infinite Rx argument ('infinite_rx') is provided a ring is
allocated and filled in the '.rx_queue_setup' dev_ops.
Later this ring freed in the '.dev_close' dev_ops.
If the 'infinite_rx' provided and '.dev_close' called before
'.rx_queue_setup', the ring will be NULL and trying to empty/free it
will cause a crash.
This is fixed by adding ring NULL check before trying to empty/free it.
Bugzilla ID: 548
Fixes: a3f5252e5c ("net/pcap: enable infinitely Rx a pcap file")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Abstract socket address has no connection with
filesystem pathnames and the socket disappears
once all open references are closed.
Memif pmd will use abstract socket address by default.
For backwards compatibility use new argument
'socket-abstract=no'
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
The glibc free allows free(NULL) as null operation,
so remove this useless null checks.
Coverity issue: 357719
Fixes: da138cd47e ("net/octeontx2: handle port reconfigure")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Added support in the ULP mapper to enable parent child flow
creation and destroy. This feature enables support for the vxlan
decap functionality.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
FDB type is now driven by the caller, not the template.
So remove it.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Name changes due to consolidating the template table processing
and hence are not necessary.
- chip before type in name
- removal of class in key field info
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Added support for parent child flow database apis. This
feature adds support to enable vxlan decap support where
flows needs to maintain parent-child flow relationship.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to select internal Exact Match vs
External Exact Match support while loading the PMD.
- Added new mem type conditional opcode for internal/external
- Adapted the flowdb resource counts based on selected mode
- Template changes to use the new opcode
- The decision for internal/external EM support is based on the
devargs parameter max_num_kflows. If this is set, external EM
is used.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently, we are only registering to this event if the function
is a trusted VF. This patch extends it for PFs as well.
Fixes: 322bd6e702 ("net/bnxt: add port representor infrastructure")
Cc: stable@dpdk.org
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The default and regular flows are stored in the same flow table
instead of different flow tables. This should help code reuse
and reducing the number of allocations.
So combine default and regular flows in flow database.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The table processing has been consolidated to be able to reuse the same
code for action and classification template processing.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Implement HWRM_FUNC_VF_RESOURCE_CFG command and use it to
reserve resources for VFs when NEW RM is enabled.
2. Invoke PF’s FUNC_CFG before configuring VFs resources.
3. Don’t consider max_rx_em_flows in max_l2_ctx calculation
when VFs are configured.
4. Issue HWRM_FUNC_QCFG instead of HWRM_FUNC_QCAPS to find
out the actual allocated resources for VF.
5. Don’t add random mac to the VF.
6. Handle completion type CMPL_BASE_TYPE_HWRM_FWD_REQ instead
of CMPL_BASE_TYPE_HWRM_FWD_RESP.
7. Don't enable HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE
when the list of HWRM commands that needs to be forwarded
to the PF is specified in HWRM_FUNC_DRV_RGTR.
8. Update the HWRM commands list that can be forwarded to the
PF.
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In order to support multiple devices this patch:
- Breaks the template into device specific files
- Changes template list retrieval to use device id
- Determines the software device id using the bp pointer
- Determines the TRUFLOW resources based on device id
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
The session details that is shared among multiple ports
need to be outside the bnxt structure.
Fixes: 70e64b27af ("net/bnxt: support ULP session manager cleanup")
Cc: stable@dpdk.org
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The fast mbuf free offload for non-vector mode requires
additional checks in order to handle long tx buffer
descriptors, so dedicated functions are needed for
vector- and non-vector-modes.
Fixes: 369f6077c5 ("net/bnxt: support fast mbuf free")
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
PRM expose fields "Icmp_header_data" in IPv4 ICMP.
Update ICMP mask parameter with ICMP identifier and sequence number
fields.
ICMP sequence number spec with mask, Icmp_header_data low 16 bits are
set.
ICMP identifier spec with mask, Icmp_header_data high 16 bits are set.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
While creating flow with action type RSS, action type is not being
set to RSS, and action type is being set to unicast. Therefore it breaks
RSS functionality. This patch add changes to program the RSS action
properly.
Fixes: 4092e4845d ("net/octeontx2: add flow operations")
Cc: stable@dpdk.org
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
As described in doc/guides/prog_guide/poll_mode_drv.rst,
the naming scheme for the xstats is parts separated with underscore:
* direction
* detail 1
* detail 2
* detail n
* unit
where detail 1 can be "q" followed with a queue number.
It means the name of the stats per queue should be rx_qN_* or tx_qN_*.
The second underscore was missing so far.
Fixing the basic xstat names may be considered an API change,
that's why it should not be backported.
While fixing this mistake, some examples of the naming scheme
are given as part of the API documentation of rte_eth_xstat_name.
More proposals about standardizing statistics:
http://fast.dpdk.org/events/slides/DPDK-2019-09-Ethernet_Statistics.pdf
Fixes: bd6aa172cf ("ethdev: fetch extended statistics with integer ids")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ciara Power <ciara.power@intel.com>
strncpy may leave the destination buffer not NULL terminated so use
strlcpy instead.
Coverity issue: 362975
Fixes: 339b88c6a9 ("net/af_xdp: support multi-queue")
Cc: stable@dpdk.org
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
load-acquire memory order has a barrier. Loading it inside
the loop will result in a barrier in every iteration. Hence,
load the variable once outside the loop.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Jakub Grajciar <jgrajcia@cisco.com>
For zero-copy S2M rings, ring->head is updated by the sender and
eth_memif_tx_zc function is called in the context of sending thread.
The loads in the sender do not need to synchronize with its own stores.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Jakub Grajciar <jgrajcia@cisco.com>
eth_memif_tx_zc function is called only for S2M rings. Remove
additional code for M2S rings in this function.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Jakub Grajciar <jgrajcia@cisco.com>
For zero-copy M2S rings, ring->head is updated by the receiver
and eth_memif_rx_zc function is called in the context of
receiving thread. The loads in the receiver do not need to
synchronize with its own stores.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Jakub Grajciar <jgrajcia@cisco.com>
For S2M rings, ring->head is updated by the sender and eth_memif_tx
function is called in the context of sending thread. The loads in
the sender do not need to synchronize with its own stores.
Fixes: a2aafb9aa6 ("net/memif: optimize with one-way barrier")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Jakub Grajciar <jgrajcia@cisco.com>
For M2S rings, ring->head is updated by the receiver and eth_memif_rx
function is called in the context of receiving thread. The loads in
the receiver do not need to synchronize with its own stores.
Fixes: a2aafb9aa6 ("net/memif: optimize with one-way barrier")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Jakub Grajciar <jgrajcia@cisco.com>
For M2S rings, ring->tail is updated by the sender and eth_memif_tx
function is called in the context of sending thread. The loads in
the sender do not need to synchronize with its own stores.
Fixes: a2aafb9aa6 ("net/memif: optimize with one-way barrier")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Jakub Grajciar <jgrajcia@cisco.com>
In the case of S2M queues, the receiver synchronizes with the sender
(i.e. informs of the packets it has received) using ring->tail.
Hence, the sender does not need to update last_tail.
In the case of M2S queues, the receiver uses last_tail to
keep track of the descriptors it has received. The
sender is not required to update the last_tail. Updating
the last_tail makes it a shared variable between the
transmitter and receiver affecting the performance.
Fixes: 09c7e63a71 ("net/memif: introduce memory interface PMD")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Jakub Grajciar <jgrajcia@cisco.com>
When input only Rx interface argument 'rx_iface_in' provided, current
code assigns 'eth_null_rx' burst function by mistake and no packet
received as a result.
Like in following usage no packets received from physical interface:
"--vdev net_pcap0,rx_iface_in=eth0,tx_iface=eth0"
Fixing the burst function assignment when 'rx_iface_in' argument is used
Fixes: f14a945915 ("net/pcap: remove Rx queue argument necessity")
Cc: stable@dpdk.org
Reported-by: Muthurajan Jayakumar <muthurajan.jayakumar@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
In 'bond_ethdev_rx_burst_alb()' in Rx path, 'bond_rx_queue' should be
used, not 'bond_tx_queue'.
Fixes: 06fe78b98c ("bond: add mode 6")
Cc: stable@dpdk.org
Signed-off-by: Dongsheng Rong <rongdongsheng@baidu.com>
Signed-off-by: RongQing Li <lirongqing@baidu.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Current Rx round robin policy for the slaves has two issue:
1. active_slave in bond_dev_private is shared by multiple PMDS which
maybe cause some slave Rx hungry, for example, there is two PMD and
two slave port, both PMDs start to receive, and see that active_slave
is 0, and receive from slave 0, after complete, they increase
active_slave by one, totally active_slave are increased by two, next
time, they will start to receive from slave 0 again, at last, slave 1
maybe drop packets during to not be polled by PMD
2. active_slave is shared and written by multiple PMD in RX path for
every time RX, this is a kind of cache false share, low performance.
So move active_slave from bond_dev_private to bond_rx_queue make it as
per queue variable
Fixes: ae2a04864a ("net/bonding: reduce slave starvation on Rx poll")
Cc: stable@dpdk.org
Signed-off-by: RongQing Li <lirongqing@baidu.com>
Signed-off-by: Dongsheng Rong <rongdongsheng@baidu.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This is a cleanup commit.
It assembles all tunnel outer updates into one function call to avoid
code duplications.
It defines RTE_VXLAN_GPE_DEFAULT_PORT (4790) in accordance with all
other tunnel protocol definitions.
It replaces all numeric values 4789 in their corresponding definition
RTE_VXLAN_GPE_DEFAULT_PORT.
It updates the 'csum parse-tunnel' documentation.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
IANA has assigned port 6081 as the fixed well-known destination port for
GENEVE. Nevertheless draft-ietf-nvo3-geneve-09 recommends that
implementations make this configurable. This commit enables specifying
any positive UDP destination port number for GENEVE protocol parsing.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
GENEVE is a widely used tunneling protocol in modern Virtualized
Networks. testpmd already supports parsing of several tunneling
protocols including VXLAN, VXLAN-GPE, GRE. This commit adds GENEVE
parsing of inner protocols (IPv4-0x0800, IPv6-0x86dd, Ethernet-0x6558)
based on IETF draft-ietf-nvo3-geneve-09. GENEVE is considered more
flexible than the other protocols. In terms of protocol format GENEVE
header has a variable length options as opposed to other tunneling
protocols which have a fixed header size.
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Called rte_eth_dev_info_get() in testpmd, to get device info
so that speed capabilities can be printed under "show device info"
Bugzilla ID: 496
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
