The register read/write mphy functions have misleading whitespace around
the `locked` check. This cleanup merely preserves the existing functionality
and suppresses future gcc versions' "misleading indentation" warning.
Suggested-by: Panu Matilainen <pmatilai@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
On the 82575 chipset, there is a pool of global TX contexts instead of 2
per queues on 82576. See Table A-1 "Changes in Programming Interface
Relative to 82575" of Intel® 82576EB GbE Controller datasheet (*).
In the driver, the contexts are attributed to a TX queue: 0-1 for txq0,
2-3 for txq1, and so on.
In igbe_set_xmit_ctx(), the variable ctx_curr contains the index of the
per-queue context (0 or 1), and ctx_idx contains the index to be given
to the hardware (0 to 7). The size of txq->ctx_cache[] is 2, and must
be indexed with ctx_curr to avoid an out-of-bound access.
Also, the index returned by what_advctx_update() is the per-queue
index (0 or 1), so we need to add txq->ctx_start before sending it
to the hardware.
(*) The datasheets says 16 global contexts, however the IDX fields in TX
descriptors are 3 bits, which gives a total of 8 contexts. The
driver assumes there are 8 contexts on 82575: 2 per queues, 4 txqs.
Fixes: 4c8db5f09a24 ("igb: enable TSO support")
Fixes: af75078fece3 ("first public release")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In the function set_rx_mode, the pointer of device data points
to the wrong address as found in ixgbe code, and fixed in commit:
"ixgbe: fix PF promiscuous mode after VF closed"
Fixes: be2d648a2dd3 ("igb: add PF support")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add a new API rte_eth_dev_get_supported_ptypes to query what packet types
can be filled by a given device. The device should be already started or
its PMD RX burst function already decided, since the packet types supported
may vary depending on RX function.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Comment for "ierrors" counter says that it counts erroneous received
packets. But for some reason "imissed" counter is added to "ierrors"
counter in most drivers.
It is a mistake, because missed packets are obviously not received.
This patch fixes it.
Fixes: 70bdb18657da ("ethdev: add Rx error counters for missed, badcrc and badlen packets")
Fixes: 6bfe648406b5 ("i40e: add Rx error statistics")
Fixes: 856505d303f4 ("cxgbe: add port statistics")
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This brings the DPDK igb driver inline with the behavior used by
the current Linux driver. The IGB hardware has several different
MAC types and the threshold values that work vary based on the hardware.
Since DPDK 1.8 it has been up to devices to provide the correct default
configuration parameter. But the igb driver gives values that are broken
on some devices, and always causes a warning message at startup.
Please test this on real hardware, I don't have the luxury of a
hardware lab full of variations of this chip.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Allow reprogramming of the RAR with a zero mac address,
to ensure that the VF traffic goes to the PF after
stop, close and detach of the VF.
Fixes: be2d648a2dd3 ("igb: add PF support")
Fixes: d82170d27918 ("igb: add VF support")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Enable promiscuous and allmulticast mode control from the VF using
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() and
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable().
For promiscuous mode host/PF igb driver should be built with
IGB_ENABLE_VF_PROMISC.
For allmulticast mode "allmulti" flag should be set for appropriate PF
ifconfig eth0 allmulti
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Modified driver and eal code to support I217 and I218 Intel NICs.
Compiled and tested (via testpmd) on Ubuntu 14.04 for target
x86_64-native-linuxapp-gcc
Compiled for target x86_64-native-linuxapp-clang
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In order to set ether type of VLAN for single VLAN, inner
and outer VLAN, the VLAN type as an input parameter is added
to 'rte_eth_dev_set_vlan_ether_type()'.
In addition, corresponding changes in e1000, ixgbe and i40e
are also added.
It is an ABI break but ethdev library is already bumped for 16.04.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Macros RTE_MBUF_DATA_DMA_ADDR and RTE_MBUF_DATA_DMA_ADDR_DEFAULT
are defined in each PMD driver file. Convert macros to inline
functions and move them to common lib/librte_mbuf/rte_mbuf.h file.
PMD drivers include rte_mbuf.h file directly/indirectly hence no
additioanl header file inclusion is necessary.
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
fix the error reported by checkpatch:
"ERROR: return is not a function, parentheses are not required"
remove parentheses in return like:
"return (logical expressions)"
remove parentheses in return a function like:
"return (rte_mempool_lookup(...))"
Fixes: 6307b909b8e0 ("lib: remove extra parenthesis after return")
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
There is a compilation issue with some compilers.
In i686 platform, long is 32bit, so XXX_CYCLECOUNTER_MASK
need define as 'ULL'
Fixes: 9c857bf6be87 ("igb: support ieee1588 functions for device time")
Fixes: 1c4445e1f28e ("ixgbe: support ieee1588 functions for device time")
Fixes: f3a4e40eca0c ("i40e: support ieee1588 functions for device time")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
If use DPDK PF + DPDK VF on igb NICs, we find the MAC address of VF
port is always 0. Because we forget to give it a value if this MAC
address is not assigned by PF. This patch'll assign a random MAC
address to igb VF port as ixgbe does.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The vector number may change during 'dev_start'.
Before enabling a new vector mapping,
it's necessary to disable/unmap the previous setting.
Fixes: fe685de2b1b6 ("igb: fix VF start with PF stopped")
Reported-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch removes the crc bytes from byte counter statistics.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This fixes a bug added to em and igb drivers which causes the pci info
seen by the primary process to become invalidated by secondary process
startup.
This call was added after the process type check in the other drivers.
Fixes: eeefe73f0af1 ("drivers: copy PCI device info to ethdev data")
Signed-off-by: Jon DeVree <nuxi@vault24.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add additional functions to support the existing IEEE1588
functionality and to enable getting, setting and adjusting
the device time.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
Use common code to handle Xen support at runtime.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Once posted through mailbox, we must check for nack from the PF
and report an error in this case.
Signed-off-by: Julien Meunier <julien.meunier@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When igb runs as a PF, mbox interrupt is prerequisite to make VF
start normally.
And PF sometimes won't 'dev_start', so the mbox interrupt register
during 'dev_init' is required.
The patch rolls back the interrupt register for mbox,lsc to the 'dev_init'.
As UIO doesn't support multiple vector, mbox has to occupy the only one.
It adds condition check on 'dev_start', rxq interrupt is not allowed
when PF running in IOV mode via UIO.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
According to the VFIO interrupt mapping, the interrupt vector id
for rxq starts from RX_VEC_START.
It doesn't impact the UIO cases.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Use new function rte_eth_copy_pci_info.
Copy device info for the following pdevs:
bnx2x
cxgbe
e1000
enic
fm10k
i40e
ixgbe
mlx4
mlx5
virtio
vmxnet3
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add xstats_get() and xstats_reset() functions to igb
driver, and the necessary strings to expose these
NIC statistics.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Different NIC has its specific constraint on the multi-queue
configuration, so move the checking from ethdev lib to drivers.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
When datapath rxq interrupt is enabled, enable related device rxq.
Remove the interrupt handler after device stopped.
e1000 only support one type of interrupt cause, so remove lsc interrupt
handler if rxq enabled.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Enable rx interrupt support on e1000 physical and emulated device.
Implement rxq interrupt related functions in eth_dev_ops structure.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Separate lsc and rxq interrupt for they have different interrupt handlers.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Only mask lsc interrupt bit when setup device interrupt.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
This patch marks rxq with RTE_SET_USED in
rx_desc_hlen_type_rss_to_pkt_flags(), when
ieee1588 is disabled. Previously a compilation
error occurred on unused-parameter.
Fixes: 1ce6591e238a ("igb: fix ieee1588 frame identification in i210")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fix a misinterpreatation of VF statistic macro in e1000/igb.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Roger Melton <rmelton@cisco.com>
Fixed issue where the flag PKT_RX_IEEE1588_PTP was not being set
in Intel I210 NIC, as EtherType in RX descriptor is in bits 8:10 of
Packet Type and not in the default bits 0:2.
Fixes known issue "IEEE1588 support possibly not working
with an Intel Ethernet Controller I210 NIC"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch enables igb TSO feature, the feature works on both PF and VF.
The TCP segmentation offload needs to write the offload related information
into the advanced context descriptors, which is similar to checksum offload.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch fixes a bug in reading the 64 bit register reading
which was causing the total octets counters to show zero.
Now the code reads both the lower and higher 32 bits.
Tested in testpmd, byte values are correct.
Fixes: 805803445a02 ("e1000: support EM devices (also known as e1000/e1000e)")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
On power up, the MAC - PHY interface needs to be set to PCIe, even if
cable is disconnected. In ME systems, the ME handles this on exit from
Sx(Sticky mode) state. In non-ME, the driver handles it. Added a check
for non-ME system to the driver code that handles that.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Previously, in check_reset_block RSPCIPHY was polled for 100 ms before determining
that the ME veto is set. This needed to be increased to 300 ms.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Enabling ulp on link down when cable is connect caused an infinite
loop of linkup/down indications in the NDIS driver.
After discussed, correct flow is to enable ULP only when cable is
disconnected.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Requires driver changes!
Change e1000_set_eee_i350 and e1000_set_eee_i354 to have flags allowing
changes in the advertised EEE speeds.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
There are some images which contain ETrackID in inverted format. This patch
allows reading this format.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
EEARBC has changed on i210. It means EEARBC has a different address on
i210 than on other NICs. So, add a new entity named EEARBC_I210 to the
register list and make sure the right one is being used on i210.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
