For consistency with the size of Tx descriptors, the size of Rx
descriptors should be a part of NIC config, not a macro that is
common for all NIC families.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Size of Tx descriptor is different on Riverhead. So, the size
should be a part of NIC config, not a macro that is common for
all NIC families.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The change is needed for the functions that accept const efx_nic_t
pointer and have to get efx_nic_cfg_t.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The define EFX_TXQ_MAX_BUFS is used only by EF10 family implementation.
Since the macro is not used by any drivers, it does not require
exposed libefx interface.
Make the define EF10-specific.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The macro EFX_RXQ_DC_NDESCS() is used only by Siena implementation.
Since the macro is not used by any drivers, it does not require
exposed libefx interface.
Make the macro Siena-specific.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Now we have min/max limits in NIC config, so we can do check against
min/max in a generic place instead of NIC family specific functions.
Check that the descriptors number is a power of 2 is also can be
made common. It removes code duplication and makes NIC family
specific functions a bit shorter.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Now we have min/max limits in NIC config, so we can do check against
min/max in a generic place instead of NIC family specific functions.
Check that the descriptors number is a power of 2 is also can be
made common. It removes code duplication and makes NIC family
specific functions a bit shorter.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Now we have min/max limits in NIC config, so we can do check against
min/max in a generic place instead of NIC family specific functions.
Check that the descriptors number is a power of 2 is also can be made
common. It removes code duplication and makes NIC family
specific functions a bit shorter.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Descriptor limits are not common for all NIC families. Use the variables
from NIC configuration instead of deprecated defines.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Descriptor limits are not common for all NIC families. Use the variables
from NIC configuration instead of deprecated defines.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Min limit is not common for all NIC families. Use the variable from
NIC configuration instead of deprecated define.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
EF100/Riverhead has different min/max limits. So, these limits should
be a part of NIC config, not defines common for all NIC families.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
EF100/Riverhead has different min/max limits. So, these limits should
be a part of NIC config, not defines common for all NIC families.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
For consistency with defines of min descriptor number, define max
descriptor number for Huntington, Medford and Medford2.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
EF100/Riverhead has different min limit. So, this limit should
be a part of NIC config, not define common for all NIC families.
Define maximum Tx descriptor number for Siena in the same way as
minimum for consistency.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
FreeBSD driver needs a patch to provide a means for packets
which do not need checksum offload but have flow ID set
to avoid hitting only the first Tx queue (which has been used
for packets not needing checksum offload).
This should be possible on Huntington, Medford or Medford2 chips
since these support toggling checksum offload on any given queue
dynamically by means of pushing option descriptors.
The patch for FreeBSD driver will then need a means to figure out
whether the feature can be used, and testing adapter family might
not be a good solution.
This patch adds a feature bit specifically to indicate support
for checksum option descriptors. The new feature bits may have
more users in future, apart from the mentioned FreeBSD patch.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If an event handler requested an abort, only the inner loop was
guaranteed to be broken out of - the outer loop could continue
if total == batch.
Fix this by poisoning batch to ensure it is different to total.
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Revise the external port calculation to support all
X2 port modes. The previous algorithm could not
handle different port numbering schemes on each cage.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Correct annotations where NULL input can be permitted
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS get requests are supported in secondary process.
Prepare to make sfc_adapter primary process private data.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Logging should be supported in secondary process and now we have
everything required to share at least main logging macro.
sfc_adapter is going to become primary process only.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
sfc_adapter structure will become primary process only private data.
Start to factor out shared data into dedicated structure which will
become separate structure finally.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
libefx is not multi-process aware and all related structures
should be moved to primary process only.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
libefx is not multi-process aware and all related structures
should be moved to primary process only.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS RETA query and hash configuration get functions use shared
adapter data only. No libefx functions are called.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If Tx datapath supports multi-process, secondary process should be
able to use Tx descriptor status API.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If datapath supports multi-process, it should be possible to get
its TxQ structure by the queue index.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Secondary process needs to know TxQ state.
TxQ control structure will become primary process private.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If Rx datapath supports multi-process, secondary process should be
able to use Rx descriptor status and related API.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If datapath supports multi-process, it should be possible to get
its RxQ structure by the queue index.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Secondary process needs to know RxQ state.
RxQ control structure will become primary process private.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The change is required to support datapath-dependent device operations
for secondary process. It is just a step in the direction.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Rx and Tx datapath ops should be stored in process private
data since these structures are located in the data section
(not allocated from shared memory).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
These wrappers are used in single place and just complicate reading
and understanding if these ops could be supported in secondary process.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
TxQ control structure contains primary process only data and will become
primary process only. TxQ info get is supported in secondary process.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
RxQ control structure contains primary process only data and will
become primary process only. RxQ info get is supported in secondary
process.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Dynamic log type value may differ in different processes.
Fixes: f28ede500c ("net/sfc: support multi-process")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Rx queue count may be used from data core and it should not
generate control path logs.
Fixes: 04aa6b9c5f ("net/sfc: get RxQ pending descriptors count")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
test_create_bonded_device is failing due to improper initialisation in
bonded device configuration. Which leads to crash while setting up
queues.
The value of nb_rx_desc is checked if it is not in range of rx_desc_lim
of bonded device which fails.
This is due to "rx_desc_lim" is set to 0 as default value of bonded
device during bond_alloc().
Hence nb_rx_desc (1024) is > 0 and test fails.
Fix is to set the default values of rx_desc_lim of bonded device to
appropriate value.
Receive the values from slaves configuration like done for other
existing slave configuration
Fixes: 2efb58cbab ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
Acked-by: Chas Williams <chas3@att.com>
Added <rte_cycles.h> inclusion, was not included on some
building setups (armv8).
Fixes: 71ab2d6472 ("net/mlx5: fix VXLAN port registration race condition")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When operation calls for auth (digest generation), followed by
encryption of both data plus digest, the digest-in-buffer
flag must be set for QAT.
Fixes: 39e0bee48e ("crypto/qat: rework request builder for performance")
Cc: stable@dpdk.org
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
The rte_errno shouldn't have assigned negative error codes, so it has
to be fixed.
Fixes: b3fc5a1ae1 ("net/ena: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
The check for proc type in eth_ena_dev_init() should appear before
modyfing adapter structure.
Calling memset on ena_adapter from secondary process context, was
erasing all structure information, and it was causing the crash of the
main process.
Fixes: 1173fca25a ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
The number of queues was limited by number of lcores in the recent ENAv2
patch. However, some apps like symmetric_mp, are configuring multiple
queues although there is only single lcore used.
To prevent failure in that case, the lcore number constraint was
removed.
Fixes: ea93d37eb4 ("net/ena: add HW queues depth setup")
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
There is an intention to support VXLAN tunnel match without
hardware offloaded decapsulation, just to redirect ingress
tunnelled frame untouched. This small fix allows to specify
Flows with VXLAN VNI pattern and with or without following
decapsulation action.
Fixes: 251e8d02cf ("net/mlx5: add VXLAN to flow translate routine")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Log port ID as 16-bit unsigned integer.
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
1. Fix the lldp stop condition check - for firmware
versions 6.01(for X710)/3.33(for X722) or later we need stop the lldp
2. deferred stats reset in dev_init to avoid some noise be counted.
3. Document known issue for tx bytes decreasing due to link status change
Fixes: 044846f071 ("net/i40e: stop LLDP before setting local LLDP MIB")
Cc: stable@dpdk.org
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
E-Switch VXLAN tunneling rules require virtual VXLAN network
devices be created. These devices are managed by MLX5 PMD and
created/deleted dynamically.
Kernel creates the VXLAN devices and registers VXLAN UDP ports
to be hardware offloaded within the NIC kernel drivers. The
registration process is being performed into context of working
kernel thread and the race conditions might happen.
The VXLAN device is created and success code is returned to calling
application, but the UDP port registration process is not completed
yet and the next applied rule might be rejected by the driver with
ENOSUP code. This patch adds some timeout for new created devices,
allowing port registration process to be completed. The waiting
is performed once after device been created and first rule is being
applied.
Fixes: 95a464cecc ("net/mlx5: add E-switch VXLAN tunnel devices management")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When tc rule is created via Netlink message application
can provide the unique rule value which can be accepted
by the kernel. Than rule is managed with this assigned
handle. It was found that kernel can reject the proposed
handle and assign its own handle value, the rule control
is lost, because application uses its initially prorosed
rule handle and knows nothing about handle been repleced.
The kernel can assign handle automatically, the application
can get the assigned handle value by specifying NLM_F_ECHO
flag in Netlink message when rule is being created. The
kernel sends back the full descriptor of rule and handle
can be retrieved from and stored by application for further
rule management.
Fixes: 57123c00c1 ("net/mlx5: add Linux TC flower driver for E-Switch flow")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch modifies function mlx5_flow_validate_action_rss(), to
prevent the setting of rule with rss action, but without specifying
any queues.
For example:
flow create 0 ingress pattern end actions rss queues end / end
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
During port start, function mlx5_ctrl_flow_vlan() is called to create
default ingress flow rules.
For specific use-cases, a port can be used for Tx only.
In such case, number of Rx queues can be set to 0 to save resources,
hence the default ingress rules are irrelevant.
This patch modifies function mlx5_ctrl_flow_vlan() to avoid the
creation of the default ingress rules when number of Rx queues is 0.
It also includes update of validation functions for relevant actions,
mlx5_flow_validate_action_queue() and mlx5_flow_validate_action_rss(),
to prevent creation of flow rules with these actions when number of Rx
queues is 0.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When updating used ring, the id in used element should be the
index of the first desc in the desc chain.
Fixes: f9b9d1a557 ("net/virtio-user: add multiple queues in device emulation")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Always use the virtio variants which support the platform
memory ordering.
Fixes: 9230ab8d79 ("net/virtio: support platform memory ordering")
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixed below issues in the packed ring based control
vq support in virtio user:
1. The idx_hdr should be used_idx instead of the id in the desc;
2. We just need to write out a single used descriptor for each
descriptor list;
3. The avail/used bits should be initialized to 0;
Meanwhile, make the function name consistent with other parts.
Fixes: 48a4464029 ("net/virtio-user: support control VQ for packed")
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch mainly fixed below issues in the packed ring based
control vq support in virtio driver:
1. When parsing the used descriptors, we have to track the
number of descs that we need to skip;
2. vq->vq_free_cnt was decreased twice for a same desc;
Meanwhile, make the function name consistent with other parts.
Fixes: ec194c2f18 ("net/virtio: support packed queue in send command")
Fixes: a4270ea4ff ("net/virtio: check head desc with correct wrap counter")
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Fixes: 6bc985e411 ("net/sfc: support TSO in EF10 Tx datapath")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Fix the issue that the link speed is unknown.
Fixes: 690175ee51 ("net/ice: support getting device information")
Fixes: cf911d90e3 ("net/ice: support link update")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enable the APIs for unicast and multicast promiscuous
mode setting.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The original commit enabled the creation of flow rule with empty
ETH address and with specific VLAN.
It works fine on PF, but such flow rule is still rejected on VF due
to kernel limitation, which blocks MAC address of all zeroes.
This patch complements the original commit.
It sets byte 0 of MAC address to 0xFF.
Fixes: c0d2392631 ("net/mlx4: support flow w/o ETH spec and with VLAN")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
DCB is not necessary to be configured if no user priority of
queue region is requested.
Unexpected configuration of DCB will cause unexpected behavior, like
FDIR does not work on those queues, but could cause more issues.
Fixes: 7cbecc2f74 ("net/i40e: support queue region set and flush")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch fixes the inflexible compile issue AESNI-MB PMD.
Originally the compile of the PMD will fail if IPSec_MB is
not installed in default location.
Fixes: c68d7aa354 ("crypto/aesni_mb: use architecture independent macros")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Incorrect placement of prefetch in Tx path is causing
a performance drop of around ~2% on AMD platform.
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Allocating replacement buffer per received packet is expensive.
Instead, process received packets first and allocate
replacement buffers in bulk later.
This improves performance by ~25% in terms of PPS on AMD
platforms.
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
When ifpga_rawdev_create() allocate memory for a new rawdev,
the original code allocate redundant memory for adapter,
which is a member of the rawdev. What is actually necessary is
the adapter to be initialized, not memory allocated.
Fixes: ef1e8ede3d ("raw/ifpga: add Intel FPGA bus rawdev driver")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
In the original code, when an AFU device probe a driver,
if the first driver in the driver list does not support
this device or some error happens, bus probe returns an error.
With this patch, a device will try to match driver in the driver
list one by one until an appropriate driver is found.
If some error happens, the error is returned. If the current driver
does not support the device, just try the next driver in the list.
If all the drivers in the list are tried and no driver matches,
0 is returned. Otherwise, the error code is returned.
Fixes: 05fa3d4a65 ("bus/ifpga: add Intel FPGA bus library")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Original driver requires users to input "afu_bts" args.
But driver can also work without an explicit "afu_bts" args.
Fixes: 05fa3d4a65 ("bus/ifpga: add Intel FPGA bus library")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
This patch removes an unnecessary flag which was breaking the
build with older versions of the ISA-L library (v2.23 and older)
and replace with a more appropriate flag which is present
in older versions of library.
Fixes: bd03d3f1e4 ("compress/isal: enable checksum support")
Signed-off-by: Lee Daly <lee.daly@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Errors, missed and pauses should not be included in delivered
good Rx packets reported by ipackets.
Fixes: 1caab2f1e6 ("net/sfc: add basic statistics")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Free flow profile entries when free HW tables.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add the module that implemented flow abstraction that base on
flexible pipeline.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The flexible pipeline module provide the infrastructure for ice's
flexible packet processing feature.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Added API ice_alloc_hw_res and ice_free_hw_res.
Added resource type macro.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Remove some unnecessary code.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Rx and Tx datapath references were mixed up in a couple
of log statements and commentary blocks in the original
commit. Correct datapath name references in said places.
Fixes: f28ede500c ("net/sfc: support multi-process")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
VADAPTER_RX_OVERFLOW means Rx statistics overflow, not a missed
packet because of overflow.
VADAPTER_RX_BAD_PACKETS accumulates a number of error conditions,
but mainly impossibility to deliver because of no descriptors
available, so it is better to classify it as imissed.
Fixes: 1caab2f1e6 ("net/sfc: add basic statistics")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
In rdma-core library IBV_WQ_FLAG_RX_END_PADDING is renamed to
IBV_WQ_FLAGS_PCI_WRITE_END_PADDING. Way to query the capability is also
changed.
Fixes: 43e9d9794c ("net/mlx5: support upstream rdma-core")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Reviewed-by: Erez Ferber <erezf@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Rx packet padding is supposed to be set by an environment variable -
MLX5_PMD_ENABLE_PADDING, but it has been missing for some time by mistake.
Rather than using such a variable, a PMD parameter (rxq_pkt_pad_en) is
added instead.
Fixes: a1366b1a2b ("net/mlx5: add reference counter on DPDK Rx queues")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Reviewed-by: Erez Ferber <erezf@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Before this patch, VF must request a specific queues(1/2/4/8/16) with
DPDK PF. This patch align the number of requested queues to next power
of 2. So VF can request any number queues from 1 to 16.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
i40e_aq_set_rss_lut should set register according
to the vsi->type. if not, VF may overwrite the rigister
of PF.
Note, only X722 is impacted, since flag I40E_FLAG_RSS_AQ_CAPABLE
is only enabled on X722.
Fixes: d0a349409b ("i40e: support AQ based RSS config")
Cc: stable@dpdk.org
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
On replenishing Rx buffers for vectorized Rx, mbuf->buf_addr isn't needed
to be accessed as it is static and easily calculated from the mbuf address.
Accessing the mbuf content causes unnecessary load stall and it is worsened
on ARM.
Fixes: 545b884b1d ("net/mlx5: fix buffer address posting in SSE Rx")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
sprintf function is not secure as it doesn't check the length of string.
More secure function snprintf is used
Fixes: 828d51d8fc ("bus/fslmc: refactor scan and probe functions")
Fixes: c22fab9a6c ("raw/dpaa2_qdma: support configuration APIs")
Fixes: e5cbdfc537 ("crypto/dpaa2_sec: add basic operations")
Fixes: b23d4e898a ("crypto/dpaa2_sec: add per dev mempool to store FLE")
Fixes: 623326dded ("crypto/dpaa2_sec: introduce poll mode driver")
Fixes: e7a45f3cc2 ("crypto/caam_jr: add UIO specific operations")
Fixes: f44bccadd8 ("crypto/caam_jr: add device basic operations")
Fixes: 7e3e2954e0 ("crypto/dpaa_sec: move mempool allocation to config")
Fixes: c3e85bdcc6 ("crypto/dpaa_sec: add crypto driver for NXP DPAA platform")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The Netronome's Network Flow Processor chip is highly programmable
with the goal of processing packets at high speed. Processing units
and other chip components are available from the host through the
PCIe CPP(Command Push Pull bus) interface. The NFP PF PMD configures
a CPP handler for setting up and working with vNICs, perform actions
like link up or down, or accessing extended stats from the MAC component.
There exist NFP host tools which access the NFP components for
programming and debugging but they require the CPP interface. When the
PMD is bound to the PF, the DPDK app owns the CPP interface, so these
host tools can not access the NFP through other means like NFP kernel
drivers.
This patch adds a CPP bridge using the rte_service API which can be
enabled by a DPDK app. Interestingly, DPDK clients like OVS will not
enable specific service cores, but this can be performed with a
secondary process specifically enabling this CPP bridge service and
therefore giving access to the NFP to those host tools.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
libgen.h is not used, so do not include it.
Fixes: fefed3d1e6 ("enic: new driver")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
