Replace gettimeofday() with clock_gettime(CLOCK_MONOTONIC_RAW, &now),
the reason is same with
commit d08d304508 ("eal/linux: make alarm not affected by system time
jump")
Fixes: 81d53291a4 ("net/hinic/base: add various headers")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
For ovs offload scenario, when fw processes the virtio header,
there is no need to offset; and for standard card scenarios,
fw does not care about the vhd_type parameter, so in order to
be compatible with these two scenarios, use 0 offset instead.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Following commit updated the error codes:
commit 2ae8e130cf ("net/hinic/base: modify returned error values")
In that commit 'ETIME' errors are not used because it is not supported
by FreeBSD, instead in this patch converting relevant error codes to
'ETIMEDOUT'.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When the filter rule needs to use the TCAM method, driver
enables the TCAM filter switch, otherwise disables it, which
can improve the performance of microcode in FDIR scenarios that
does not use TCAM method.
Fixes: 1fe89aa37f ("net/hinic: add flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Add output buffer and out size info for some cmds that use management
sync channel, which can improve dfx capability when sent msg failed.
Fixes: 7fcd6b05b9 ("net/hinic/base: support cmdq mechanism")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Remove its own bit operation APIs and use the common one,
this can reduce the code duplication largely.
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
The patch modifies the comments of structures or functions, and adds
space for comments, removes extra empty lines and adjusts the
print level for VF branches in one sdk interface.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
If hardware mode for this card does not support nic,
the network features for this card will not be supported
and driver will be initialized failed.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
When FW is hotactive which means updating the FW but not needs
to reboot OS, FW returns HINIC_DEV_BUSY_ACTIVE_FW for pf driver
because firmware is being reinitialized, at which point the cmdq
initialization that relies on the fw channel will fail, so driver
should reinit the cmdq when port start.
Fixes: 0194313b2d ("net/hinic/base: fix port start during FW hot update")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
The patch supports pause flow control, including getting or
setting rx_pasue, tx_pause and auto_neg, auto_neg is just
for Electric port type.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
The patch supports filter type of inner VXLAN or non vxlan dport,
and use TCAM method to config these rules.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
The maximum doorbell area is initialized from hardware param, and not
uses const macro param.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
When repeatedly hotupdate firmware and start/stop port at the same time,
port start may be failed when cmdq reinit failed at the FW active phase,
so if cmdq fails, then reinit the cmdq when port start.
Fixes: d9ce191794 ("net/hinic/base: add hardware operation")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch makes IO memory allocation with socketid,
the txq or rxq descriptor and IO resource can be allocated with
socketid that passed by queue setup ops, which can improve
performance for cross-numa scene.
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
gcc 10.0.1 reports:
../drivers/net/hinic/base/hinic_pmd_hwdev.c: In function ‘print_cable_info’:
../drivers/net/hinic/base/hinic_pmd_hwdev.c:1398:3:
warning:
‘snprintf’ argument 4 may overlap destination object ‘tmp_str’
[-Wrestrict]
1398 | snprintf(tmp_str + strlen(tmp_str), (sizeof(tmp_str) - 1),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1399 | "%s, Temperature: %u", tmp_str,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1400 | info->cable_temp);
| ~~~~~~~~~~~~~~~~~
The warning is that tmp_str is in both src and dest.
Anyway, the current code is incorrect and because of the +strlen
the existing string will be repeated twice and max length
does not limit to the end of the string.
Fix by removing tmp_str from the src of snprintf and adding the
correct max length.
Fixes: d9ce191794 ("net/hinic/base: add hardware operation")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The header file rte_config.h is always included by make or meson.
If required in an exported API header file, it must be included
in the public header file for external applications.
In the internal files, explicit include of rte_config.h is useless,
and can be removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch fixs the code style check issue for MACRO_ARG_REUSE.
Fixes: b8582d051a ("net/hinic/base: add HW interfaces for SR-IOV")
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch adds fdir config operation, including set fdir filter,
normal filter, set and clear fdir tcam.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch adds unicast and multicast set interfaces.
Application can add or remove unicast MAC address, also can set
multicast MAC address, the maximum multicast list size is 2048.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch introduces some HW interfaces required for SR-IOV function,
including: init hwdev, set port state, get default cos,
VF DMA attribute table, VF txrx flush and so on.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Add mbox command channel for SR-IOV, which is used to
communicate between VF and VF, VF and PF. This patch
introduces data structures, initialization, interfaces
and commands of mbox channel.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Using spin lock to protect critical resources
of sending mgmt messages. This will make high
CPU usage for rte_delay_ms when sending mgmt
messages frequently. We can use mutex to protect
the critical resources and usleep to reduce CPU
usage while keep functioning properly.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Add build and doc files along with hinic_pmd_ethdev.c
which just includes PMD register and log initialization
for compilation.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add various headers that define mgmt commands, cmdq commands
and basic defines for use in the code.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Work queue is used for cmdq and Rx/Tx buff description.
NIC business needs to configure cmdq context and txq/rxq
context. This patch adds data structures and function codes
for work queue and context.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The items of configurations and queries for NIC business include
MAC, VLAN, MTU, RSS and so on. These configurations and queries
are handled by mgmt module. This patch introduces related
data structures and function codes.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add code for hardware operation, including configuration,
query and so on.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Mgmt module is a kind of administration module for the chip.
It is responsible for handling administration command from host.
It uses api channel. This patch adds related data structures,
packaged interfaces and function codes.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Eqs include aeq and ceq. PMD supports aeq only. Aeq is a kind of
queue for mgmt asynchronous message and mgmt command response message.
This patch introduces data structures, initialization, and related
interfaces about aeq.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Microcode is named ucode in Hi1822. Its main responsibility is data
transmission and reception. But it can also handle some administration
works. It uses cmdq mechanism. This patch introduces data structures,
initialization, interfaces, and commands sending functions of cmdq.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
API command channel is for communicating with mgmt module of chip.
This patch introduces data structures, initialization, interfaces,
and commands sending functions of API command channel.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds some HW interfaces for bar operation interfaces,
including: mapped bar address getting, HW attributes getting,
msi-x reg operation, function type getting and so on.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>