Add common APIs for configuring packet transfer from ethernet Rx
queues to event devices across HW & SW packet transfer mechanisms.
A detailed description of the adapter is contained in the header's
comments.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The PMD callbacks are used by the rte_event_eth_rx_xxx() APIs to
configure and control the ethernet receive adapter if packet transfers
from the ethdev to eventdev is implemented in hardware.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The caps API allows application to retrieve capability information
needed to configure the ethernet Rx adapter for the eventdev and
ethdev pair.
For e.g., the ethdev, eventdev pairing maybe such that all of the
ethdev Rx queues can only be connected to a single event queue, in
this case the application is required to pass in -1 as the queue id
when adding a receive queue to the adapter.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit adds the new_event_threshold port attribute, so the entire port
configuration structure passed to rte_event_queue_setup can be queried.
Signed-off-by: Gage Eads <gage.eads@intel.com>
This commit adds three new queue attributes, so that the entire queue
configuration structure passed to rte_event_queue_setup can be queried.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Naming convention for event drivers is "rte_pmd_<name>_event_version.map"
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit bumps the library version to refect the ABI change
caused by removing the individual rte_event_port_count, queue_count,
and other get functions. These functions are superseded by the
get-attribute style API, which allows fetching values without API/ABI
changes.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit adds an attribute to the eventdev, allowing applications
to retrieve if the eventdev is running or stopped. Note that no API
or ABI changes were required in adding the statistic, and code changes
are minimal.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit adds a generic queue attribute function. It also removes
the previous rte_event_queue_priority() and priority() functions, and
updates the map files and unit tests to use the new attr functions.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit adds a device attribute function, allowing flexible
fetching of device attributes, like port count or queue count.
The unit tests and .map file are updated to the new function.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This commit reworks the port functions to retrieve information
about the port, like the enq or deq depths. Note that "port count"
is a device attribute, and is added in a later patch for dev attributes.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Update doxygen to make it clear that RTE_EVENT_OP_FORWARD and
RTE_EVENT_OP_RELEASE must only be enqueued to the same port that the
original event was dequeued from.
Signed-off-by: Tim McDaniel <timothy.mcdaniel@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Events sent through single-link queues are naturally in-order and
atomic, without reordering or atomic scheduling. Logically the
nb_atomic_flows and nb_atomic_order_sequences arguments don't apply to a
single link queue, but applications must set these (depending on the queue
config type) to bypass the is_valid_{ordered, atomic}_queue_conf() checks
in the eventdev layer.
This commit updates those is_valid_* functions to ignore queues with the
SINGLE_LINK flag, to simplify their configuration.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch adds an union in VhostUserMsg to distinguish between
master and slave initiated requests, instead of casting slave
requests as master request.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Added new callbacks to notify about socket connection status.
As destroy_device is used for virtqueue processing *pause* as well as
connection close, the user has no distinction between those.
Consider the following scenario:
rte_vhost: received SET_VRING_BASE message,
calling destroy_device() as usual
user: end-user asks to remove the device (together with socket file),
OK, device is not *in use* - that's NOT the behavior we want
calling rte_vhost_driver_unregister() etc.
Instead of changing new_device/destroy_device callbacks and breaking
the ABI, a set of new functions new_connection/destroy_connection
has been added.
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Fix calling strncpy with the a maximum size equal of destination
array size.
Coverity issue: 140732
Fixes: e3b434818b ("net/virtio-user: support kernel vhost")
Cc: stable@dpdk.org
Signed-off-by: Sebastian Basierski <sebastianx.basierski@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
To use pointer instead of memcpy can save many cycles in the funciton
virtio_send_command.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Fixed a comment in struct virtionet_ctl, referring to the ring type
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
As soon as a page used by a ring is invalidated, the access_ok flag
is cleared, so that processing threads try to map them again.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Translating the start addresses of the rings is not enough, we need to
be sure all the ring is made available by the guest.
It depends on the size of the rings, which is not known on SET_VRING_ADDR
reception. Furthermore, we need to be be safe against vring pages
invalidates.
This patch introduces a new access_ok flag per virtqueue, which is set
when all the rings are mapped, and cleared as soon as a page used by a
ring is invalidated. The invalidation part is implemented in a following
patch.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
When IOMMU is enabled, the ring addresses set by the
VHOST_USER_SET_VRING_ADDR requests are guest's IO virtual addresses,
whereas Qemu virtual addresses when IOMMU is disabled.
When enabled and the required translation is not in the IOTLB cache,
an IOTLB miss request is sent, but being called by the vhost-user
socket handling thread, the function does not wait for the requested
IOTLB update.
The function will be called again on the next IOTLB update message
reception if matching the vring addresses.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
This patch postpones rings addresses translations and checks, as
addresses sent by the master shuld not be interpreted as long as
ring is not started and enabled[0].
When protocol features aren't negotiated, the ring is started in
enabled state, so the addresses translations are postponed to
vhost_user_set_vring_kick().
Otherwise, it is postponed to when ring is enabled, in
vhost_user_set_vring_enable().
[0]: http://lists.nongnu.org/archive/html/qemu-devel/2017-05/msg04355.html
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
numa_realloc() reallocates the virtio_net device structure and
updates the vhost_devices[] table with the new pointer if the rings
are allocated different NUMA node.
Problem is that vhost_user_msg_handler() still dereferences old
pointer afterward.
This patch prevents this by fetching again the dev pointer in
vhost_devices[] after messages have been handled.
Fixes: af295ad469 ("vhost: realloc device and queues to same numa node as vring desc")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
When VHOST_USER_F_PROTOCOL_FEATURES is negotiated, the ring is not
enabled when started, but enabled through dedicated
VHOST_USER_SET_VRING_ENABLE request.
When not negotiated, the ring is started in enabled state, at
VHOST_USER_SET_VRING_KICK request time.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Replace rte_vhost_gpa_to_vva() calls with vhost_iova_to_vva(), which
requires to also pass the mapped len and the access permissions needed.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
This patch introduces vhost_iova_to_vva() function to translate
guest's IO virtual addresses to backend's virtual addresses.
When IOMMU is enabled, the IOTLB cache is queried to get the
translation. If missing from the IOTLB cache, an IOTLB_MISS request
is sent to Qemu, and IOTLB cache is queried again on IOTLB event
notification.
When IOMMU is disabled, the passed address is a guest's physical
address, so the legacy rte_vhost_gpa_to_vva() API is used.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Vhost-user device IOTLB protocol extension introduces
VHOST_USER_IOTLB message type. The associated payload is the
vhost_iotlb_msg struct defined in Kernel, which in this was can
be either an IOTLB update or invalidate message.
On IOTLB update, the virtqueues get notified of a new entry.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The per-virtqueue IOTLB cache init is done at virtqueue
init time. init_vring_queue() now takes vring id as parameter,
so that the IOTLB cache mempool name can be generated.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
In order to be able to handle other ports or queues while waiting
for an IOTLB miss reply, a pending list is created so that waiter
can return and restart later on with sending again a miss request.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
These defines and enums have been introduced in upstream kernel v4.8,
and backported to RHEL 7.4.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Currently, only QEMU sends requests, the backend sends
replies. In some cases, the backend may need to send
requests to QEMU, like IOTLB miss events when IOMMU is
supported.
This patch introduces a new channel for such requests.
QEMU sends a file descriptor of a new socket using
VHOST_USER_SET_SLAVE_REQ_FD.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
send_vhost_message() is currently only used to send
replies, so it modifies message flags to perpare the
reply.
With upcoming channel for backend initiated request,
this function can be used to send requests.
This patch introduces a new send_vhost_reply() that
does the message flags modifications, and makes
send_vhost_message() generic.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
In the non-mergeable receive case, when copy_mbuf_to_desc()
call fails the packet is skipped, the corresponding used element
len field is set to vnet header size, and it continues with next
packet/desc. It could be a problem because it does not know why
it failed, and assume the desc buffer is large enough.
In mergeable receive case, when copy_mbuf_to_desc_mergeable()
fails, packets burst is simply stopped.
This patch makes the non-mergeable error path to behave as the
mergeable one, as it seems the safest way. Also, doing this way
will simplify pending IOTLB miss requests handling.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
This reverts commit 04d8122796 ("vhost: workaround MQ fails to
startup").
As agreed when this workaround was introduced, it can be reverted
as Qemu v2.10 that fixes the issue is now out.
The reply-ack feature is required for vhost-user IOMMU support.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The unscrutinized value may be incorrectly assumed to be within a certain
range by later operations.
In vhost_user_read: An unscrutinized value from an untrusted source used
in a trusted context - the value of sz_payload may be harmfull and we need
limit them to the max value of payload.
Coverity issue: 139601
Fixes: 6a84c37e39 ("net/virtio-user: add vhost-user adapter layer")
Cc: stable@dpdk.org
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The simple Rx handler is selected even if Rx checksum offload is
requested by the application, but this handler does not support
offloads. This results in broken received packets (no checksum flag but
invalid checksum in the mbuf data).
Disable the simple Rx handler in that case.
Fixes: 96cb671193 ("net/virtio: support Rx checksum offload")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Split use_simple_rxtx into use_simple_rx and use_simple_tx,
and ensure that only use_simple_tx is updated when txq flags
forces to use the standard Tx handler.
This change is also useful for next commit (disable simple Rx
path when Rx checksum is requested).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Since commit f27769f796 ("mk: require SSE4.2 support on all x86
platforms"), SSE4.2 is a requirement when compiling on x86 platforms.
We can remove this check in the virtio driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The selection of Rx/Tx handlers is done at several places,
group them in one function set_rxtx_funcs().
The update of hw->use_simple_rxtx is also rationalized:
- initialized to 1 (prefer simple path)
- in dev configure or rx/tx queue setup, if something prevents from
using the simple path, change it to 0.
- in dev start, set the handlers according to hw->use_simple_rxtx.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
In rx/tx queue setup functions, some code is executed only if
use_simple_rxtx == 1. The value of this variable can change depending on
the offload flags or sse support. If Rx queue setup is called before Tx
queue setup, it can result in an invalid configuration:
- dev_configure is called: use_simple_rxtx is initialized to 0
- rx queue setup is called: queues are initialized without simple path
support
- tx queue setup is called: use_simple_rxtx switch to 1, and simple
Rx/Tx handlers are selected
Fix this by postponing a part of Rx/Tx queue initialization in
dev_start(), as it was the case in the initial implementation.
Fixes: 48cec290a3 ("net/virtio: move queue configure code to proper place")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The mbuf->port was was not properly set for the first received
mbufs. Fix this by setting it in virtqueue_enqueue_recv_refill_simple(),
which is used to enqueue the first mbuf in the ring.
The function virtio_rxq_rearm_vec(), which is used to rearm the ring
with new mbufs, is correct and does not need to be updated.
Fixes: cab0461234 ("virtio: fill Rx avail ring with blank mbufs")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
On error, we should log with error level.
Fixes: 9f4f2846ef ("virtio: support vlan filtering")
Fixes: 86d59b2146 ("net/virtio: support LRO")
Fixes: 96cb671193 ("net/virtio: support Rx checksum offload")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
As described in API documentation, the field hw_ip_checksum
requests both L3 and L4 offload.
Fixes: dad1ec72a3 ("doc: document NIC features")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
This reverts
commit 4dab342b75 ("net/virtio: do not falsely claim to do IP checksum").
The description of rxmode->hw_ip_checksum is:
hw_ip_checksum : 1, /**< IP/UDP/TCP checksum offload enable. */
Despite its name, this field can be set by an application to enable L3
and L4 checksums. In case of virtio, only L4 checksum is supported and
L3 checksums flags will always be set to "unknown".
Fixes: 4dab342b75 ("net/virtio: do not falsely claim to do IP checksum")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
This reverts
commit 701a64622c ("net/virtio: do not claim to support LRO")
Setting rxmode->enable_lro is a way to tell the host that the guest is
ok to receive tso packets. From the guest point of view, it is like
enabling LRO on a physical driver.
Fixes: 701a64622c ("net/virtio: do not claim to support LRO")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
