Implement rte_pci_map_device() to distinguish between the devices bound
to netuio and NDIS devices.
Only return success for the netuio devices.
Fixes: c76ec01b4591 ("bus/pci: support netuio on Windows")
Cc: stable@dpdk.org
Suggested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Tested-by: Narcisa Vasile <navasile@linux.microsoft.com>
With I/O BAR, we get PIO (port-mapped I/O) address.
With MMIO (memory-mapped I/O) BAR, we get mapped virtual address.
We distinguish PIO and MMIO by their address range like how kernel does,
i.e, address below 64K is PIO.
ioread/write8/16/32 is provided to access PIO/MMIO.
By the way, for virtio on arch other than x86, BAR flag indicates PIO
but is mapped.
Signed-off-by: Huawei Xie <huawei.xhw@alibaba-inc.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
Currently virtio PMD assumes legacy device uses PIO bar.
There are three ways to get PIO (port-mapped I/O) address for virtio
legacy device.
1) under igb_uio
- get PIO address from uio/uio# sysfs attribute, for instance:
/sys/bus/pci/devices/0000:00:09.0/uio/uio0/portio/port0/start
2) under uio_pci_generic
- for X86, get PIO address from /proc/ioport
- for other ARCH, get PIO address from standard PCI sysfs attribute,
for instance: /sys/bus/pci/devices/0000:00:09.0/resource
Actually, "port0/start" in igb_uio and "resource" point to exactly the
same thing, i.e, pci_dev->resource[0] in kernel source code.
This patch refactors these messy things, and uses standard PCI sysfs
attribute "resource".
Signed-off-by: Huawei Xie <huawei.xhw@alibaba-inc.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
NetUIO device class and interface GUIDs are defined in system
headers starting from platform SDK v10.0.20253. Inspect SDK
version to avoid redefinition.
Pre-release SDKs do not promise compatibility and a narrow
subset of SDKs may still be subject to redefinition.
Fixes: c76ec01b4591 (bus/pci: support netuio on Windows)
Cc: stable@dpdk.org
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
On older processors, NUMA isn't bound to PCIe locality.
those cases return ERROR_NOT_FOUND in response to the
SetupDiGetDevicePropertyW call with DEVPKEY_Device_Numa_Node
attribute.
This error fails the probe process for the PCIe device.
this commit will ignore such failure and will set the
numa_node to 0.
Fixes: b762221ac24f ("bus/pci: support Windows with bifurcated drivers")
Cc: stable@dpdk.org
Reported-by: Odi Assli <odia@nvidia.com>
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Tested-by: Odi Assli <odia@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Length of hardware IDs list is limited by REGSTR_VAL_MAX_HCID_LEN [1],
which is currently 1024. With the old limit of 260, obtaining the list
could fail in a rare occasion of a very long result (no examples known).
This also removes a bogus dependency on the maximum path length.
[1]: https://docs.microsoft.com/en-us/windows-hardware/drivers/install/hardware-ids
Fixes: b762221ac24f ("bus/pci: support Windows with bifurcated drivers")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Fix redefinition of GUID, missing from previous versions.
Fixes: b762221ac24f ("bus/pci: support Windows with bifurcated drivers")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Thomas Monjalon <thomas@monjalon.net>
The original triple negative was hard to read and the attempt
to improve the formulation was commendable, unfortunately the new
comment is the inverse of correct.
Fixes: a65a34a85ebf ("eal: replace usage of blacklist/whitelist in enums")
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Gaetan Rivet <grive@u256.net>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Rename the enum values in the EAL include files.
As a backward compatible temporary migration tool, define
a replacement mapping for old values.
The old names relating to blacklist and whitelist are replaced
by block list and allow list, but applications may be using the
older compatibility macros, marked as deprecated.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Gaetan Rivet <grive@u256.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
A lot of drivers export headers, reproduce the same facility than for
libraries.
Note: this change fixes an issue with the crypto scheduler headers which
were not installed properly. A separate backport will be sent to stable
branches.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The function pci_update_device was used to scan a device
for probing by PCI address.
This private function (and implementations) are unused
since such probing is removed.
Fixes: f3bac43b60da ("bus/pci: remove unused function to probe by address")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
When reading bus and segment values using SPDRP_BUSNUMBER
bits 24-31 are undefined.
They are cleared to verify we read the segment number correctly.
Fixes: c3adf8144a17 ("bus/pci: support segment as address domain on Windows")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
This patch adds implementations to probe PCI devices bound to netuio
with the help of "netuio" class device changes.
Now Windows will support both "netuio" and "net" device class and
can set kernel driver type based on the device class selection.
Note: Few definitions and structures have been copied from
netuio_interface.h file from
("[v5] windows/netuio: add Windows NetUIO kernel driver") series
and this will be fixed once the exact path for netuio source code is known.
Signed-off-by: John Alexander <john.alexander@datapath.co.uk>
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Reviewed-by: Tal Shnaiderman <talshn@nvidia.com>
Reviewed-by: Narcisa Vasile <navasile@linux.microsoft.com>
Set the domain value for rte_pci_addr probing on Windows
to the value of the PCI segment returned by SPDRP_BUSNUMBER.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
When a device is inserted into an existing BDF slot
that has not been probed, we must overwrite the old
PCI ID with the ID of the new function. Otherwise
we may not probe the function with the correct driver,
if at all.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
As decided in the Technical Board in November 2019,
the kernel module igb_uio is moved to the dpdk-kmods repository
in the /linux/igb_uio/ directory.
Minutes of Technical Board meeting:
https://mails.dpdk.org/archives/dev/2019-November/151763.html
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The variables 'vfio_res->nb_maps' and 'i' are of type int. The type
casting of 'vfio_res->nb_maps' is redundant and not required.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently, only the 'vfio_dev_fd' is closed in failure path, so
some resources are not released(such as 'vfio_group_fd'). The
rte_vfio_release_device() should be used to avoid this problem.
Fixes: 33604c31354a ("vfio: refactor PCI BAR mapping")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
The 'vfio_res' is not freed when unmapping resource by primary process.
This leads to memory leak.
Fixes: ab53203e194b ("vfio: enable unmapping resource for secondary")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
When the BAR contains MSI-X table, pci_vfio_mmap_bar() tries to skip
the table and map the rest. "map around it" is the phrase used in the
source. The function splits the BAR into two regions: the region
before the table (first part or memreg[0]) and the region after the
table (second part or memreg[1]).
For hardware that has MSI-X vector table offset 0, the first part does
not exist (memreg[0].size == 0).
Capabilities: [60] MSI-X: Enable- Count=48 Masked-
Vector table: BAR=2 offset=00000000
PBA: BAR=2 offset=00001000
The mapping part of the function maps the first part, if it
exists. Then, it maps the second part, if it exists and "if mapping the
first part succeeded".
The recent change that replaces MAP_FAILED with NULL breaks the "if
mapping the first part succeeded" condition (1) in the snippet below.
void *map_addr = NULL;
if (memreg[0].size) {
/* actual map of first part */
map_addr = pci_map_resource(...);
}
/* if there's a second part, try to map it */
if (map_addr != NULL // -- (1)
&& memreg[1].offset && memreg[1].size) {
[...]
}
if (map_addr == NULL) {
RTE_LOG(ERR, EAL, "Failed to map pci BAR%d\n",
bar_index);
return -1;
}
When the first part does not exist, (1) sees map_addr is still NULL,
and the function fails. This behavior is a regression and fails
probing hardware with vector table offset 0.
Previously, (1) was "map_addr != MAP_FAILED", which meant
pci_map_resource() was actually attempted and failed. So, expand (1)
to check if the first part exists as well, to match the semantics of
MAP_FAILED.
Bugzilla ID: 539
Fixes: e200535c1ca3 ("mem: drop mapping API workaround")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This declaration is the same as the one a few lines before.
Fixes: 6844d146ff39 ("eal: add bus pointer in device structure")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Now that the pci_map_resource API is private to the PCI bus, we can drop
the compatibility workaround we had implemented in 20.08.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
As reported during 20.08 work for Windows, the pci_map_resource API was
built with the assumption that its flags would be passed to mmap().
This introduced a regression when adding the rte_mem_map API as reported
in the workaround commit 9d2b24593724 ("pci: keep API compatibility with
mmap values").
This API was only used in the PCI bus code, so move it there.
There is no code change happening during the move.
The only change is in the pci_map_resource description where the
additional flags are now documented as rte_mem_map API flags:
- * The additional flags for the mapping range.
+ * The additional rte_mem_map() flags for the mapping range.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The rte_kernel_driver enum actually only pointed at PCI drivers and is
only used in the PCI subsystem.
Remove it from the generic device API and use a private enum in the PCI
code.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Swap subsystem vendor id and subsystem device id.
Parse the SPDRP_HARDWAREID string with correct type values.
Fixes: b762221ac24 ("bus/pci: support Windows with bifurcated drivers")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Make is not supported for compiling DPDK, the config files are no
longer needed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The function pci_map_resource() returns MAP_FAILED in case of error.
When replacing the call to mmap() by rte_mem_map(),
the error code became NULL, breaking the API.
This function is probably not used outside of DPDK,
but it is still a problem for two reasons:
- the deprecation process was not followed
- the Linux function pci_vfio_mmap_bar() is broken for i40e
The error code is reverted to the Unix value MAP_FAILED.
Windows needs to define this special value (-1 as in Unix).
After proper deprecation process, the API could be changed again
if really needed.
Because of the switch from mmap() to rte_mem_map(),
another part of the API was changed: "int additional_flags"
are defined as "additional flags for the mapping range"
without mentioning it was directly used in mmap().
Currently it is directly used in rte_mem_map(),
that's why the values rte_map_flags must be mapped (sic) on the mmap ones
in case of Unix OS.
These are side effects of a badly defined API using Unix values.
Bugzilla ID: 503
Fixes: 2fd3567e5425 ("pci: use OS generic memory mapping functions")
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Lihong Ma <lihongx.ma@intel.com>
Uses SetupAPI.h functions to scan PCI tree.
Uses DEVPKEY_Device_Numa_Node to get the PCI NUMA node.
Uses SPDRP_BUSNUMBER and SPDRP_BUSNUMBER to get the BDF.
scanning currently supports types RTE_KDRV_NONE.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Added <sys/types.h> in rte_pci header file
to include off_t type since it is missing for Windows.
Define the implementation of the Linux function rte_pci_get_sysfs_path
in pci_common.c for Linux OS only as it is unneeded for other OSs
and to avoid the warning on deprecated call to getenv() on Windows:
"warning: 'getenv' is deprecated: This function or variable may be unsafe.
Consider using _dupenv_s instead."
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Changing all of PCIs Unix memory mapping to the
new memory allocation API wrapper.
Change all of PCI mapping function usage in
bus/pci to support the new API.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
To fix CVE-2020-12888, the linux vfio-pci module will invalidate mmaps
and block MMIO access on disabled memory, it will send a SIGBUS to the
application:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=abafbc551fdd
When the application opens the vfio PCI device, the vfio-pci module will
enable the bus memory space through PCI read/write access. According to
the PCIe specification, the 'Memory Space Enable' is always zero for VF:
Table 9-13 Command Register Changes
Bit Location | PF and VF Register Differences | PF | VF
| From Base | Attributes | Attributes
-------------+--------------------------------+------------+-----------
| Memory Space Enable - Does not | |
| apply to VFs. Must be hardwired| Base | 0b
1 | to 0b for VFs. VF Memory Space | |
| is controlled by the VF MSE bit| |
| in the VF Control register. | |
-------------+--------------------------------+------------+-----------
Afterwards the vfio-pci will initialize its own virtual PCI config space
data ('vconfig') by reading the VF's physical PCI config space, then the
'Memory Space Enable' bit in vconfig will always be 0b value. This will
make the vfio-pci treat the BAR memory space as disabled, and the SIGBUS
will be triggered if access these BARs.
By investigation, the VF PCI device *passthrough* into the Guest OS by
QEMU has the 'Memory Space Enable' with 1b value. That's because every
PCI driver will start to enable the memory space, and this action will
be hooked by vfio-pci virtual PCI read/write to set the 'Memory Space
Enable' in vconfig space to 1b. So VF runs in guest OS has 'Mem+', but
VF runs in host OS has 'Mem-'.
Align with PCI working mode in Guest/QEMU/Host, in DPDK, enable the PCI
bus memory space explicitly to avoid access on disabled memory.
Fixes: 33604c31354a ("vfio: refactor PCI BAR mapping")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Harman Kalra <hkalra@marvell.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Tested-by: Thierry Martin <thierry.martin.public@gmail.com>
In order to optimize the PCI management, RTE_KDRV_NONE based
device driver probing removed by not adding them to list in
the scan phase.
The legacy virtio is the only consumer of RTE_KDRV_NONE based device
driver probe scheme. The legacy virtio support will be available
through the existing VFIO/UIO based kernel driver scheme.
This patch also removes the deprecation notice for the same.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
rte_bus_scan API scans all the available PCI devices irrespective of white
or black listing parameters then further devices are probed based on white
or black listing parameters. So unnecessary CPU cycles are wasted during
rte_pci_scan.
For Octeontx2 platform with core frequency 2.4 Ghz, rte_bus_scan consumes
around 26ms to scan around 90 PCI devices but all may not be used by the
application. So for the application which uses 2 NICs, rte_bus_scan
consumes few microseconds and rest time is saved with this patch.
Patch restricts devices to be scanned as per below mentioned conditions:
- All devices will be scanned if no parameters are passed.
- Only white listed devices will be scanned if white list is available.
- All devices, except black listed, will be scanned if black list is
available.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Gaetan Rivet <grive@u256.net>
rte_pci_probe() is private to the PCI bus.
Clean the remaining references in the documentation and comments.
Fixes: c752998b5e2e ("pci: introduce library and driver")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Gaetan Rivet <grive@u256.net>
Some machines may have a lot of PCI devices and all of them are
not bound to DPDK. In such case the logs from EAL creates a lot of
clutter on boot-up, typically one needs to scroll the screen to
find other issues in boot-up.
This patch changes the following to reduce the clutter in
the default boot-up logs.
- Change the log-level of PCI probes to `debug`
- Introduce new driver probe as `info` log-level for the successful probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
For PCI devices presented through igb_uio, pcidev->mem_resource[] is
not populated when the device is initialized for secondary process.
Initialize pcidev->mem_resource[] with pci-bar mapped addresses.
Fixes: eee16c964cd6 ("pci: support multiple PCI regions per device")
Cc: stable@dpdk.org
Signed-off-by: Vijaya Mohan Guvva <vijay1054@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
All recent POWER systems, Power 8 and 9 specifically, support an IOMMU
(it can't be disabled). The functionality of the IOMMU is different
depending on whether it's running on a bare metal PowerNV system or in
a virtual environment (PowerVM LPAR or KVM/QEMU). DPDK currently
supports the IOMMU found on PowerNV platforms, sPAPRv2, so IOVA=VA
mode can be enabled when the correct platform is detected.
The POWER IOMMU type can't be detected through mechanisms such as
parsing files in the /sys hierarchy like x86_64 systems so the
/proc/cpuinfo file is parsed to determine whether Linux is running
on bare metal (i.e. PowerNV) or in a virtual environment (KVM/QEMU).
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
As per the comments in this code section, since there is a matching device,
it is now its responsibility to manage the devargs we've just inserted.
But the matching device ptr's devargs is still uninitialized or not pointing
to the newest dev_args that were passed as a parameter to local_dev_probe().
This is needed particularly in the case when *probe is called again* on an
already probed device as part of adding a representor port to OVS-DPDK.
Fixes: 7e8b26650146 ("eal: fix hotplug add / remove")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Gaetan Rivet <grive@u256.net>
When probing, a bus is responsible for filling the driver field to
indicate the device is bound.
Let's clear this field when detaching to keep a consistent behavior.
This is not a fix per se, since the device is freed when detaching.
But at least clearing the field has been added to remind that the
driver field has a meaning for the EAL.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Currently, the next address picked by PCI mapping infrastructure
may be page-unaligned due to BAR length being smaller than page size.
This leads to a situation where the requested map address is invalid,
resulting in mmap() call returning an arbitrary address,
which will later interfere with device BAR mapping in secondary processes.
Fix it by always aligning the next requested address on page boundary.
Fixes: c752998b5e2e ("pci: introduce library and driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaofeng Deng <dengxiaofeng@huawei.com>
Signed-off-by: Wangyu (Eric) <seven.wangyu@huawei.com>
Acked-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Acked-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Gavin Hu <gavin.hu@arm.com>
When 32-bit application is built on 64-bit system it is possible that
the offset of the resource is outside of the 32-bit value.
The problem with the unsigned long is, that it is 32-bit and not 64-bit
when using armhf compiler. Although the system is returning u64 value,
we are losing it's value if it's higher than 32-bit in the conversion
process. It can further cause mmap to fail due to offset being 0 or to
map not intended memory region.
To make it more portable, the uint64_t value is now being used for
storing offset instead of unsigned long. The size of being 32-bit seems
to be fine as the 32-bit application won't be able to access bigger
memory and it is further converted to size_t anyway. But for better
readability and to be consistent, it's type was changed to size_t as
well.
Fixes: 0205f873557c ("vfio: fix overflow of BAR region offset and size")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
