Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Make is no longer supported, RTE_SDK, RTE_TARGET and CONFIG options
are no longer in use.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Make is no longer supported, the test script for make builds is no
longer required. Uses of make in other tool scripts are replaced.
Signed-off-by: Ciara Power <ciara.power@intel.com>
The page "Development Kit Build System" was about make,
so it has been removed. A better help is in the Linux guide
(note: mlx4/mlx5 are supported on Linux only for now).
Fixes: 3cc6ecfdfe ("build: remove makefiles")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ciara Power <ciara.power@intel.com>
Tests requiring hugepages do not work outside of VM environment because
of security limitations. Add aarch64 builds which run tests to run in
a VM to avoid these limitations. Leave non-hugepage environments since
the tests may produce different results in hugepage and non-hugepage
environments.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
This patch fixes an issue that uninitialized 'success'
is used to be compared with '0'.
Coverity issue: 337676
Fixes: 3340202f59 ("stack: add lock-free implementation")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Replace the store-release by relaxed for the CAS success at the end of
pop. Release isn't needed, because there is not write to data that need
to be synchronized.
The only preceding write is when the length is decreased, but the length
CAS loop already ensures the right synchronization.
The situation to avoid is when a thread sees the old length but the new
list, that doesn't have enough items for pop to success.
But the CAS success on length before the pop loop ensures any core reads
and updates the latest length, preventing this situation.
The store-release is also used to make sure that the items are read
before the head is updated, in order to prevent a core in pop to read an
incorrect value because another core rewrites it with push.
But this isn't needed, because items are read only when removed from the
used list. Right after this, they are pushed to the free list, and the
store-release in push makes sure the items are read before they are
visible in the free list.
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
List head must be loaded right before continue (when failed to
find the new head).
Without this, one thread might keep trying and failing to pop items
without ever loading the new correct head.
Fixes: 7e6e609939 ("stack: add C11 atomic implementation")
Cc: gage.eads@intel.com
Cc: stable@dpdk.org
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
The load-acquire of list->len on pop function is redundant.
Only the CAS success needs to be load-acquire.
It synchronizes with the store release in push, to ensure that the
updated head is visible when the new length is visible.
Without this, one thread in pop could see the increased length but the
old list, which doesn't have enough items yet for pop to succeed.
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
An acquire fence is used to make sure loads after the fence can observe
all store operations before a specific store-release.
But push doesn't read any data, except for the head which is part of a
CAS operation (the items on the list are not read).
So there is no need for the acquire barrier.
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Fix cmpexchange usage of weak / strong.
The generated code is the same on x86 and ARM (there is no weak
cmpexchange), but the old usage was inconsistent.
For push and pop update size, weak is used because cmpexchange is inside
a loop.
For pop update root, strong is used even though cmpexchange is inside a
loop, because there may be a lot of operations to do in a loop iteration
(locate the new head).
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Remove the part that checks if there is enough room in the stack, it's
always true as long as size of stack >= MAX_BULK*rte_lcore_count().
This check used an atomic cmpset, and read / write to a shared size
variable. These operations result in some form of synchronization
that might get in the way of the actual stack testing.
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Use rte_eal_wait_lcore to wait and get the return value for all cores.
This is used to propagate any error to the main core.
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Replace the arguments array by one argument.
All objects in the args array have the same values, so there is no need
to use an array, only one struct is enough.
The args object is a lot smaller, and the allocation can be replaced
with a global variable.
As a consequence of using a single argument, there is no need to use a
loop to launch the test on every core one by one. Replace it with
rte_eal_mp_remote_launch.
The allocation of obj_table isn't needed either, because MAX_BULK is
small. The allocation can instead be replaced with a static array.
Signed-off-by: Steven Lariau <steven.lariau@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gage Eads <gage.eads@intel.com>
When generating the documentation, a new warning can be seen:
.../dpdk/lib/librte_ethdev/rte_ethdev.h:2441:
warning: argument 'link_speed' of command @param is not found in the
argument list of rte_eth_link_speed_to_str(uint32_t speed_link)
.../dpdk/lib/librte_ethdev/rte_ethdev.h:2455: warning: The following
parameters of rte_eth_link_speed_to_str(uint32_t speed_link) are not
documented: parameter 'speed_link'
Align the function prototype to its doxygen description.
Fixes: fbf931c9c3 ("ethdev: format link status text")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
When the --werror meson build option is set, we can set the WARN_AS_ERRORS
doxygen option in the doxygen config flag to get the same behaviour for API
doc building as for building the rest of DPDK. This can help catch
documentation errors sooner in the development process.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
To see only errors and warnings from the doc builds, we can send the
standard output text to a logfile and have only the stderr messages
printed. This is similar to what is done for the API documentation.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The meson documentation states that projects should not rely upon the
custom_target build commands are run from any given directory. Therefore,
rather than writing the standout output from doxygen to the current
directory - which could be anywhere in future, put it into the api
directory, so that it is in a known location.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The API docs were output to "<build>/doc/api/api" folder, which was
ugly-looking with the repeated "api", and inconsistent with the sphinx
guides which were written to "<build>/doc/guides/html". Changing the
doxygen output folder to "html" fixes both these issues.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The standard output of doxygen is very verbose, and since ninja mixes
stdout and stderr together it makes it difficult to see any warnings from
the doxygen run. Therefore, we can just log the standard output to file,
and only output the stderr to make warnings clear.
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Starting from Linux 5.9 'get_user_pages_remote()' API doesn't get
'struct task_struct' parameter:
commit 64019a2e467a ("mm/gup: remove task_struct pointer for all gup code")
The change reflected to the KNI with version check.
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch fixes the possible time-of-check to time-of-use (TOCTOU)
attack problem by copying request data and descriptor index to local
variable prior to process.
Also the original sequential read of descriptors may lead to TOCTOU
attack. This patch fixes the problem by loading all descriptors of a
request to local buffer before processing.
CVE-2020-14375
Fixes: 3bb595ecd6 ("vhost/crypto: add request handler")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
This patch fixes the incorrect data length check to vhost crypto.
Instead of blindly accepting the descriptor length as data length, the
change compare the request provided data length and descriptor length
first. The security issue CVE-2020-14374 is not fixed alone by this
patch, part of the fix is done through:
"vhost/crypto: fix missed request check for copy mode".
CVE-2020-14374
Fixes: 3c79609fda ("vhost/crypto: handle virtually non-contiguous buffers")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
This patch fixes vhost crypto library for the incorrect source and
destination buffer calculation in the copy mode.
Fixes: cd1e8f03ab ("vhost/crypto: fix packet copy in chaining mode")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
This patch fixes the incorrect descriptor deduction for vhost crypto.
CVE-2020-14378
Fixes: 16d2e718b8 ("vhost/crypto: fix possible out of bound access")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
This patch fixes the missing iv space allocation in crypto
operation mempool.
Fixes: 709521f4c2 ("examples/vhost_crypto: support multi-core")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Commit d0fcc38f5f ("vhost: improve device readiness notifications")
makes the assumption that every Virtio devices are considered
ready for preocessing as soon as first queue pair is configured
and enabled.
While this is true for Virtio-net, it isn't for Virtio-scsi
and Virtio-blk.
This patch fixes this by only making this assumption for
the builtin Virtio-net backend, and restores back to previous
behaviour for other backends.
Fixes: d0fcc38f5f ("vhost: improve device readiness notifications")
Reported-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
When the BAR contains MSI-X table, pci_vfio_mmap_bar() tries to skip
the table and map the rest. "map around it" is the phrase used in the
source. The function splits the BAR into two regions: the region
before the table (first part or memreg[0]) and the region after the
table (second part or memreg[1]).
For hardware that has MSI-X vector table offset 0, the first part does
not exist (memreg[0].size == 0).
Capabilities: [60] MSI-X: Enable- Count=48 Masked-
Vector table: BAR=2 offset=00000000
PBA: BAR=2 offset=00001000
The mapping part of the function maps the first part, if it
exists. Then, it maps the second part, if it exists and "if mapping the
first part succeeded".
The recent change that replaces MAP_FAILED with NULL breaks the "if
mapping the first part succeeded" condition (1) in the snippet below.
void *map_addr = NULL;
if (memreg[0].size) {
/* actual map of first part */
map_addr = pci_map_resource(...);
}
/* if there's a second part, try to map it */
if (map_addr != NULL // -- (1)
&& memreg[1].offset && memreg[1].size) {
[...]
}
if (map_addr == NULL) {
RTE_LOG(ERR, EAL, "Failed to map pci BAR%d\n",
bar_index);
return -1;
}
When the first part does not exist, (1) sees map_addr is still NULL,
and the function fails. This behavior is a regression and fails
probing hardware with vector table offset 0.
Previously, (1) was "map_addr != MAP_FAILED", which meant
pci_map_resource() was actually attempted and failed. So, expand (1)
to check if the first part exists as well, to match the semantics of
MAP_FAILED.
Bugzilla ID: 539
Fixes: e200535c1c ("mem: drop mapping API workaround")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since rte_atomicXX APIs are not allowed to be used, use C11 atomic
builtins for link status update.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since rte_atomicXX APIs are not allowed to be used, use C11 atomic
builtins for power in use state update.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: David Hunt <david.hunt@intel.com>
Since rte_atomicXX APIs are not allowed to be used, use C11 atomic builtins
for device processing counter.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Since rte_atomicXX APIs are not allowed to be used, use C11 builtins to
check if EAL is already initialized.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Replace use of RTE_MACHINE_CPUFLAG macros with regular compiler
macros, which are more complete than those provided by DPDK, and as such
it allows new instruction sets to be leveraged without having to do
extra work to set them up in DPDK.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
This patch updates Mellanox maintainers mails from
the Mellanox domain to Nvidia domain.
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Removed the documentation maintainers.
The documentation is now, currently, unmaintained.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Since the 20.08 release deprecated rte_cio_*mb APIs because these APIs
provide the same functionality as rte_io_*mb APIs on all platforms, so
remove them and use rte_io_*mb instead.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Add more parameters into the macro TEST_RING_VERIFY and expand the scope
of application for it. Then replace all ring APIs check with
TEST_RING_VERIFY to facilitate debugging.
Furthermore, correct a spelling mistakes of the macro
TEST_RING_FULL_EMTPY_ITER.
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Do code clean up by moving repeated code inside 'test_ring_mem_cmp'
function to validate data and print information of enqueue/dequeue
elements if validation fails.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Validate the return value of single element enqueue/dequeue operation in
the test.
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add check in test_ring_basic_ex and test_ring_with_exact_size for single
element enqueue and dequeue operations to validate the dequeued objects.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When using memcmp function to check data, the third param should be the
size of all elements, rather than the number of the elements.
Fixes: a9fe152363 ("test/ring: add custom element size functional tests")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The ring capacity is (RING_SIZE - 1), thus only (RING_SIZE - 1) number of
elements can be enqueued into the ring.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When enqueue one element to ring in the performance test, a pointer
should be passed to rte_ring_[sp|mp]enqueue APIs, not the pointer
to a table of void *pointers.
Fixes: a9fe152363 ("test/ring: add custom element size functional tests")
Cc: stable@dpdk.org
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Flow Manager (flowman) provides DECAP_STRIP operation which
decapsulates VXLAN header and then removes VLAN header from the inner
packet. Use this operation to support vxlan_decap followed by
of_pop_vlan.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
When VXLAN source port in the template is zero, the adapter is
expected to generate a value based on the inner packet flow, when it
performs encapsulation. Flow Manager in the VIC adapter currently
lacks such ability. So, generate a random port when creating a flow if
the port is zero, to avoid transmitting packets with source port 0.
Fixes: ea7768b5bb ("net/enic: add flow implementation based on Flow Manager API")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
