With symbols going though experimental/stable stages, we accumulated
a lot of discrepancies about inclusion of the rte_compat.h header.
Some headers are including it where unneeded, while others rely on
implicit inclusion.
Fix unneeded inclusions:
$ git grep -l include..rte_compat.h |
xargs grep -LE '__rte_(internal|experimental)' |
xargs sed -i -e '/#include..rte_compat.h/d'
Fix missing inclusion, by inserting rte_compat.h before the first
inclusion of a DPDK header:
$ git grep -lE '__rte_(internal|experimental)' |
xargs grep -L include..rte_compat.h |
xargs sed -i -e \
'0,/#include..\(rte_\|.*pmd.h.$\)/{
s/\(#include..\(rte_\|.*pmd.h.$\)\)/#include <rte_compat.h>\n\1/
}'
Fix missing inclusion, by inserting rte_compat.h after the last
inclusion of a non DPDK header:
$ for file in $(git grep -lE '__rte_(internal|experimental)' |
xargs grep -L include..rte_compat.h); do
tac $file > $file.$$
sed -i -e \
'0,/#include../{
s/\(#include..*$\)/#include <rte_compat.h>\n\n\1/
}' $file.$$
tac $file.$$ > $file
rm $file.$$
done
Fix missing inclusion, by inserting rte_compat.h after the header guard:
$ git grep -lE '__rte_(internal|experimental)' |
xargs grep -L include..rte_compat.h |
xargs sed -i -e \
'0,/#define/{
s/\(#define .*$\)/\1\n\n#include <rte_compat.h>/
}'
And finally, exclude rte_compat.h itself.
$ git checkout lib/eal/include/rte_compat.h
At the end of all this, we have a clean tree:
$ git grep -lE '__rte_(internal|experimental)' |
xargs grep -L include..rte_compat.h
buildtools/check-symbols.sh
devtools/checkpatches.sh
doc/guides/contributing/abi_policy.rst
doc/guides/rel_notes/release_20_11.rst
lib/eal/include/rte_compat.h
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
This patch replaces instances of zero-sized arrays i.e. those at the end
of structures with "[0]" with the more standard syntax of "[]".
Replacement was done using coccinelle script, with some revert and
cleanup of whitespace afterwards.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Fixing the IV calculation for ZUC based short MAC-I
as per the HW security engine guidelines.
Fixes: 73a24060cd ("crypto/dpaa2_sec: add sample PDCP descriptor APIs")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Remove sec era 1 to 7 IPsec and caam operations code
as none of the NXP platform use it.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
DPAA1 and DPAA2 platforms use SEC ERA 8 and 10 only.
Hence, code related to old SEC-ERA (1-7) is removed.
This patch removes code in SDAP and PDCP header related to these
ERA to simplify the codebase:
- Simplify logic using RTA_SEC_ERA_<> macro
- Remove era_2_sw_hfn_ovrd dedicated to RTA_SEC_ERA_2
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Functions like free, rte_free, and rte_mempool_free
already handle NULL pointer so the checks here are not necessary.
Remove redundant NULL pointer checks before free functions
found by nullfree.cocci
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The DPAA DMA driver is an implementation of the dmadev APIs,
that provide means to initiate a DMA transaction from CPU.
The initiated DMA is performed without CPU being involved
in the actual DMA transaction. This is achieved via using
the QDMA controller of DPAA SoC.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
If some of the VA entries of table are somehow not populated and are
NULL, it can add offset to NULL and return the invalid VA in PA to
VA conversion.
In this patch, adding a check if the VA entry has valid address only
then add offset and return VA.
Fixes: 2f3d633aa5 ("common/dpaax: add library for PA/VA translation table")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The logic was incorrectly doing conditional swap. It need to
be bit swap always.
Fixes: 73a24060cd ("crypto/dpaa2_sec: add sample PDCP descriptor APIs")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The space in descriptor buffer is scarce as it is limited to
64 words for platforms except ERA10 (which has 128).
As the descriptors are processed with QI, it adds some words
to the descriptor which is passed.
Some descriptors used for SDAP were using too much words reaching
the limit.
This patch reduces the number of words used by removing the inlining
of some keys (done for performance) in order to have working
descriptors.
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
For SDAP, we are not using the protocol operation to perform
4G/LTE operation so the DPOVRD option is not used.
Removing it save some space in the descriptor buffer and
execution time.
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The offset of the HFN word and Bearer/Dir word is different
depending on type of PDB.
The wrong value was used.
This patch address this issue
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The header files argp.h and error.h do not exist in musl libc.
Fix build with musl libc by using err(3) instead of
the GNU-specific error(3).
We could have used the identical errx("...: %s", strerror(ret))` but
strerror(3) is not thread-safe and the strerror_r variant has two
incompatible versions, one GNU specific and one XSI-compliant.
Avoid the mess by letting "err" use the thread-local errno.
This also fixes error message for kzmalloc failures which previously
would always have given "Unknown error -1", since that is what
strerror(-1) returns. Let "err" use the proper error message from errno
which is set by kzalloc.
Fixes: 9d32ef0f5d ("bus/dpaa: support creating dynamic HW portal")
Fixes: f09ede6c8f ("bus/dpaa: add BMAN driver core")
Fixes: 5b22cf7446 ("bus/dpaa: introducing FMan configurations")
Fixes: 39f373cf01 ("bus/dpaa: add compatibility and helper macros")
Cc: stable@dpdk.org
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
Simplify pr_debug, pr_err and pr_warn macros by adding an intermediate
pr_msg macro. This way we only need to test for SUPPRESS_PRINTS once.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
The swab16/swab32/swab64 are Linux specific and not GNU libc specific.
Keep the check for __GLIBC__ just in case other GNU systems depends on
this (Hurd or GNU/kFreeBSD).
This fixes a build error with musl libc.
Fixes: 04711d41a8 ("crypto/dpaa2_sec: add run-time assembler for descriptor")
Cc: stable@dpdk.org
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
The feature macro _GNU_SOURCE is defined globally,
but there was some remaining useless settings.
The internal definition in config/meson.build is kept,
all other internal definitions of _GNU_SOURCE are removed,
except in examples, which can be built as external applications.
Note: external applications do not inherit of _GNU_SOURCE.
Fixes: 5d7b673d5f ("mk: build with _GNU_SOURCE defined by default")
Fixes: 28188cee2a ("build: enable BSD features visibility for FreeBSD")
Fixes: e6cdc54cc0 ("net/mlx5: add socket server for external tools")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
This patch adds support for AES_CMAC integrity in non-security mode.
This patch modifies the camm flib to handles the AES CMAC
without conflicting the proto ALG operations. i.e. by creating
another ALG operation routine.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The descriptor sharing needed to be changed for ZUC+ZUC as we
were getting invalid CHA combination error due to sharing
being done on DECOs simultaneously.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Reasons for building not supported generally start with lowercase
because printed as the second part of a line.
Other changes:
- "linux" should be "Linux" with a capital letter.
- ARCH_X86_64 may be simply x86_64.
- aarch64 is preferred over arm64.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
The SDAP is a protocol in the LTE stack on top of PDCP. It is
dedicated to QoS.
The difficulty of implementing this protocol is because the
PDCP change behavior regarding encryption and authentication
of the SDU it receives. In effect PDCP shall not encrypt the
SDAP SDU but must authenticate it (when encryption and
authentication is enabled).
The current version of SEC does not support the SDAP and the
change of behavior of PDCP prevent the use of the PDCP
protocol command available.
The way to do it is to reuse the PDCP implementation but to
not use the PDCP protocol and to have descriptors which
performs the PDCP protocol.
It is implemented by doing small changes of code:
#ifdef SDAP_SUPPORT
length += SDAP_BYTE_SIZE;
offset -= SDAP_BYTE_SIZE;
#endif
after having computed the size of the SN to read from the
input data, then
#ifdef SDAP_SUPPORT
MATHI(p, MATH0, LSHIFT, 8, MATH1, 8, 0);
MATHB(p, MATH1, AND, sn_mask, MATH1, 8, IFB | IMMED2);
#else
MATHB(p, MATH0, AND, sn_mask, MATH1, 8, IFB | IMMED2);
#endif
It will keep the SN and the SDAP header in MATH0, then shift
it to remove the SDAP header and store the result in MATH1.
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
In case of LX2160 or SEC ERA >= 10, max anti replay window
size supported is 1024. For all other versions of SEC, the
maximum value is capped at 128 even if application gives
more than that.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Yi Liu <yi.liu@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
added support for non-HMAC for auth algorithms
(SHA1, SHA2, MD5).
Corresponding capabilities are enabled so that test
application can enable those test cases.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
RTE_ARCH_xx flags are used to distinguish platform architectures.
These flags can be used to pick different code paths for different
architectures at compile time.
For Arm platforms, there are 3 flags in use: RTE_ARCH_ARM,
RTE_ARCH_ARMv7 and RTE_ARCH_ARM64.
RTE_ARCH_ARM64 is for 64-bit aarch64 platforms,
and RTE_ARCH_ARM & RTE_ARCH_ARMv7 are for 32-bit platforms.
RTE_ARCH_ARMv7 is for ARMv7 platforms as its name suggested.
The issue is meaning of RTE_ARCH_ARM is not clear enough.
Because no info about platform word length is included in the name.
To make the flag names more clear, a naming scheme is proposed.
RTE_ARCH_ARM (all Arm platforms)
|
+----RTE_ARCH_32 (New. 32-bit platforms of all architectures)
| |
| +----RTE_ARCH_ARMv7 (ARMv7 platforms)
| |
| +----RTE_ARCH_ARMv8_AARCH32 (aarch32 state on aarch64 machine)
|
+----RTE_ARCH_64 (64-bit platforms of all architectures)
|
+----RTE_ARCH_ARM64 (64-bit Arm platforms)
RTE_ARCH_32 will be explicitly defined for 32-bit platforms.
To fit into the new naming scheme, current usage of RTE_ARCH_ARM in
project is mapped to (RTE_ARCH_ARM && RTE_ARCH_32).
Matching flags for other architectures are:
RTE_ARCH_X86
|
+----RTE_ARCH_32
| |
| +----RTE_ARCH_I686
| |
| +----RTE_ARCH_X86_X32
|
+----RTE_ARCH_64
|
+----RTE_ARCH_X86_64
RTE_ARCH_PPC_64 ---- RTE_ARCH_64
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Remove the deprecated unioned fields phys_addr
from the structures rte_memseg and rte_memzone.
They are replaced with the fields iova which are at the same offsets.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Enable/disable link state interrupt and get link state api is
defined using IOCTL calls from kernel driver
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
In case of LX2160, PROTOCOL command can be used in some of the PDCP
cases, in those the jump command prior to KEY command may not be
required.
The issue observed due to these JUMP command on LX2160 is that,
the CAAM gets stuck and the processing never get completed. The
system becomes unusable.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
In cases of NULL auth in PDCP, the descriptors
should be based on ALGORITHM command instead of
PROTOCOL command.
It was done in case of encap, but was missing in
decap.
Fixes: 526cdf60f1 ("crypto/dpaa2_sec: update desc for PDCP 18-bit enc-auth")
Cc: stable@dpdk.org
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The maximum length of job descriptor which is formed
is 13 words and hence rta_inline_query should take
care of the max descriptor(shared + job) lengths and
thus find out of the key can be referenced or immediate.
Fixes: 05b12700cd ("crypto/dpaa_sec: support null algos for protocol offload")
Fixes: 13273250ee ("crypto/dpaa2_sec: support AES-GCM and CTR")
Cc: stable@dpdk.org
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
In case of RTA_SEC_ERA = 8, where the length of shared desc
is large for some of PDCP cases, the descriptor buffer cannot
hold 2 extra words when HFN override is enabled. As a result,
the descriptor fails.
This patch converts one of the keys from immediate key to
reference key hence reducing the length of the descriptor.
Fixes: 2e4cbdb4b2 ("crypto/dpaax_sec: support PDCP U-Plane with integrity")
Cc: stable@dpdk.org
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Now that all libraries have a single version, we can drop the empty
stable blocks that had been added when moving symbols from stable to
internal ABI.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch moves the internal symbols to INTERNAL sections
so that any change in them is not reported as ABI breakage.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
gcc 10 defaults to -fno-common and as a result when linking
with crypto drivers:
drivers/librte_pmd_dpaa_sec.a(crypto_dpaa_sec_dpaa_sec.c.o):
(.bss+0x4): multiple definition of `rta_sec_era';
drivers/librte_pmd_caam_jr.a(crypto_caam_jr_caam_jr.c.o):
(.bss+0x0): first defined here
drivers/librte_pmd_dpaa2_sec.a(crypto_dpaa2_sec_dpaa2_sec_dpseci.c.o):
(.data+0x0): multiple definition of `rta_sec_era';
drivers/librte_pmd_caam_jr.a(crypto_caam_jr_caam_jr.c.o):
(.bss+0x0): first defined here
This patch fixes the blunt workaround in the following commit.
Fixes: 50b03f3b8e ("drivers/crypto: disable gcc 10 no-common errors")
Bugzilla ID: 469
Cc: stable@dpdk.org
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Kevin Traynor <ktraynor@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
There is a common macro __rte_unused, avoiding warnings,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a macro __rte_noinline, preventing function to be inlined,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_aligned for alignment,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The protocol aware ipsec descriptor has been modified to
use ctr_initial value of 1 and salt configured for ipsec SA.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
