strcat does not check the destination length and there might be
chances of string overflow so instead of strcat, strlcat is used.
Fixes: 6f4eec2565 ("test/crypto: enhance scheduler unit tests")
Cc: stable@dpdk.org
Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds result field to modular exponentiation and
modular multiplicative inverse tests
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
User can specify stats period(n). The statistics should be available
to user every n second. But the print_stats() function does not
force stdout to be flushed, so for instance, a user reading testpmd's
stdout through pipe will not be able to read it until the stdout
buffer is filled.
Fixes: cfea1f3048 ("app/testpmd: print statistics periodically")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch fixes a typo in test-pmd/cmdline.c,
succcessfully->successfully
Two C's are good enough for success...
Fixes: a09f3e4c50 ("app/testpmd: add hash configuration")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Improved MAC swap performance for ARM platform.
The improvement was achieved by using neon intrinsics
to save CPU cycles and doing swap for four packets
at a time.
The optimization had 15% - 20% throughput boost
in testpmd MAC swap mode.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Currently, rte_realloc will not respect original allocation's
NUMA node when memory cannot be resized, and there is no
NUMA-aware equivalent of rte_realloc. This patch adds such a function.
The new API will ensure that reallocated memory stays on
requested NUMA node, as well as allow moving allocated memory
to a different NUMA node.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Start event producers after eventdev i.e. consumer is started as in some
architectures it might lead to undefined behaviour or events being
dropped.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Previously, the total number of event timers per adapter was set to an
arbitrary value, set it to mempool size instead as it defines the max
event timers that can be armed.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Rather than using linuxapp and bsdapp everywhere, we can change things to
use the, more readable, terms "linux" and "freebsd" in our build configs.
Rather than renaming the configs we can just duplicate the existing ones
with the new names using symlinks, and use the new names exclusively
internally. ["make showconfigs" also only shows the new names to keep the
list short] The result is that backward compatibility is kept fully but any
new builds or development can be done using the newer names, i.e. both
"make config T=x86_64-native-linuxapp-gcc" and "T=x86_64-native-linux-gcc"
work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro and all instances in DPDK code, but keep a copy of
the old macro defined for legacy code linking against DPDK
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro to make things shorter and more comprehensible. For
both meson and make builds, keep the old macro around for backward
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
These duplicate device id is causing incorrect mapping
for DPAA_SEC for test case execution on the basis of
capabilities.
Fixes: e155ca055e ("test/crypto: add tests for AMD CCP")
Cc: stable@dpdk.org
Reported-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This commit fixes a bug in which a unidirectional pdump could attempt to
remove devices it didn't create.
Fixes: 35cb223ab7 ("app/pdump: fix vdev cleanup")
Cc: stable@dpdk.org
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
The call to strlcpy uses either libc, libbsd or internal rte_strlcpy.
No need to call the DPDK flavor explicitly.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
usleep() is defined in unistd.h, which is missing from include list
in test_compressdev.c, causing compiler errors on FreeBSD.
Fixes: b06aa643ca ("test/compress: add initial unit tests")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Since all other apps have been moved to the "app" folder, the autotest app
remains alone in the test folder. Rather than having an entire top-level
folder for this, we can move it back to where it all started in early
versions of DPDK - the "app/" folder.
This move has a couple of advantages:
* This reduces clutter at the top level of the project, due to one less
folder.
* It eliminates the separate build task necessary for building the
autotests using make "make test-build" which means that developers are
less likely to miss something in their own compilation tests
* It re-aligns the final location of the test binary in the app folder when
building with make with it's location in the source tree.
For meson builds, the autotest app is different from the other apps in that
it needs a series of different test cases defined for it for use by "meson
test". Therefore, it does not get built as part of the main loop in the
app folder, but gets built separately at the end.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Move to "app" directory and enable with meson build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Move app to "app" directory and enable with meson build. For consistency of
naming, the subdirectory is also renamed from cmdline_test to test-cmdline.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Function cmd_config_tx_metadata_specific_parsed() takes input value,
applies rte_cpu_to_be_32() on it, and stores it for Tx use.
Function cmd_show_tx_metadata_parsed() displays the stored value as is.
This patch modifies function cmd_show_tx_metadata_parsed(), to apply
rte_be_to_cpu_32() on the stored value before displaying it.
Fixes: c18feafa19 ("app/testpmd: support metadata as flow rule item")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Virtual devices added in pdump application
using rte_eal_hotplug_add should be removed explicitly
while exiting the pdump application, otherwise the
subsequent run of the pdump application will fail with the reason
that virtual devices with the same name already exists in primary.
Fixes: 6362f362a2 ("app/pdump: use EAL hotplug instead of ethdev attach")
Cc: stable@dpdk.org
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Let's check the received/sent mbufs, it can help debugging.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Prefetching packet was missing when do_macswap() was optimized.
Fixes: 62b52877ad ("app/testpmd: batch MAC swap for performance on x86")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The pointer is misused and could set wrong MAC address. As a result, some
of packets can be dropped in receiver side due to MAC address mismatch.
This can be shown as performance degradation.
Bugzilla ID: 188
Fixes: 62b52877ad ("app/testpmd: batch MAC swap for performance on x86")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch proposes a slightly different test-pmd quit operation: stop
all devices before starting to close any device. Basically, stop all
moving parts before beginning to remove them. The current test-pmd quit
is stopping and closing each device before moving to the next device.
If all devices in the system are independent of each other, this
difference is usually not important. In case of Soft NIC devices, any
such virtual device typically depends on one or more physical devices
being alive, as it accesses their queues, so this difference becomes
important.
Without this straightforward fix, all the Soft NIC devices need to be
manually stopped before the quit command is issued, otherwise the quit
command can sometimes crash the test-pmd application.
Fixes: d3a274ce9d ("app/testpmd: handle SIGINT and SIGTERM")
Cc: stable@dpdk.org
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Added assert check for rte_bbdev_*_op_alloc_bulk in bbdev test app
Coverity issue: 328516, 328525
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
This patch uses the two session mempool approach to crypto perf
application. One mempool is for session header objects, and the other
is for session private data.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch changes the cryptodev queue pair configure structure
to enable two mempool passed into cryptodev PMD simutaneously.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Function iter_mempool is used for iterating slected mempool elements
and display the contents of elements for a max of 256 bytes. In case
of invalid or no name for mempool, no information is displayed.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_mempool is used for displaying valid MEMPOOL.
In case of invalid or no name, whole list is dump.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_ring is used for displaying information of RING instance
of the primary process.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_crypto is used for displaying the crypto PMD under primary
process.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_tm is used for displaying the tm PMD under the primary
process. This covers basic and per node|level details with statistics.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Function show_port is used for displaying the port PMD information under
primary process. The information shows basic, per queue and security.
Also helper MACRO 'MAX_STRING_LEN, STATS_BDR_FMT and STATS_BDR_STR' and
meson build file is updated for new functionality.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
There's very commonly that more than 4G DDR memory in NIC for HQoS,
so right now the queue threshold size of RED needs to expand to
uint64_t. For struct rte_tm_red_params, it has been fixed, but for
test-pmd TM configuration, it hasn't been fixed. This patch fixes it.
Fixes: bddc2f40b5 ("app/testpmd: add commands for shaper and wred profiles")
Cc: stable@dpdk.org
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
There is need to add boundary for input number from commandline,
If it beyond the definition, code will return error.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Do four packets macswap in same loop iterate to squeeze more
CPU cycles.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The patch optimizes the mac swap operation by taking advantage
of SSE instructions, it only impacts x86 platform.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Move macswap workload to dedicate function, so we can further enable
platform specific optimized version.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add missing implementation for 64-bit log2 function, and extend
the unit test to test this new function. Also, remove duplicate
reimplementation of this function from testpmd and memalloc.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add an rte_bsf64 function that follows the convention of existing
rte_bsf32 function. Also, add missing implementation for safe
version of rte_bsf32, and implement unit tests for all recently
added bsf varieties.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Code refactoring to separate validation from benchmarking part.
Added op's status checking after rte_compressdev_dequeue_burst
function.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Added performance measurement part into compression perf. test.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Added parser part into compression perf. test.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Improvements added to interrupt test:
- test is run in loop (number of iterations is specified by
TEST_REPETITIONS define) which ensures more accurate results
- mapping cores to thread parameteres was put in order.
Master core is always set at first index. It fixes problem with
running test for only one core
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Test application and Turbo Software driver were adapted
to support chained-mbuf for bigger TB sizes.
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
